By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
Sacit
Reference: F11533
€3.35
2,77 € tax excl.
Fast delivery
2-year warranty
1 nickel-plated brass lug, clamped by 2 hexagonal head screws This lug provides an excellent electrical connection and very good tensile strength For cables up to 35 mm² Main dimensions: A: 7 mm B: 23 mm V: 14 mm L: 49 mm
In stock
Sacit
Reference: CX0530
€3.09
2,55 € tax excl.
Fast delivery
2-year warranty
Female socket for Ø 9 mm connector
Cable 10 -16 and 25 mm²
200A @ 60%
Supplier stock
Sacit
Reference: F11505
€3.84
3,17 € tax excl.
Fast delivery
2-year warranty
5 tinned copper crimp lugs for cable from 10 to 25 mm²
This lug provides an excellent electrical connection and very good tensile strength.
Main dimensions:
A: 7 mm
B: 15 mm
V: 8.4 mm
L: 36 mm
S: 1 mm
In stock
Trafimet
Reference: KCF
€3.24
2,68 € tax excl.
Fast delivery
2-year warranty
1 Female quarter-turn connector.
| Combinations | Price | |
| €4.63 | ||
| €5.63 | ||
| €3.24 | ||
In stock
Gys
Reference: AMF
€9.93
8,21 € tax excl.
Fast delivery
2-year warranty
Male / Female Adapter AMF 50/25
Note: 2 references available:
Female: Ø 9 mm - Male 13 mm for reference 038127
Female: Ø 13 mm - Male 9 mm for reference 038110
Duty cycle 300A @ 35% - 200 A @60%
| Combinations | Price | |
| €9.93 | ||
| €12.61 | ||
In stock
Trafimet
Reference: CX05
€3.18
2,63 € tax excl.
Fast delivery
2-year warranty
1 Male Quarter-Turn Connector
| Combinations | Price | |
| €6.15 | ||
| €5.40 | ||
| €6.00 | ||
| €3.18 | ||
In stock
Soudexpert
Reference: EF-1025
€2.72
2,25 € tax excl.
Fast delivery
2-year warranty
Female socket for Ø 9 mm connector
Cable 10 - 16 and 25 mm²
200A @ 60%
In stock
Soudexpert
Reference: EF-3550
€5.05
4,17 € tax excl.
Fast delivery
2-year warranty
Female socket 35-50mm
In stock
Soudexpert
Reference: EF-5070
€6.56
5,42 € tax excl.
Fast delivery
2-year warranty
Female socket 50-70mm
Discover here a wide choice of welding machine connectors for fast and safe connection whatever your welding work: male or female quarter-turn connector, socket, coupling for cables of different diameters, coupling adapter, torch adapter, sleeve, lug… You will find in this category all connectors needed for connecting your ARC MMA, TIG and MIGMAG welding machines. For years, EURO-WELDING has been selecting for you the best welding machines from leading brands as well as all professional welding accessories, equipment and consumables: Telwin, Deca, Lincoln, Gys, Kemppi, Femi, Linde…
Our business is simply the online sale of professional welding products and we offer you the widest selection of welding generators, spare parts and tools. Find your welding machine connector at the best price from a wide range of products available in stock and ready for fast delivery. Order your products at the best price and also benefit from fast delivery! At EURO-WELDING, we continuously renew and add new products and new ranges to offer them at the best prices!
Essential for welding, connectors are part of every welding machine. Choosing them correctly is necessary to achieve precise welds. The welding machine connector is used to connect the welding cable to the welding machine. It is mounted on ground and current leads. The plug and the overall socket ensure a reliable electrical connection of the cable to the welding device. It can be a male or female plug. Electrical cables can be installed in many types of potentially abrasive environments. It is therefore often necessary to protect them from mechanical and environmental damage.
The welding machine connector must therefore provide electrical insulation as well as mechanical protection. In certain cases, it must also provide watertight protection. The insulation materials and the layer applied to the conductors must be compatible with the cable materials. They may include heat-shrink or cold insulators, moulded types or special tapes. The structure of the connector depends on the intended use and application of the cable. EURO-WELDING offers different types of welding machine connectors used in semi-automatic and MMA, TIG and MIG MAG welding machines from most equipment manufacturers: Telwin, Deca, Lincoln, Gys…
Often, an arc welding machine has two identical female quick-connect quarter-turn sockets. The ground cable and the clamp cable each have a male quarter-turn connector. They are identical for the simple reason that it is possible to change the polarity depending on the weld to be performed or the type of electrode used. Here too, there are several cross-sections to be respected depending on the amperage. As for the welding cable, called the secondary cable, it connects the welding machine connector to the electrode holder clamp, the same applies to the ground clamp. The secondary cable is defined by its cross-section measured in mm², it is composed of a multitude of strands of copper wire and is generally covered with PVC. It must comply with standards H 01 N2 E and H 01 N2, which define the flexibility of the cable. Using minimum cable lengths and especially with the appropriate welding machine connector prevents overheating and consequently voltage drops.
Whether you are looking for a male or female quarter-turn connector, a coupling, an adapter for coupling, a socket, a flush-mounted terminal, a plug, a lug… and whether it is for MMA, TIG or MIG MAG arc welding, you are sure to find your welding machine connector at the best price at EURO-WELDING.
We offer powerful and reliable connectors designed for arc welding machine equipment, used in electrical machining. Each welding machine connector is essential to guarantee the performance and proper functioning of your equipment in carrying out a wide range of welding operations. Manufactured in accordance with current standards, the majority of our connectors feature a brass body. Furthermore, in addition to providing excellent insulation, a rubber sleeve is designed to ensure a perfect seal.
Male-female adapter couplings allow adaptation for cable plugs according to the desired connections. Our sockets for connectors are also available in several models: 250, 400 and 600A, among others. Feel free to also discover a wide choice of specific cables for welding, compliant with the European directive, to make ground cables and electrode holder cables…
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
