Refine your search
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
Soudexpert
Reference: JWS25
€5.76
€11.52
4,76 € tax excl.
Fast delivery
2-year warranty
Small welding magnet High holding force: 12kg Secure hold at three different angles: 45 - 90 and 135° Compact and robust, highly versatile For welding, brazing and pipe installation Enables precise and efficient welding
Supplier stock
ESAB
Reference: PET201iA
€1,391.15
€1,471.15
1 149,71 € tax excl.
or 4 x 347,79 €
Free delivery
2-year warranty
This pack contains:
- ESAB TIG 201i Pro CE welding machine
- Regulator with flow meter and column 254400
- INDUS refillable gas cylinder
By choosing this pack, you save €80 on your purchase.
Supplier stock
ESAB
Reference: PET181iA
€1,169.33
€1,249.33
966,38 € tax excl.
or 4 x 292,33 €
Free delivery
2-year warranty
This pack contains:
- ESAB TIG 181iCE welding machine
- Regulator with flow meter and column 254400
- INDUS refillable cylinder
By choosing this pack, you save €80 on your purchase.
Supplier stock
Lincoln Electric
Reference: PLSP180A
€1,949.78
€2,029.78
1 611,38 € tax excl.
or 4 x 487,45 €
Free delivery
2-year warranty
This pack contains: - Speedtec 180 C K14098-1 welding machine - W10430-25 torch - Two-gauge regulator 094200 - F11885M trolley - Rechargeable Argon/CO2 Enermix C15 cylinder
Supplier stock
Gys
Reference: PGPT200ACDCA
€1,719.88
€1,799.88
1 421,38 € tax excl.
or 4 x 429,97 €
Free delivery
2-year warranty
This pack includes 3 products:
1 GYS PROTIG 200 AC DC TIG welder, HF arc start + 4 m torch and earth clamp 08742
1 refillable gas cylinder 2.3 m3 without contract SOL Indus pure argon.
1 Column regulator
By choosing this pack, you save €80 on purchase.
Supplier stock
Telwin
Reference: PD260A
€1,985.07
€2,065.07
1 640,55 € tax excl.
or 4 x 496,27 €
Free delivery
2-year warranty
This pack includes 4 products:
- 1 TELWIN DUAL 260 multiprocess unit + 3 m MIG-MAG torch with EURO connector + earth clamp
- 1 EUROPA trolley to move the welding unit + 1 gas cylinder with a volume of up to 4 m3
- 1 Le Lorrain regulator with two pressure gauges
- 1 Enermix C15 gas cylinder for welding steel
By choosing this pack, you save €80 on purchase.
Supplier stock
Telwin
Reference: PD260B
€1,556.10
€1,586.10
1 286,04 € tax excl.
or 4 x 389,03 €
Free delivery
2-year warranty
This pack includes the 2 products below:
1 TELWIN DUAL 260 multi-process welder + 3 m MIG-MAG torch with EURO connector + earth clamp
1 EUROPA trolley to move the welding machine + 1 gas cylinder with a volume of up to 4 m3
Save 30 euros with this pack.
Supplier stock
Lincoln Electric
Reference: PLSP200B
€2,195.80
€2,275.80
1 814,71 € tax excl.
or 4 x 548,95 €
Free delivery
2-year warranty
This pack includes
1 Lincoln multi-process welder SPEEDTEC 200C
1 MIG-MAG torch 3 m long LGS 250
1 Refillable gas cylinder for steel welding, capacity 2.3 m3
1 Two-gauge regulator Le Lorrain
Supplier stock
Lincoln Electric
Reference: PLSP200A
€2,373.28
€2,453.28
1 961,38 € tax excl.
or 4 x 593,32 €
Free delivery
2-year warranty
This pack includes
1 Lincoln SPEEDTEC 200C multi-process welder
1 MIG-MAG torch 3 m length LGS 250
1 AMERICA welder + cylinder transport trolley
1 Rechargeable gas cylinder for steel welding, capacity 2.3 m3
1 Le Lorrain 2-gauge regulator
Supplier stock
Lincoln Electric
Reference: PLSP180B
€1,772.30
€1,852.30
1 464,71 € tax excl.
or 4 x 443,08 €
Free delivery
2-year warranty
This pack contains: - Speedtec 180 C welding machine K14098-1 - W10430-25 torch - Two-gauge regulator 094200 - Rechargeable Argon/Co2 Enermix C15 cylinder
Supplier stock
Gys
Reference: PGPT161B
€1,168.65
965,83 € tax excl.
or 4 x 292,16 €
Free delivery
2-year warranty
This pack includes the 3 products below:
1 GYS PROTIG 161 DC TIG welder + SR17 DB torch 4 m length and earth clamp
1 refillable gas cylinder of 2.3 m3 without contract SOL Indus pure argon.
1 Column regulator
By choosing this pack, you save €80 on your purchase.
Supplier stock
Telwin
Reference: PT236A
€631.99
€681.99
522,31 € tax excl.
or 4 x 158,00 €
Free delivery
2-year warranty
This pack includes the 4 products below: 1 MMA Inverter Technology 236 XT welding machine 1 Telwin 802937 welding helmet 1 pocket apron GA1049BST 1 pair of gloves G100501
Supplier stock
Telwin
Reference: PT186A
€605.77
€655.77
500,64 € tax excl.
or 4 x 151,44 €
Free delivery
2-year warranty
This pack includes the 4 products below: 1 MMA Inverter Technology 186 XT MPGE welding machine 1 Telwin 802937 welding helmet 1 pocket apron GA1049BST 1 pair of gloves G100501
Supplier stock
Telwin
Reference: PD222A
€2,387.73
1 973,33 € tax excl.
or 4 x 596,93 €
Free delivery
2-year warranty
This pack includes 3 products:
1 Telwin DUAL 222 multi-process welding machine
1 contract-free SOL pure Argon gas cylinder for TIG welding
1 Telwin TIG welding kit
By choosing this pack, you save €80 on your purchase.
Supplier stock
Telwin
Reference: PD225A
€1,602.90
€1,682.90
1 324,71 € tax excl.
or 4 x 400,73 €
Free delivery
2-year warranty
This pack includes 3 products:
1 Telwin DUAL 225 multi-process welding machine
1 SOL Enermix C15 contract-free gas cylinder for MIG steel welding
1 regulator with 2 pressure gauges
By choosing this pack, you save €80 at purchase.
Supplier stock
Telwin
Reference: PD215A
€1,688.62
€1,768.62
1 395,55 € tax excl.
or 4 x 422,16 €
Free delivery
2-year warranty
This pack includes 4 products:
1 Telwin DUAL 215 multi-process welder
1 no-contract gas cylinder sol Enermix C15 for MIG steel welding
1 Le Lorrain regulator with 2 gauges and protective cap
1 Telwin America model trolley
The TIG torch and electrode holder shown in the photo are available as optional accessories
By choosing this pack, you save €80 on your purchase.
Supplier stock
Telwin
Reference: PD210B
€1,184.45
€1,264.45
978,88 € tax excl.
or 4 x 296,11 €
Free delivery
2-year warranty
This pack includes 3 products:
1 Telwin DUAL 210 multi-process welding machine
1 gas cylinder without contract SOL Enermix C15 for MIG steel welding
1 Regulator with 2 gauges and protective caps Le Lorrain
The TIG torch and electrode holder shown in the photo are available as an option
By choosing this pack, you save €80 on your purchase.
Supplier stock
StrongHandTools
Reference: TD6-1212Q-K3
€3,466.65
2 865,00 € tax excl.
or 4 x 866,66 €
Free delivery
2-year warranty
Plateau dimension 1200 x 1200 mm
The table plate nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Plate thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted load: 750 kg
Supplier stock
gpph
Reference: DIY +Accessoires
€1,345.12
1 111,67 € tax excl.
or 4 x 336,28 €
Free delivery
2-year warranty
Supplier stock
Telwin
Reference: 816147 + 804416
€1,205.70
€1,294.70
996,45 € tax excl.
or 4 x 301,43 €
Free delivery
2-year warranty
In stock
StrongHandTools
Reference: TDQ612075-K1
€2,253.62
€2,504.02
1 862,50 € tax excl.
or 4 x 563,41 €
Free delivery
2-year warranty
Table top dimensions 1200 x 750 mm. Height 910mm
The table top nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Top thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted weight: 680 kg
Lockable casters + leveling feet for mobile or stationary use
Delivered with accessories.
Optional: Plasma cutting top
The plasma cutting top supports 45 kg, over a450 x 710 mm cutting surface with 14 reversible slats.
The generous width of 45 mm between the cutting blades provides sufficient space for clamping the blank holder.
The blades remain in place when the top is folded.
Cut, clamp and fasten at a single convenient mobile workstation at an ideal and uniform working height.
In stock
Gys
Reference: 065727
€543.50
449,17 € tax excl.
or 4 x 135,88 €
Free delivery
2-year warranty
The GYSMATIC 9/13 AIR TRUE COLOR XL is a welding mask equipped with a powered air purifying respiratory protection system. 2 in 1, it protects the eyes from IR/UV during welding operations and preserves the operator's airways.
• The XL lens provides an optimal field of view.
• True Color technology ensuring incredible colour accuracy during welding.
• The 5 available shades (9> 13) adapt to all welding operations. It allows TIG welding from as low as 5 A.
• The 4 solar sensors ensure very high sensitivity and an ultra-fast reaction time (0.08 ms).
• 3 adjustable airflow rates according to needs (from 170 l/min to 230 l/min).
• The lithium battery provides up to 8 hours of battery life.
• The TH2PRSL rated filter retains 99.996% of welding particles.
• Standards EN 166 / EN 175 / EN 379 / EN 12941.
• Supplied with respiratory protection system, lithium battery, EU charger, harness, flow meter.
Consumables:
- Pre-filter (ref. 038417)
- TH2 filter (ref. 038424)
- TH3 filter (ref. 065734)
In stock
LEOPARD
Reference: GJ1020
€69.58
57,50 € tax excl.
Fast delivery
2-year warranty
Welding jacket in brown split leather.
4 sizes available: S-M-L-XL
This jacket runs small, do not hesitate to order one size above your usual size
Jacket closure with buttons + velcro.
Sleeve with adjustable cuff.
1 inner pocket
Stitched with Kevlar thread
| Combinations | Price | |
| €69.58 | ||
| €69.58 | ||
| €69.58 | ||
| €69.58 | ||
Soudure pro
Reference: 010900
€28.13
23,25 € tax excl.
Fast delivery
2-year warranty
Spool of 316 L stainless steel wire Ø 0.8 mm. Weight 700 g
The use of this welding wire requires a shielding gas during operation (Argon + CO² or Argon + O²).
This wire allows welding of STAINLESS STEEL including food-grade stainless steel.
The spool diameter is Ø 100 mm
Delivered in a protective plastic film + cardboard box.
In stock
Soudexpert
Reference: 411201
€69.58
€86.97
57,50 € tax excl.
Fast delivery
2-year warranty
LCD control screen for easy and fast adjustment
MMA and TIG LIFT function
Welds coated electrodes: rutile, stainless steel, cast iron and basic between Ø1.6 and 2.5mm
On steel, cast iron and stainless steel up to 8 mm thick
Duty cycle: 60% - 70A
Inverter technology: immediate arc striking, smooth fusion and protection
Welding aids: Hot start, Arc force, Anti-stick
Power: 20-120A - 5 kVA
Open circuit voltage: 65V
Featherweight (2.5kg) - Dimensions: D26xH20xW11cm
Compact size and carrying handle
Warranty: 2 years
Delivered complete with:
- 1 Electrode holder + 12 mm² cable (1.6 meters)
- 1 Ground clamp + 12 mm² cable (1.4 meters)
- 1 220V single-phase power cable (1.5 meters)
In stock
Soudexpert
Reference: 202513-A
€45.38
€90.75
37,50 € tax excl.
Fast delivery
2-year warranty
Launch offer at -50% on limited quantities (X50)
Automatic wide-screen welding helmet XL field of view: 100x60mm Construction: PP True Colour Technology Fixed light shade: DIN3 Variable dark shade: DIN 4/5 - 9/9-13 Solar power + 1 replaceable CR2450 battery Low battery alarm and test button Number of sensors: 4 Automatically switches from light to dark shade on arc strike: less than 1/30,000 seconds Return to light state from 0.1S to 1S UV protection: DIN16 Optical class 1/1/1/1 Grinding mode Weight 550 grams
Application fields: MMA 5 to 400 / TIG 2 to 300 / MIG-MAG 5 to 400 Standards: CE / EN 175B / EN 166 / EN 379
In stock
Soudexpert
Reference: E6013201
€9.08
€15.13
7,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode STEEL CURRENT E6013
Diameter: 2 mm
Rod length: 300 mm
Carton of 1 kg
1 kg is equivalent to +/- 94 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Piping
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Soudexpert
Reference: PM-90021
€10.59
€15.13
8,75 € tax excl.
Fast delivery
2-year warranty
Magnetic ground clamp 400 Amperes
Strong hold
Reduced electrical voltage drop
Ideal for welding parts with a large flat surface
Cable cross-section: 70 mm2
Magnet length: 94mm x 36mm
Weight: 850 grams
In stock
Gys
Reference: 047846
€741.13
612,50 € tax excl.
or 4 x 185,28 €
Free delivery
2-year warranty
The GYSMATIC 5/13 AIR TRUE COLOR XXL is a welding mask equipped with a powered air-purifying respirator system. 2 in 1, it protects the eyes from IR/UV during welding operations and preserves the operator's respiratory tract.
• The XXL screen provides an optimal field of vision.
• True Color technology guaranteeing incredible color accuracy during welding.
• The 9 available shades (5> 13) adapt to all welding operations. It offers the possibility of TIG welding from 2 A.
• The 4 solar sensors guarantee very high sensitivity and an ultra-fast reaction time (0.08 ms).
• 3 adjustable airflow rates according to need (from 170 l/min to 230 l/min).
• The lithium battery allows up to 8 hours of autonomy.
• The filter rated TH2PRSL retains 99.996% of welding particles.
• Standards EN 166 / EN 175 / EN 379 / EN 12941.
• Supplied with powered air-purifying respirator system, lithium battery, EU charger, harness, flow meter and carry bag.
In stock
GVS
Reference: PACK-GVS
€74.97
61,96 € tax excl.
Fast delivery
2-year warranty
This pack aims to bring together the items you need to effectively protect yourself from welding fumes and odours.
This pack is intended for short-duration and/or repetitive operations.
The different welding processes emit fumes composed of fine particles that accumulate in the lungs.
Prolonged exposure causes acute and chronic conditions such as asthma, bronchitis and other lung disorders.
Furthermore, to ensure respiratory comfort, this mask protects against welding odours
The size of the half-mask included in this set is M/L.
In stock
Telwin
Reference: 816040
€1,405.11
1 161,28 € tax excl.
or 4 x 351,28 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) on steel, stainless steel, cast iron, copper, nickel, and titanium.
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It comes with a 140A trigger TIG torch 4 m in length + ground clamp.
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High-frequency NO-CONTACT arc starting
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tack welding of parts before welding.
HOT START adjustable: additional starting power when an electrode is difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overload and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
(automatically adjusted by the microprocessor according to the current intensity and welding duration.
It also features the PULSE function, particularly suited for welding thin sheets where low heat input to the welded workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision also improves.
THINSPOT function, enabling fast and precise spot welding.
For connecting the machine to gas, it is recommended to use fitting 804208.
Gys
Reference: ZEUS
€90.75
75,00 € tax excl.
Fast delivery
2-year warranty
Welding helmet suitable for arc welding:
MMA (stick electrode) from 5 to 400 A
MIG-MAG (semi-automatic welding) from 5 to 400 A
TIG from 5 to 300 A
Adjustable shade: DIN 5 to 13; setting 5 to 8 for flame welding and 9 to 13 for arc welding.
Solar powered + 2 CR2450 batteries
Automatically switches from light shade to dark shade upon arc strike in 0.2 ms
Weight: 560 grams.
Viewing field 100 x 67 mm
Number of sensors: 4
Adjustable headband
Grinding position (Grind): the lens remains clear during grinding and cutting work.
Optical classification: 1/1/1/2
Compliant with standards EN 175 / EN 379
| Combinations | Price | |
| €95.80 | ||
| €90.75 | ||
In stock
Trafimet
Reference: PACK-P850
€101.69
84,04 € tax excl.
Fast delivery
2-year warranty
This kit allows you to work in complete safety.
Your hands and forearms will be protected, and the apron will protect your clothing from all hot spatter.
It includes
1 Pair of welding gloves size 10 long cuff in split leather
1 Brown welding apron in split leather 60 x 90 cm
1 Automatic welding helmet with grinding position P 850 featuring 2 sensors - battery and solar powered.
In stock
Gys
Reference: 031432
€482.99
€536.66
399,17 € tax excl.
or 4 x 120,75 €
Free delivery
2-year warranty
Ideal and supremely powerful tool for the demanding professional
High duty cycle: 120A at 60% and 200A at 20%
Capable of welding 45 electrodes of Ø 3.2 mm in 1 hour
MMA and TIG Lift process
Current range: 10 to 200A
Welds steel, cast iron and stainless steel up to 10mm thickness
Electrode diameter: 1.6 to 5 mm
Technologies: Hot Start, Arc Force, Antisticking, PFC, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 96 V
Weight: 5.5 kg - 2-year warranty
Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 25mm²
1x Cable with electrode holder (2 meters) 25mm²
Optional: TIG valve torch - 4m - 10/25mm² (087583)
This product is Euro Welding's choice
In stock
Soudexpert
Reference: 411202
€89.74
€112.18
74,17 € tax excl.
Fast delivery
2-year warranty
Even more power for easy welding!
LCD control screen for easy and fast adjustment
MMA and TIG LIFT function
Easily welds coated electrodes: rutile, stainless steel, cast iron and basic up to Ø 4mm
on steel, cast iron and stainless steel up to 10 mm thick
Duty cycle: 60% - 85A
Inverter technology: immediate arc striking, smooth fusion and protection
Welding aids: Hot start, Arc force, Anti-stick
Power: 20-160A - 6 kVA
Open circuit voltage: 65V
Featherweight (4.5kg) - Dimensions: D26xH20xW11cm
Compact size and carrying handle
2-year warranty
Delivered complete with:
- 1 Electrode holder + 16 mm² cable (1.6 meters)
- 1 Ground clamp + 16 mm² cable (1.4 meters)
- 1 220V single-phase power cable (1.5 meters)
In stock
Soudexpert
Reference: 202513-B
€45.38
€90.75
37,50 € tax excl.
Fast delivery
2-year warranty
Launch offer at -50% on limited quantities (X50)
Automatic wide-screen welding helmet XL field of view: 100x60mm Construction: PP True Colour Technology Fixed light shade: DIN3 Variable dark shade: DIN 4/5 - 9/9-13 Solar power + 1 replaceable CR2450 battery Low battery alarm and test button Number of sensors: 4 Automatically switches from light to dark shade on arc strike: less than 1/30,000 seconds Return to light state from 0.1S to 1S UV protection: DIN16 Optical class 1/1/1/1 Grinding mode Weight 550 grams
Application fields: MMA 5 to 400 / TIG 2 to 300 / MIG-MAG 5 to 400 Standards: CE / EN 175B / EN 166 / EN 379
In stock
Soudexpert
Reference: E6013251
€8.47
€14.12
7,00 € tax excl.
Fast delivery
2-year warranty
Universal rutile MILD STEEL electrode E6013
Diameter: 2.5 mm
Rod length: 350 mm
1 kg box
1 kg equals +/- 54 rods
Arc striking from 40V - Direct current. Polarity (-) at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: PM-90022
€17.64
€25.20
14,58 € tax excl.
Fast delivery
2-year warranty
Magnetic earth clamp 600 Amperes
Strong clamping force
Reduced electrical voltage drop
Ideal for welding parts with a large flat surface
Cable cross-section: 95 mm²
Magnet length: 133mm x 25mm
Weight: 1690 grams
In stock
ESAB
Reference: 0705002006
€388.21
€431.34
320,83 € tax excl.
or 4 x 97,05 €
Free delivery
2-year warranty
Why choose the Rogue ESAB ES 151i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 150A @25%
Compact and powerful: 10–150A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 3.2 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height
Femi
Reference: 7133648
€59.93
€85.61
49,53 € tax excl.
Fast delivery
2-year warranty
Steel structure for band saw and mitre saw
Dimensions: 420x 650 x H 740 / 820 / 870
Weight: 11 kg
Max load: 50 kg
Compatible with FEMI band saw:
ABS 105 - ABS NG 160 - ABS NG 120
780XL - 782 XL - 783 XL - 784 XL - 785 XL
DCS NG 110 - NG 160
This product is Euro Welding's choice
In stock
Telwin
Reference: 816065
€2,730.22
€2,873.92
2 256,41 € tax excl.
or 4 x 682,56 €
Free delivery
2-year warranty
Multi-process Synergic Inverter welding machine with an adjustment range of 20 to 300 A, enabling:
1) Semi-automatic (welding wire) MIG-MAG, allows the use of steel, stainless steel, aluminium, brazing wire (special automotive body) with the appropriate gas, and flux-cored wire for welding steel without gas.
The ATC process guarantees less distortion of thin metals, fast and precise spot welding.
Wire driven by a motor with 4 rollers.
Excellent results on steel, stainless steel and brazing. Effective for welding aluminium.
2) Basic and rutile electrode rods from Ø 1.6 to 6 mm (electrode holder optional)
3) TIG Lift arc start for welding steel, stainless steel and ferrous alloys (TIG torch optional).
The ATC process is very effective when welding thin materials (0.5 - 0.8 mm), as it helps reduce metal distortion caused by heat build-up.
The price includes, in addition to the machine:
1 MIG/MAG torch 3 m long fitted with a 0.8 mm contact tip.
1 reversible roller for 0.6 / 0.8 mm steel wire (mounted on the machine).
1 earth clamp and cable
For connecting the machine to gas, it is recommended to use fitting 804208.
In stock
Soudexpert
Reference: 202514-B
€65.54
€131.08
54,17 € tax excl.
Fast delivery
2-year warranty
Launch offer at -50% on limited quantities (X50)
Automatic welding helmet EXTRA large screen
XXL viewing area: 100x97mm
External controls
Construction: PP
True Color technology: more realistic color rendering
Fixed light shade: DIN3
Variable dark shade: DIN 4/5 - 9/9-13
Solar powered + 1 replaceable CR2450 battery
Low battery alarm and test button
High sensitivity: 4 sensors
Fast darkening speed: 0.08 ms
Return to light state from 0.1S to 1S
UV protection: DIN16
Optical class 1/1/1/1
Grinding mode
Weight 550 grams
Applications: MMA 5 to 400 / TIG 2 to 300 / MIG-MAG 5 to 400
Standards: CE / EN 175B / EN 166 / EN 379
In stock
Soudexpert
Reference: 411203
€130.08
€162.60
107,50 € tax excl.
Free delivery
2-year warranty
Equipped with 3-meter cables to facilitate the welder's work
LCD control screen for easy and fast adjustment
MMA and TIG LIFT function
Easily welds coated electrodes: rutile, stainless steel, cast iron and basic up to Ø 4mm
on steel, cast iron and stainless steel up to 10 mm thick
Duty cycle: 60% - 90A
Inverter technology: immediate arc striking, smooth fusion and protection
Welding aids: Hot start, Arc force, Anti-stick
Power: 20-180A - 7 kVA
Open circuit voltage: 65V
Featherweight (4.7kg) - Dimensions: D26xH20xW11cm
Compact size and carrying handle
2-year warranty
Delivered complete with:
- 1 Electrode holder + 16 mm² cable (3 meters)
- 1 Ground clamp + 16 mm² cable (3 meters)
- 1 220V single-phase power cable (1.5 meters)
In stock
Soudexpert
Reference: E6013255
€18.15
€30.25
15,00 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode CURRENT E6013
Diameter: 2.5 mm
Rod length: 350 mm
Box of 5 kg
5kg equals +/- 245 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Soudexpert
Reference: 1804065
€41.65
€59.50
34,42 € tax excl.
Fast delivery
2-year warranty
FLUX-CORED STEEL welding wire (gasless) diameter 0.6 mm
Spool Ø 200mm - Weight 5 kg
Excellent arc starting properties
Use WITHOUT GAS
High arc stability at elevated currents
Good corrosion resistance of the wire
All-position welding
Applications:
General steel and ironwork applications
Railway construction
Shipbuilding
Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15
In stock
ESAB
Reference: 0705002008
€438.63
€487.36
362,50 € tax excl.
or 4 x 109,66 €
Free delivery
2-year warranty
Why choose the Rogue ESAB ES 181i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 170A @20%
Compact and powerful: 10–180A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height
In stock
Urko tools
Reference: 21-A
€4.69
3,88 € tax excl.
Fast delivery
2-year warranty
C-clamp for sheet metal.
3 possible clamping sizes.
| Combinations | Price | |
| €4.69 | ||
| €6.26 | ||
| €9.38 | ||
In stock
Soudexpert
Reference: 202514-A
€65.54
€131.08
54,17 € tax excl.
Fast delivery
2-year warranty
Launch offer at -50% on limited quantities (X50)
Automatic welding helmet EXTRA large screen
XXL viewing area: 100x97mm
External controls
Construction: PP
True Color technology: more realistic color rendering
Fixed light shade: DIN3
Variable dark shade: DIN 4/5 - 9/9-13
Solar powered + 1 replaceable CR2450 battery
Low battery alarm and test button
High sensitivity: 4 sensors
Fast darkening speed: 0.08 ms
Return to light state from 0.1S to 1S
UV protection: DIN16
Optical class 1/1/1/1
Grinding mode
Weight 550 grams
Applications: MMA 5 to 400 / TIG 2 to 300 / MIG-MAG 5 to 400
Standards: CE / EN 175B / EN 166 / EN 379
In stock
Soudexpert
Reference: 411204
€170.41
€213.01
140,83 € tax excl.
or 3 x 56,80 €
Free delivery
2-year warranty
Equipped with 3-meter cables to facilitate the welder's work
LCD control screen for easy and fast adjustment
MMA and TIG LIFT function
Easily welds coated electrodes: rutile, stainless steel, cast iron and basic up to Ø 4mm
on steel, cast iron and stainless steel up to 10 mm thick
Duty cycle: 60% - 120A
Inverter technology: immediate arc striking, smooth fusion and protection
Welding aids: Hot start, Arc force, Anti-stick
Power: 20-200A - 8.3 kVA
Open circuit voltage: 65V
Featherweight (5kg) - Dimensions: D37xH23xW13cm
Compact size and carrying handle
2-year warranty
Delivered complete with:
- 1 Electrode holder + 25 mm² cable (3 meters)
- 1 Ground clamp + 25 mm² cable (3 meters)
- 1 220V single-phase power cable (1.5 meters)
In stock
Soudexpert
Reference: E6013321
€7.86
€13.10
6,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode CURRENT E6013
Diameter: 3.2 mm
Rod length: 350 mm
1 kg box
1 kg equals +/- 32 rods
Arc start from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: 1804061
€12.71
€18.15
10,50 € tax excl.
Fast delivery
2-year warranty
FLUX-CORED STEEL welding wire (gasless) diameter 0.6 mm
Spool Ø 100mm - Weight 1 kg
Excellent arc starting properties
GAS-FREE use
High arc stability at elevated currents
Good wire corrosion resistance
All-position welding
Applications:
General steel and ironwork applications
Railway construction
Shipbuilding
Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15
Supplier stock
Gys
Reference: PGPT201ACDCA
€2,216.98
€2,296.98
1 832,21 € tax excl.
or 4 x 554,25 €
Free delivery
2-year warranty
This pack includes 4 products:
- 1 GYS PROTIG 201 AC DC TIG welder, HF ignition + 4 m torch and earth clamp 08742
- 1 rechargeable gas cylinder of 2.3 m3 without contract SOL Indus pure argon
- 1 column pressure regulator
By choosing this pack, you save €80 on purchase.
In stock
ESAB
Reference: 0705002007
€553.57
€615.08
457,50 € tax excl.
or 4 x 138,39 €
Free delivery
2-year warranty
Why choose the ESAB Rogue ES 181iP Pro?
For experienced welders looking for power
Two welding processes: MMA / Lift TIG
High duty cycle for a compact unit: 116A@60% and 180A @25%
Compact and powerful: 10–180A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for maintenance services and agriculture
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height
Jelt
Reference: Jelt56
€12.35
10,21 € tax excl.
Fast delivery
2-year warranty
3 products for complementary use:
PENETRANT:
Red dye used to highlight small defects that may cause leaks.
DEVELOPER:
White powder product. It is used in conjunction with the PENETRANT and highlights small defects that may cause leaks.
Its white powder draws out by capillary action the red penetrant embedded in the crack from a thickness of 30 microns.
Easy to apply, non-destructive testing.
CLEANER:
Surface cleaner to be used before and after dye penetrant testing.
Penetrates into the smallest cracks and removes excess PENETRANT.
| Combinations | Price | |
| €12.35 | ||
| €12.35 | ||
| €12.35 | ||
Supplier stock
Soudexpert
Reference: PACKMMA120A
€79.66
€106.21
65,84 € tax excl.
Fast delivery
2-year warranty
This pack includes: - 1 Inverter electrode welding machine, DC MMA 120A Ref 411202 - 1 automatic welding helmet Ref 202510 - 1 pair of Lucifer gloves G100501 - 1 kg rutile steel electrodes diameter 2.5 - 1 Hammer/Brush -
In stock
Soudexpert
Reference: ET-150-16G
€9.33
€18.66
7,71 € tax excl.
Fast delivery
2-year warranty
Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 1.6 mm
Very good performance in DC welding
Suitable for thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys
Use at high amperages is not recommended as the Cerium oxides will escape, thus cancelling their benefit.
In stock
Soudexpert
Reference: E6013325
€17.55
€29.25
14,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile STEEL CURRENT electrode E6013
Diameter: 3.2 mm
Rod length: 350 mm
5 kg box
5 kg is equivalent to +/- 160 rods
Arc ignition from 40V - Direct current. Negative (-) polarity at the electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framework
In stock
Soudexpert
Reference: 1804095
€33.18
€47.40
27,42 € tax excl.
Fast delivery
2-year warranty
FLUX-CORED STEEL welding wire (gasless) diameter 0.9 mm
Spool Ø 200mm - Weight 5 kg
Excellent arc starting properties
NO GAS required
High arc stability at elevated currents
Good wire corrosion resistance
All-position welding
Applications:
General steel and ironwork applications
Railway construction
Shipbuilding
Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15
In stock
ESAB
Reference: 0705002009
€700.79
€778.66
579,17 € tax excl.
or 4 x 175,20 €
Free delivery
2-year warranty
Why choose the ESAB Rogue ES 201IP Pro?
Two welding processes: MMA / Lift TIG
Duty cycle: 129A@60% and 200A @25%
Robust and powerful: 10–200A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for craftsmen and advanced DIY enthusiasts
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height
In stock
Lincoln Electric
Reference: B18257-1-P
€226.88
€283.60
187,50 € tax excl.
or 3 x 75,63 €
Free delivery
2-year warranty
Adjustment range from 10 to 160 A
High duty cycle
Operates on a standard 16 A domestic socket
Allows the use of Ø 1.6 to 4 mm electrodes
Accepts rutile and basic type electrodes
Technologies: Hot Start, Arc Force
Supplied in a carrying case with:
1x Cable with earth clamp (3 metres) (35/50 mm² connector)
1x Cable with electrode holder (3 metres) (35/50 mm² connector)
1x Power cable 1.5 metres
Telwin
Reference: 816284
€2,923.11
2 415,79 € tax excl.
or 4 x 730,78 €
Free delivery
2-year warranty
TECHNOMIG 223 TREO SYNERGIC 230V TELWIN WELDING MACHINE
Inverter multiprocess welding machine MIG-MAG/FLUX/BRAZING/MMA/TIG DC-Lift controlled by microprocessor.
Particularly designed for bodywork applications, it allows immediate use of three different torches, two traditional MIG torches and one spool gun.
This feature enables direct intervention on different materials without needing to replace the torch and wire spool.
The traditional MIG torches are designed for welding steel, high-strength HLE steels, as well as stainless steel and braze-welding of galvanised sheets; the spool gun torch is specifically designed for aluminium even at a significant distance from the generator.
The SYNERGIC quick adjustment of welding parameters, thanks to ONE TOUCH LCD SYNERGY technology, makes the product very easy to use.
ATC technology, Made in Telwin, makes it easy to achieve excellent welds on thin thicknesses thanks to advanced arc control. It is also possible to intervene manually on arc length: this adjustment allows the shape of the weld bead to be modified according to the welder's style.
The ONE TOUCH LCD graphic display enables better reading of all welding parameters.
Characteristics:
- 17 pre-set synergic curves
- LCD screen display of welding parameters
- 2/4 stroke, spot operation selection
- Thermostatic, overvoltage, undervoltage, overcurrent, motor-generator protections (+/- 15%).
Supplied with:
1x Cable with earth clamp (3 metres) 16 mm² - 10/25 connectors
1x MIG torch MB15 STEEL (3 metres) Euro connector
1x MIG torch MB15 ALU (3 metres) - Euro connector
1x SPOOL GUN torch M6
1x Gas hose
1 Set of 2 drive rolls for steel or stainless wire Ø 0.6 / 0.8 mm (mounted on the machine).
User manual
2-YEAR WARRANTY
In stock
Telwin
Reference: 816060
€2,011.79
€2,235.32
1 662,66 € tax excl.
or 4 x 502,95 €
Free delivery
2-year warranty
Multi-process Synergic Inverter welding machine with an adjustment range of 10 to 240 A enabling the following welding processes:
1) Semi-automatic (welding wire) MIG-MAG, supports the use of steel, stainless steel, aluminium, brazing wire (special for automotive sheet metal) with the appropriate gas, and flux-cored wire for welding steel without gas.
The PULSE process guarantees high execution speed, excellent penetration and cleanliness, as well as welding in all positions.
This process is particularly recommended for welding thin aluminium and stainless steel.
Wire driven by a motor with 4 drive rolls.
The ROOT-MIG process makes it easier to weld sheet metal edge-to-edge, even with wide gaps (also in TIG welding mode).
2) Basic and rutile electrode rods from Ø 1.6 to 6 mm. (electrode holder optional)
3) Lift TIG start for welding steel, stainless steel and ferrous alloys. (TIG torch optional).
The ATC process is highly effective when welding thin materials (0.5 - 0.8 mm), as it reduces metal distortion caused by heat build-up.
The price includes in addition to the machine:
1 MIG/MAG torch 250A with a length of 3 m fitted with a 0.8 mm contact tip.
1 reversible drive roll for steel wire 0.6 / 0.8 mm (mounted on the machine).
1 earth clamp and cable
Supplier stock
Soudexpert
Reference: PACKMMA160A
€120.00
€160.00
99,17 € tax excl.
Free delivery
2-year warranty
Inverter electrode welding machine, MMA
Powerful: 160A
Easy: Automatic adjustment via LCD screen
Versatile: For electrodes from 1.6 to 4mm
Multi-purpose: Easy to use with rutile, basic, stainless steel, cast iron electrodes, etc.
Technologies: Hot start, Arc force, Anti Stick
Welding machine delivered in box with:
1x Cable with ground clamp (1.4 metres) 16 mm² - 16/25 connector
1x Cable with electrode holder (1.6 metres) 16 mm² - 16/25 connector
1x User manual
2-year warranty
This pack contains:
x1 VISION 11 - TRUE COLOR welding mask - ref 202510
x1 Multi-purpose split leather apron - ref GA1048BST
x1 Multi-purpose split leather gloves - ref G100501
x1 Rutile steel electrode - D2.5 - 1kg - ref E6013251
X1 Hammer / brush - 2 rows - Sacit - Ref CAV000081
In stock
Soudexpert
Reference: ET-150-16V
€9.08
€18.15
7,50 € tax excl.
Fast delivery
2-year warranty
Box of 10 Pure Green Tungsten Electrodes WP - PUR
Electrode diameter: Ø 1.6 mm
For aluminium welding with alternating current
No grinding required
Operating range from 40 to 80 Amperes
Maximum operating power: 80 Amperes
In stock
Soudexpert
Reference: E6013401
€7.86
€13.10
6,50 € tax excl.
Fast delivery
2-year warranty
Universal rutile steel electrode E6013
Diameter: 4 mm
Rod length: 400 mm
Box of 1 kg
1 kg equals +/- 21 rods
Arc start from 40V - Direct current. Negative (-) polarity at electrode
Standards: AWS A 5.1: E 6013
Applications:
- Metal construction
- Pipework
- Locksmithing
- Sheet metal work
- Steel framing
In stock
Soudexpert
Reference: 1804085
€39.53
€56.47
32,67 € tax excl.
Fast delivery
2-year warranty
FLUX-CORED STEEL welding wire (gasless) diameter 0.8 mm
Spool Ø 200mm - Weight 5 kg
Excellent arc ignition properties
Use WITHOUT GAS
High arc stability at elevated currents
Good wire corrosion resistance
All-position welding
Applications:
General steel and ironwork applications
Railway construction
Naval construction
Standards:
AWS A5.20: E71T-GS
EN ISO 17632-A: T 42 Z W N 1 H15
Supplier stock
Soudexpert
Reference: PACKMMA180A
€200.66
€250.82
165,83 € tax excl.
or 3 x 66,89 €
Free delivery
2-year warranty
Inverter electrode welding machine, MMA
Power: 180A
Easy: Automatic adjustment via LCD screen
Versatile: For electrodes from 1.6 to 4 mm
Versatile: Easy to use with rutile, basic, stainless steel, cast iron electrodes, etc.
Technologies: Hot start, Arc force, Anti Stick
Welding machine delivered in a box with:
1x Cable with earth clamp (3 metres) 16 mm² – 16/25 connector
1x Cable with electrode holder (3 metres) 16 mm² – 16/25 connector
1x User manual
2-year warranty
This pack contains:
x 1 ELITE XXL TRUE COLOR welder's mask - ref 202514
x 1 Multi-purpose split leather apron - ref GA1048BST
x 1 Multi-purpose split leather gloves - ref G100501
x 1 kg rutile steel electrodes - D2.5 - ref E6013251
x 1 kg rutile steel electrodes - D3.2 - ref E6013321
X 1 Hammer/brush - 2 rows - Sacit - Ref CAV000081
In stock
Soudexpert
Reference: 202515
€84.09
€140.15
69,50 € tax excl.
Fast delivery
2-year warranty
Automatic Panoramic welding helmet
XL viewing area: 100x80mm + Fixed shade 5
Construction: PP
True Color technology
Fixed light shade: DIN3
Variable dark shade: DIN 4/5 - 9/9-13
Solar powered + 2 replaceable CR2450 batteries
Low battery alarm and test button
Number of sensors: 4
Automatically switches from light to dark shade upon arc striking in 0.08 milliseconds
Return to light state from 0.1S to 1S
UV protection: DIN16
Optical class 1/2/1/2
Grinding mode
Weight 550 grams
Applications: MMA 5 to 400 / TIG 2 to 300 / MIG-MAG 5 to 400
Standards: CE / EN 175B / EN 166 / EN 379
In stock
Soudexpert
Reference: ET-150-20B
€14.12
11,67 € tax excl.
Fast delivery
2-year warranty
Box of 10 blue WL20 electrodes - LANTHANUM 2%
Electrode diameter: Ø 2.0 mm
For welding steel, stainless steel and aluminum
Use with alternating and direct current (AC DC)
Operating range from 45 to 110 Amperes
Maximum operating power: DC 110 Amperes and AC 100 Amperes
Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5
In stock
Soudexpert
Reference: 1411061
€8.43
€12.04
6,97 € tax excl.
Fast delivery
2-year warranty
MIG welding wire STEEL SG2 diameter 0.6 mm
Spool Ø 100mm - Weight 1 kg
Excellent arc-starting properties
For welding thicknesses up to 2 mm
Requires shielding gas (Argon CO2 mix)
High arc stability at elevated currents
Good wire corrosion resistance
All-position welding
Polarity DC +
Applications:
General steel and ironwork applications
Railway construction
Shipbuilding
Standards:
AWS 5.18: ER 70S-6
EN ISO 14341-A: G46 4 M21 3Si1 / G 42 3 C1 3Si1
DIN 8559: SG2
This product is Euro Welding's choice
In stock
Gys
Reference: 031425
€321.66
€357.40
265,83 € tax excl.
or 4 x 80,42 €
Free delivery
2-year warranty
Ultra powerful for professionals in workshop and maintenance
High duty cycle: 110A at 60% and 180A at 18%
MMA welding process
Current range: 10 to 180A
Welds steel, cast iron and stainless steel up to 10mm thickness
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, P400
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 72 V
Weight: 5.1kg - 2-year warranty
Delivered in a case with:
1x Cable with ground clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
In stock
Sacit
Reference: F11808S
€6.75
€8.43
5,58 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
In stock
Soudexpert
Reference: 275603
€398.29
€497.87
329,17 € tax excl.
or 4 x 99,57 €
Free delivery
2-year warranty
MIG Welding - WITH AND WITHOUT GAS -
Welds wire Ø 0.8 and 1mm
3 processes: MIG-MAG, MMA and TIG Lift
Uses 1kg (Ø100mm) and 5kg (Ø200mm) spools
Synergy function
LCD screen for very intuitive adjustment
Open circuit voltage: 62V
Power: 50-180A - 6 kVA
Weight (9.5kg)
Single-phase 230 V - 16 A power supply
Compact size and carrying handle
2-year warranty
Dimensions: 49x22x37cm
Delivered with:
1 Electrode holder + 16 mm² cable 3 meters long + 1 Ground clamp + 16 mm² cable 3 meters long
MIG torch 2 meters long, 0.8 and 1.00mm roller
1.5-meter power cable
In stock
Soudexpert
Reference: ET-150-20G
€14.11
€28.23
11,67 € tax excl.
Fast delivery
2-year warranty
Box of 10 Grey WCE20 CERIUM - 2% electrodes
Electrode diameter: Ø 2.0 mm
Very good performance in DC welding
For use on thin sheets and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys
The use at high amperages is not recommended as Cerium oxides will escape, cancelling their benefits.
In stock
Soudexpert
Reference: 1411121
€8.02
€11.46
6,63 € tax excl.
Fast delivery
2-year warranty
MIG Steel SG2 welding wire diameter 1.2 mm
Spool Ø 100mm - Weight 1 kg
Excellent arc ignition properties
For welding thicknesses greater than 6 mm
Requires shielding gas (Argon CO2 mix)
High arc stability at elevated currents
Good corrosion resistance of the wire
All-position welding
DC + polarity
Applications:
General steel and ironwork applications
Railway construction
Shipbuilding
Standards:
AWS 5.18 : ER 70S-6
EN ISO 14341-A : G46 4 M21 3Si1 / G 42 3 C1 3Si1
DIN 8559 : SG2
In stock
Lincoln Electric
Reference: B18268-1P
€471.90
€524.33
390,00 € tax excl.
or 4 x 117,98 €
Free delivery
2-year warranty
Bester S211 generator
Shoulder strap
Sturdy and lightweight case
Wire brush
Chipping hammer
3m cable with electrode holder clamp (16 mm²)
Ground clamp with 3 m cable (16 mm²)
In stock
Lincoln Electric
Reference: K14436-1
€529.37
€588.19
437,50 € tax excl.
or 4 x 132,34 €
Free delivery
2-year warranty
Key features of the Lincoln Sprinter 160-S:
Ideal for intensive work
High duty cycle at 160 A – 45% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm in diameter
Open circuit voltage of 95V!
Multi-process: MMA and TIG Lift welding
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4 kg - Dimensions 162x305x438mm
3-year warranty
Supplied without accessories
In stock
Soudure pro
Reference: VIP
€29.24
24,17 € tax excl.
Fast delivery
2-year warranty
This carrying case allows you to store your welding machine.
Its dimensions:
Length: 44 cm - Width 33 cm - Height 18.6 cm
It is lined with foam to provide additional protection for your welding machine
In stock
TOTAL
Reference: 41825
€89.74
€128.20
74,17 € tax excl.
Fast delivery
2-year warranty
20 V brushless battery-powered hammer drill. Brushless motor. Maximum tightening torque of 55 Nm. Metal and self-locking chuck with capacity up to 13 mm. 22 tightening positions, one drilling position and one hammer position. No-load speed 0-500 / 0-2000 rpm. Impact rate 30,000 bpm. 2 speeds. LED light. Includes 2 x 2Ah batteries, charger and accessories. With carrying case.
In stock
Soudexpert
Reference: 275602
€247.04
€308.80
204,17 € tax excl.
or 3 x 82,35 €
Free delivery
2-year warranty
MIG Welding - WITH AND WITHOUT GAS -
Welds wire Ø 0.8 and 1mm
4 processes: MIG-MAG with and without gas, MMA and TIG Lift
Uses 1kg (Ø100mm) and 5kg (Ø200mm) spools
Synergy function
LCD screen for very intuitive adjustment
Open circuit voltage: 62V
Power: 50-160A - 6 kVA
Weight: (9kg)
Single-phase 230 V - 16 A power supply
Compact size and carrying handle
Dimensions: 49x22x37cm
2-year warranty
Delivered with:
1 Electrode holder + 16 mm² cable 3 meters long + 1 Ground clamp + 16 mm² cable 3 meters long
MIG torch 2 meters long, 0.8 and 1.00mm roller
1.5-meter power cable
In stock
Soudexpert
Reference: ET-150-24B
€19.66
€39.33
16,25 € tax excl.
Fast delivery
2-year warranty
Box of 10 blue WL20 electrodes - LANTHANUM 2%
Electrode diameter: Ø 2.4 mm
For welding steels, stainless steel and aluminum
Use in alternating and direct current (AC DC)
Operating range from 45 to 110 Amperes
Max operating power: DC 110 Amperes and AC 100 Amperes
Classification: AWS A 5.3 - E 4043 DIN 1732 - EL-AlSi5
In stock
Lincoln Electric
Reference: B18267-1P
€398.29
€442.55
329,17 € tax excl.
or 4 x 99,57 €
Free delivery
2-year warranty
Bester S171 generator
Shoulder strap
Sturdy and lightweight case
Wire brush
Chipping hammer
3m cable with electrode holder clamp (16 mm²)
Ground clamp with 3 m cable (16 mm²)
In stock
TOTAL
Reference: 40012
€22.18
€31.69
18,33 € tax excl.
Fast delivery
2-year warranty
20 V fast battery charger. Charging amperage: 4 Ah. Charging time for 2 Ah battery: 1/2 h. Compatible with all TOTAL 20 V batteries.
TOTAL 40012 | Fast charger TFCLI20411E | 20 V
In stock
Soudexpert
Reference: 275601
€89.74
€112.18
74,17 € tax excl.
Fast delivery
2-year warranty
MIG Welding - GASLESS -
Welds steel flux-cored wire Ø 0.8 mm
1kg spool - Spool diameter 100mm
LCD screen for very intuitive adjustment
Open circuit voltage: 56V
Power: 30-120A - 4 kVA
Featherweight (5kg)
Single-phase 230 V - 16 A power supply
Compact size and carrying handle
Dimensions: 40x16x27cm
2-year warranty
Delivered with ground clamp, MIG/MAG torch, electrode holder and accessories kit
In stock
Soudexpert
Reference: ET-150-24G
€17.65
€35.30
14,59 € tax excl.
Fast delivery
2-year warranty
Box of 10 grey WCE20 CERIUM - 2% tungsten electrodes
Electrode diameter: Ø 2.4 mm
Excellent performance in DC welding
Suitable for thin sheet metal and tubes
Ideal for welding steel, stainless steel, nickel and titanium alloys
Use at high amperages is not recommended as the Cerium oxides will dissipate, negating their benefit.
In stock
Telwin
Reference: 816258
€593.91
€659.90
490,83 € tax excl.
or 4 x 148,48 €
Free delivery
2-year warranty
The advantages of the Telwin Technology 238XT CE/MPGE welding unit:
Welds cellulosic 6010 and aluminium electrodes in addition to Rutile, Basic, Stainless Steel, and Cast Iron
Digital display
More power for intensive use (40°C): 200A @35%
Ideal for difficult situations and harsh environments
Designed to withstand impacts: Shock protection and metal handle
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5–200A single-phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Delivered in a carry case
Made in Italy
2-year warranty
This unit is delivered in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m, no plug
In stock
Gys
Reference: 013360
€291.40
240,83 € tax excl.
or 3 x 97,13 €
Free delivery
2-year warranty
Delivered as a pack with:
- 1 GYSMI 160A welder
- 1 Carrying strap
- 1 16 mm² cable kit and 1.6m earth clamp
- 1 16 mm² cable kit and 1.6m electrode holder
- 1 TECHNO 11 TRUE COLOR LCD mask
- 1 Pair of split leather gloves (size 10)
In stock
Soudexpert
Reference: ET-150-24V
€15.63
€31.25
12,92 € tax excl.
Fast delivery
2-year warranty
Box of 10 Pure Green Tungsten Electrodes WP - PUR
Electrode diameter: Ø 2.4 mm
For aluminium welding in alternating current
No sharpening required
Operating range from 70 to 130 Amperes
Maximum operating power: 130 Amperes
In stock
Gys
Reference: 083622
€136.13
€151.25
112,50 € tax excl.
Free delivery
2-year warranty
Ideal for getting started with MMA welding
Duty cycle: 50A at 60% and 35A at 100%
Current range: 10 to 100A
Welds steel, cast iron and stainless steel up to 5mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 2.5 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 63 V
Featherlight: 2kg - 2-year warranty
Supplied with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap
Supplier stock
Lincoln Electric
Reference: K14436-1-P
€961.95
795,00 € tax excl.
or 4 x 240,49 €
Free delivery
2-year warranty
Included: Generator + Shoulder strap + Case + 14 OMNIA 46 electrodes 2.5mm + Welding gloves + 3 m electrode holder (25mm²) + Earth clamp with 3 m cable (25mm²). Stick welding generator. Easy to transport.
In stock
Lincoln Electric
Reference: K14098-1
€1,311.15
€1,380.16
1 083,60 € tax excl.
or 4 x 327,79 €
Free delivery
2-year warranty
This Inverter technology machine Lincoln Speedtec 180C allows you to weld using 2 processes: MMA-MIG-MAG
It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)
It operates on a 16 A or 25 A - 230 V domestic outlet depending on the amperage setting.
Its adjustment range is 20 to 200 A for MIG-MAG welding and 20 to 160 A for MMA welding.
Easy polarity reversal to allow the use of flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.
It features the following devices:
PFC (power factor corrector) It can be used with a 100 m extension cord without any power loss.
The power supply can be provided from a generator.
HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc ignition and penetration.
ARC FORCE adjustable, which maintains constant amperage regardless of arc length.
ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.
Its advantages:
The high duty cycle of this machine guarantees use without premature triggering of the thermal protection system.
This machine is delivered with:
1 power cable 2 m
1 gas hose 2 m
1 ground cable 3 m
1 set of rollers Ø 0.8 and 1 mm for steel welding wire
In stock
Soudexpert
Reference: ET-150-10R
€9.33
€18.66
7,71 € tax excl.
Fast delivery
2-year warranty
Box of 10 Red Tungsten WT20 Electrodes - THORIATED 2%
Electrode diameter: Ø 1.0 mm
For welding steels and stainless steel
Exceptional performance in TIG DC welding
Ideal for precision work
Operating range from 5 to 30 Amperes
Max operating power: DC 50 Amperes
Caution, there is a slight radioactivity risk due to thorium. Therefore we recommend treating grinding dust with a grinder fitted with a particulate filter.
Finally, remember to resharpen when the tip becomes blunt.
In stock
Soudexpert
Reference: 1409107
€98.82
€141.17
81,67 € tax excl.
Fast delivery
2-year warranty
ALU welding wire (AlMg 5) diameter 1.0 mm
Spool Ø 300mm - Weight 7 kg
For welding aluminium
Recommended shielding gas: PURE ARGON
High arc stability at high currents
Good wire corrosion resistance
High cooling rate
All-position welding
DC + polarity
Applications:
Automotive bodywork
Agricultural equipment maintenance
Foundry part repair
Standards:
AWS A 5.10: ER5356
DIM 1732: AlMg5
Supplier stock
Lincoln Electric
Reference: K14437-1-P
€1,082.95
895,00 € tax excl.
or 4 x 270,74 €
Free delivery
2-year warranty
Included: Generator + Shoulder strap + Case + 14 OMNIA 46 electrodes 2.5mm + Welding gloves + 3 m electrode holder (25mm²) + Earth clamp with 3 m cable (25mm²). Stick welding generator. Easy to transport.
In stock
Kemppi
Reference: 61008220
€1,789.80
€2,105.64
1 479,17 € tax excl.
or 4 x 447,45 €
Free delivery
2-year warranty
Adaptive tool for the mobile welder
Excellent welding quality and precise arc striking
High duty cycle: 220A@ 20% - 160A@60% - 120A @ 100%
Uses Ø 100 mm (1 kg) or Ø 200 mm (5 kg) wire spools
Generator compatible
3-metre torch
Lightweight and portable
LCD control panel
IP23 rating for outdoor use
Dimensions: 450x227x368mm - Weight 14.2kg
2-year warranty
Delivered with:
1 torch 3 m long with ergonomic handle, fitted with a contact tip for steel or stainless steel wire Ø 0.8 mm
1 reversible roller for stainless steel or steel wire Ø 0.8/1 mm
1 earth clamp + cable 16mm² cross-section, 2.50 m long
1 gas hose 5 m long
In stock
Gys
Reference: 036635
€277.29
€308.10
229,17 € tax excl.
or 3 x 92,43 €
Free delivery
2-year warranty
Digital interface for better readability of settings
3 welding modes: MMA, MMA pulse and TIG Lift DC
Duty cycle: 160A at 64%
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technology: Hot Start, Arc Force, Antisticking, MMA Pulse, Tig Lift, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 72 V
Weight: 7kg - 2-year warranty
Supplied in a case with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap
In stock
BLUE-MASTER
Reference: JMB2-2
€124.03
€155.04
102,50 € tax excl.
Free delivery
2-year warranty
This set contains 7 taps sized
M3-M4-M5-M6-M8-M10-M12
In stock
Lincoln Electric
Reference: K14439-1
€720.96
€901.20
595,83 € tax excl.
or 4 x 180,24 €
Free delivery
2-year warranty
The Sprinter T is a compact and lightweight welding machine (under 9 kg) delivering 200 A for all electrode types up to 4 mm. Versatile, it offers MMA, HF TIG and pulsed TIG welding, with dual voltage 120/230 V and an intuitive interface, ideal for any maintenance, fabrication or light construction project
In stock
Soudexpert
Reference: ET-150-20R
€14.12
11,67 € tax excl.
Fast delivery
2-year warranty
Box of 10 Red Tungsten WT20 - THORIATED 2% electrodes
Electrode diameter: Ø 2.0 mm
For welding steel and stainless steel
Exceptional performance in TIG DC welding
Ideal for precision work
Usage range from 65 to 220 Amperes
Maximum operating power: DC 220 Amperes
Warning, there is a slight risk of radioactivity due to thorium. Therefore, we recommend treating grinding dust with a grinder equipped with a particle filter.
Finally, remember to resharpen when the tip becomes dull.
In stock
Telwin
Reference: 816039
€801.62
€890.69
662,50 € tax excl.
or 4 x 200,41 €
Free delivery
2-year warranty
Key features of the Telwin Superior 250 Tri welding machine:
High efficiency: 220A @25%
Welds rutile, basic, stainless steel and cast iron electrodes
Compact and lightweight (8.4 kg)
Robust and easy to adjust with potentiometer
Two welding processes: MMA / Lift Contact
Current range: 10 - 250 A
Technologies: Arc Force, Hot Start, Anti Stick
Made in Italy
2-year warranty
Delivered without accessories
In stock
Soudexpert
Reference: ET-150-32R
€27.73
€55.45
22,92 € tax excl.
Fast delivery
2-year warranty
Box of 10 Red WT20 - THORIATED 2% Tungsten electrodes
Electrode diameter: Ø 3.2 mm
For welding steels and stainless steel
Exceptional performance in DC TIG welding
Ideal for precision work
Operating range from 105 to 350 Amperes
Max operating power: DC 350 Amperes
Caution, there is a slight risk of radioactivity due to thorium. Therefore, we recommend handling grinding dust with a grinder equipped with a particle filter.
Finally, remember to re-sharpen when the tip becomes dull.
In stock
Telwin
Reference: 802050
€26.22
€29.14
21,67 € tax excl.
Fast delivery
2-year warranty
For TIG welding (Steel, Stainless steel, Aluminium) and MIG/MAG semi-automatic welding (WIRE) (Aluminium). Specifications: Volume: 950 cc Pressure: 60 bar at 20°C Contents: 60 L max Output valve: M10 Weight: 1120 g Pressure test: PH 165 bar
In stock
Soudexpert
Reference: JWS50
€7.06
€14.12
5,84 € tax excl.
Fast delivery
2-year warranty
Medium welding magnet
High holding force: 22 kg
Secure hold at three different angles: 45 - 90 and 135°
Compact and sturdy, highly versatile
For welding, brazing and pipe installation
Allows precise and efficient welding
In stock
Soudexpert
Reference: JWS75
€9.58
€19.15
7,92 € tax excl.
Fast delivery
2-year warranty
Medium welding magnet
High holding force: 34 kg
Secure hold at three different angles: 45 - 90 and 135°
Compact and robust, highly versatile
For welding, brazing and pipe installation
Allows welding with precision and efficiency
In stock
Telwin
Reference: 816249
€603.99
€862.84
499,16 € tax excl.
or 4 x 151,00 €
Free delivery
2-year warranty
Key features of the Telwin Technology 227XT MV/PFC VRD welder:
Multivoltage: compatible with all voltages (100/120V, 200V, 220/240V)
MV/PFC - maximum performance from a 230V 16A outlet
Welds rutile, basic, stainless steel and cast iron electrodes
Digital display
Higher power output for intensive use (40°C): 200A @30%
Ideal for demanding situations and harsh environments
Designed to withstand impacts: anti-shock protection and metal handle
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 10–200A single-phase (230V)
Technologies: Inverter, PFC, VRD, Arc Force, Hot Start, Anti Stick
Supplied in a carry case
Made in Italy
2-year warranty
This unit is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m, no plug
In stock
Optrel
Reference: 1006.600
€342.84
€428.55
283,34 € tax excl.
or 4 x 85,71 €
Free delivery
2-year warranty
This Optrel VEGAVIEW 2.5 welding helmet features 3 sensitivity sensors with the possibility of angle variation via a slider.
Powered by 2 x 3V CR2032 batteries.
The switching time of this helmet is 0.100ms at ambient temperature and 0.070ms at 55°C.
The EN 379 classification of this model is: 1/1/1/2.
Protection level (adjustable shade): 8-12.
Light shade: 2 in grinding mode for maximum clarity.
Weight: 482 g.
Temperature resistance: Welding helmet 220° and cover lens up to 137°.
Suitable for MMA, MIG/MAG and TIG welding as well as plasma cutting. This helmet also features a grinding mode.
Supplied with:
1 headband adjustable in width and length.
Storage bag.
2 x CR2032 batteries.
1 spare outer cover lens.
Warranty card.
2-year warranty with 1 additional year (excluding the battery) if the product is registered within the first 6 months after purchase on www.optrel.com.
In stock
Trafimet
Reference: lot 010341
€11.26
€12.51
9,31 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
In stock
Soudexpert
Reference: JWS100
€12.60
€25.20
10,42 € tax excl.
Fast delivery
2-year warranty
Medium welding magnet
High holding force: 44kg
Secure hold at three different angles: 45 - 90 and 135°
Compact and robust, very versatile
For welding, brazing and pipe installation
Allows welding with precision and efficiency
In stock
Lincoln Electric
Reference: B18264-1
€680.63
€972.33
562,51 € tax excl.
or 4 x 170,16 €
Free delivery
2-year warranty
This BesterMIG 200-S Multi multi-process machine allows MMA - MIG-MAG - TIG welding
Its digital display makes it easy to read the setting information
It accepts wire spools of diameter 100 and 200 mm.
Its low weight makes it an easy ally when transporting on site. It can also be powered by a generator.
No longer worry about choosing the welding current, wire speed or material thickness. The Synergic system does it for you while guaranteeing perfect welds.
The Synergic system limits the risk of weld defects and ensures excellent quality at reduced costs.
Weld with complete peace of mind: automatic parameter adjustment saves welding time and increases your productivity
Easy polarity change for welding with flux-cored wire (gasless).
It features the following functions:
Arc-Force
Hot-Start
Anti-Stick
It is supplied with:
1 MIG-MAG torch length 3 m equipped with a contact tip for steel or stainless steel wire Ø 0.8 mm.
1 Earth clamp + Cable cross-section 16 mm² length 3 m
1 Electrode holder + cable length 3 m
1 Power supply cable length 3 m
1 Reversible drive roll for steel or stainless steel wire Ø 0.8 / 1 mm fitted on the machine
1 Reversible drive roll for steel or stainless steel wire Ø 0.6 / 8 mm
1 Shielding gas hose for refillable cylinder length 2 m
In stock
Weldline
Reference: W000403824
€121.00
€151.25
100,00 € tax excl.
Free delivery
2-year warranty
This auto-darkening welding helmet features 2 sensors.
Solar power + 2 AAA batteries
Viewing area: 98 x 40 mm. Wrap-around shape for optimal head protection.
Switching time light/dark: 1/25000 sec
Return to light state adjustable from 0.1 to 1 second.
Adjustable shade from 9 to 13 for welding.
Grinding mode via internal button.
the "LS" technology applied to the lens of this welding helmet, in addition to its role of protecting against harmful rays, helps increase the penetration rate.
In clear mode, the lens lets more color through to the welder's eye, allowing a more precise rendering of detail by reducing the eye's adaptation effort.
The welder will be more precise in their movements and less fatigued during welding operations.
18-month warranty.
Optical class 1/1/1/2
Weight 475 g
Delivered with:
2 outer protective lenses
1 inner protective lens
1 sweatband
1 comfort cushion on headband.
In stock
Gys
Reference: 060258
€29.24
€32.49
24,17 € tax excl.
Fast delivery
2-year warranty
Capacity 7 kg
For electrodes up to 45 cm
Maximum electrode temperature 105°C
Dimensions: 500 x 120 x 110 mm - 430g
In stock
Soudexpert
Reference: 202516-PAPR
€478.96
€598.70
395,83 € tax excl.
or 4 x 119,74 €
Free delivery
2-year warranty
Welding helmet with powered air-purifying respiratory protection Protects eyes from IR/UV and the operator's respiratory tract Optimum field of view 75x112mm True-Color Technology - Optical class 1/1/1/1 Lithium battery life of approximately 8 hours - Charging time 1h 3 adjustable airflow rates to suit requirements (from 170 l/min to 230 l/min) 4 solar sensors for very high sensitivity and ultra-fast reaction time (0.08 ms) Fixed light shade: DIN 3 Variable dark shade DIN 9/12-13/15 Digital controls Grinding mode The filter is rated TH3 and retains 99.996% of welding particles Standards EN 166 / EN 175 / EN 379 / EN 12941 Supplied with respiratory protection system, lithium battery, EU charger, harness, flow meter Weight 5 kg
In stock
Soudexpert
Reference: PE-200IT
€4.99
€9.98
4,13 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder 200 Amperes
For electrodes Ø 1.6 to 3.2 mm
Fully insulated head and handle
2 electrode positions: 90° for flat welding and 45° for positional work
Maximum cable cross-section: 25 mm²
Cable secured by hexagonal nuts
Current capacity: 200 A
Duty cycle: 200 A at 35% and 150 A at 60%
Compliant with standard EN-60-974-11
In stock
Gys
Reference: 029972
€206.71
€229.68
170,84 € tax excl.
or 3 x 68,90 €
Free delivery
2-year warranty
Ideal for hobbyists or professionals
Duty cycle: 45A at 60% and 40A at 100%
Current range: 10 to 130A
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic stick electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Featherlight: 2.9kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap
In stock
Soudexpert
Reference: PE-300IT
€9.53
€19.06
7,88 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder 300 Amperes
For electrodes Ø 1.6 to 5 mm
Fully insulated head and handle
2 electrode positions: 90° for flat welding and 45° for positional work
Maximum cable section: 50 mm²
Cable clamped by hexagonal nuts
Current capacity: 300 A
Duty cycle: 300 A at 35% and 250 A at 60%
Compliant with standard EN-60-974-11
In stock
Kemppi
Reference: 6102150
€700.79
€875.99
579,17 € tax excl.
or 4 x 175,20 €
Free delivery
2-year warranty
Key features of the Kemppi Minarc Evo 150:
The little giant of MMA welding by Kemppi
Excellent welding and arc-striking quality
Automatic dynamic function
Compatible with long power cables
High duty cycle: 140A@35%
Lightweight and portable - 4kg
Generator compatible
Made in Finland
2-year warranty
This unit is delivered with:
1 electrode holder + cable (length 3m, cross-section 16 mm²)
1 earth clamp + cable (length 2m, cross-section 16 mm²)
1 power cable with plug, length 3m with Schuko plug
In stock
LEOPARD
Reference: F12136
€11.09
€15.84
9,16 € tax excl.
Fast delivery
2-year warranty
Brown grain leather balaclava, lined with an inner anti-perspiration fabric.
Kevlar thread stitching for better resistance.
Fitted with a velcro tab for closure
In stock
Soudexpert
Reference: PE-500IT
€14.62
€29.25
12,09 € tax excl.
Fast delivery
2-year warranty
Lever electrode holder 500 Amperes
For electrodes Ø 2 to 8 mm
Head and handle fully insulated
2 electrode positions: 90° for flat welding and 45° for positional work
Maximum cable cross-section: 95 mm²
Cable secured by hexagonal nuts
Current capacity: 500 A
Duty cycle: 500 A at 35% and 400 A at 60%
Compliant with standard EN-60-974-11
In stock
ESAB
Reference: 0700301092
€1,506.45
€1,673.83
1 245,00 € tax excl.
or 4 x 376,61 €
Free delivery
2-year warranty
The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use
Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication
Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.
In stock
STANZANI
Reference: 010991
€7.05
5,83 € tax excl.
Fast delivery
2-year warranty
Pack of 10 notched washers for DECA dent puller
| Combinations | Price | |
| €7.05 | ||
| €24.20 | ||
In stock
Soudexpert
Reference: 33005
€12.60
€25.20
10,42 € tax excl.
Fast delivery
2-year warranty
Screw electrode holder 300 Amperes
Right-hand thread
For electrodes Ø 1.6 to 3.2 mm
Rotating handle for secure grip
Head and handle fully insulated
2 electrode positions: 90° for flat welding and 45° for positional work
Current capacity: 300 A
Duty cycle: 35% at 300 A and 60% at 250 A
In stock
BLS France
Reference: 8006307
€9.58
7,92 € tax excl.
Fast delivery
2-year warranty
Protective mask against welding fumes and odors.
Compared to the other mask available on our site, this mask features an activated carbon filter to contain odors, hence the black color of the valve.
It fits easily under your welding helmet and adapts to the shape of your face thanks to its adjustable strap.
This mask offers high respiratory protection of the FFP3 type; it features a surface micro-mesh that prevents clogging of the filter material and liquid absorption, extending its service life.
On its inner face, it features a full facial seal to fit correctly against your face and ensure better protection.
This disposable mask, for personal use, can be used multiple times depending on the duration of your welding operations and the environment in which they are carried out.
It is ideal for occasional welders who want to protect themselves from welding fumes without making a significant financial investment.
For professional or heavy use, however, you should opt for another type of protection such as a powered air-purifying respirator helmet or a fume extractor.
In stock
Telwin
Reference: 816232
€1,018.58
€1,095.24
841,83 € tax excl.
or 4 x 254,65 €
Free delivery
2-year warranty
This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.
MMA (electrode) and TIG welding solutions are available as options.
As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.
This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).
Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.
With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.
Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)
MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.
Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.
This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option.
Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder
TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...
As an option:
It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.
Reference KIT000514
It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.
For connecting the unit to gas, it is recommended to use the 804208 fitting.
In stock
TOTAL
Reference: 41827
€99.83
€124.79
82,50 € tax excl.
Fast delivery
2-year warranty
2-in-1 brushless impact wrench with 20 V battery. Brushless motor. 1/2'' insert. Integrated 1/4'' hex insert. No-load speed 0-2000 / 0-2400 / 0-2600 rpm. Impact rate 0-2100 / 0-2500 / 0-2900 bpm. Tightening torque 230 Nm. LED work light. Accessories included. With 2 x 2 Ah batteries and charger. With carrying case.
The TIWLI20236E impact wrench runs on a 20 V battery with a brushless motor for better efficiency. It features a dual drive: 1/2'' square and 1/4'' hex. Three speeds (0-2000 / 0-2400 / 0-2600 rpm) and up to 2900 bpm. Max torque of 230 Nm. Supplied with LED, 2 x 2 Ah batteries, charger, accessories and carrying case.
In stock
Peugeot Outillage
Reference: 801240
€142.57
117,83 € tax excl.
Free delivery
2-year warranty
Metal cutting disc Ø 350 mm.
Bore 25.4 mm - Thickness 2.8 mm
| Combinations | Price | |
| €142.57 | ||
| €45.57 | ||
In stock
Femi
Reference: Etau
€38.32
31,67 € tax excl.
Fast delivery
2-year warranty
Vise for Femi column drill press
2 vises are available depending on your drill press model
100 mm vise reference DP12-901 suitable for FEMI drill presses:
DP12-921 - DP12-961 - DP1212-943 -DP12 -941
135 mm vise reference DP12 -902 suitable for drill presses
DP961 - DP12-943
| Combinations | Price | |
| €38.32 | ||
| €47.40 | ||
In stock
TOTAL
Reference: 41726
€69.58
€86.97
57,50 € tax excl.
Fast delivery
2-year warranty
20 V cordless impact wrench. Brushless motor. 1/2'' insert. Maximum tightening torque 400 Nm. Loosening torque 550 Nm. 20 V No-load speed 0–1600 / 0–1900 / 0–2300 rpm. Impacts 0–2100 / 0–2500 / 0–2900 bpm. LED light. With 3 sockets (17, 19, 21 mm).
In stock
Klingspor
Reference: BPS600W
€5.75
4,75 € tax excl.
Fast delivery
2-year warranty
For precision treatment and removal of light burrs inside pipes and bores - Very suitable for the treatment and cleaning of moulds and die-cast parts - Very flexible and adaptable tool
Application: steel or stainless steel depending on the brush chosen
Diameter: 25 mm
Length: 75 mm
Shank diameter: 6 mm
Wire length: 25 mm
Wire thickness: 0.3 mm
Maximum admissible rotation speed 18,000 rpm
| Combinations | Price | |
| €5.75 | ||
| €8.68 | ||
This product is Euro Welding's choice
In stock
TOTAL
Reference: 41848
€235.95
€294.94
195,00 € tax excl.
or 3 x 78,65 €
Free delivery
2-year warranty
20 V brushless impact wrench and battery-powered LED floodlight set. 20 V battery-powered brushless impact wrench. Brushless motor. 1/2'' drive. 850 Nm tightening torque. 1,000 Nm loosening torque. 3 screwdriving positions. RPM 0–1600 / 0–2100 / 0–2400. Impacts 0–1500 / 0–1800 / 0–2200. LED light. 2,000 lumens ±10% LED floodlight. 24 W LED output. 120° rotating head. With 1 set of 10 CR-V impact sockets: 10, 12, 13, 14, 15, 17, 19, 21, 22 and 24 mm. 2 x 5 Ah batteries and charger.
In stock
Klingspor
Reference: BPS600Z
€12.40
10,25 € tax excl.
Fast delivery
2-year warranty
Advantage of this type of brush: The tool diameter changes according to speed - Perfectly suited for treating interior surfaces of pipes or bores - High brushing capacity thanks to twisted wire
Application: steel or stainless steel depending on the brush chosen
Diameter: 22 mm
Length: 70 mm
Shank diameter: 6 mm
Wire length: 25 mm
Number of strands: 8
Wire thickness: 0.35 mm
Admissible rotation speed: 20,000 rpm
| Combinations | Price | |
| €12.40 | ||
| €15.13 | ||
In stock
Telwin
Reference: 816056
€1,289.65
1 065,83 € tax excl.
or 4 x 322,41 €
Free delivery
2-year warranty
The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.
It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences
One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.
ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding
Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m
For connecting the machine to gas, it is recommended to use fitting 804208.
In stock
TOTAL
Reference: 40007
€45.38
€56.72
37,50 € tax excl.
Fast delivery
2-year warranty
20 V - 4 Ah lithium battery. With battery level indicator. Compatible with all TOTAL 20 V cordless tools.
In stock
Telwin
Reference: 816076
€1,900.86
€2,112.07
1 570,99 € tax excl.
or 4 x 475,22 €
Free delivery
2-year warranty
Multi-process machine allowing MMA - MIG - TIG welding.
Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m
In stock
Gys
Reference: 065109
€1,265.45
€1,406.06
1 045,83 € tax excl.
or 4 x 316,36 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating
Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls
TIG torch optional
In stock
Gys
Reference: 078727
€791.54
€879.49
654,17 € tax excl.
or 4 x 197,89 €
Free delivery
2-year warranty
Multi-process welding machine for professionals
Welds steel, stainless steel and aluminum up to 3mm thick
MIG duty cycle: 110A@ 60%-40°C
MMA duty cycle: 100A@ 60%-40°C
Current range: 20 to 150A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.6 to 0.9 mm)
- MMA (electrode Ø 1.6 to 3.2 mm) with Anti-Sticking function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable MAG torch 150A 3m
Digital interface with very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 53 x 28 x 45 cm - 16.5 kg
Delivered with:
1x 150A 3m torch
1x 2m 16mm² earth clamp
1x 2m 16mm² electrode holder
1 gas hose 1m + 2 hose clamps
1 contact tip wrench
1 contact tip 0.9 + nozzle for gasless wire
In stock
Gys
Reference: 065116
€1,502.42
€1,669.35
1 241,67 € tax excl.
or 4 x 375,61 €
Free delivery
2-year warranty
Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Gas cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 41 x 72 x 77 cm - 27kg
IP21 rating
Supplied with:
1 x 250 A torch 3m MB25
1 x 200 A earth clamp 2.5 m
1 x MMA electrode holder 2 m
2x 0.8 / 1.0 drive rolls
TIG torch optional
In stock
Kemppi
Reference: Kemppi Minarc 223 AC/DC Tig
€3,623.95
€3,814.68
2 995,00 € tax excl.
or 4 x 905,99 €
Free delivery
2-year warranty
Welding and pickling with a single TIG machine
The Minarc T223 AC/DC is a brand new single-phase 220 A TIG AC/DC welding unit with an integrated electrolytic weld pickling process.
The Minarc T223 AC/DC includes standard and pulsed welding functions as well as memory channels and remote control options.
The adjustment controls are easy to use and the large, clear colour screen features a protective cover against impacts.
The new MAX Weldclean process is simple and quick to use.
Converting the TIG torch to pickling mode takes only a few moments. Your welds are clean, ready and perfect faster.
You weld, clean the welds with a low current and a cleaning solution, then neutralise with water.
The unit comes with:
- a TX225G torch with a length of 4 m
- A ground clamp + cable
In stock
Gys
Reference: 066595
€1,003.30
€1,114.77
829,17 € tax excl.
or 4 x 250,83 €
Free delivery
2-year warranty
Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)
Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose
Supplier stock
Kemppi
Reference: MIM223GM
€1,864.40
€2,071.56
1 540,83 € tax excl.
or 4 x 466,10 €
Free delivery
2-year warranty
KEMPPI - MINAR MIG M 223 with integrated 3M torch
In stock
Gys
Reference: 052222
€1,027.49
849,21 € tax excl.
or 4 x 256,87 €
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 400 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
Supplier stock
Kemppi
Reference: MIM223PGM
€2,203.21
€2,448.01
1 820,84 € tax excl.
or 4 x 550,80 €
Free delivery
2-year warranty
KEMPPI - MINAR MIG M 223 pulse with 3M torch and European connector.
In stock
Gys
Reference: 056923
€398.29
€497.87
329,17 € tax excl.
or 4 x 99,57 €
Free delivery
2-year warranty
The Hand-Duction is designed to heat, loosen and easily remove all mechanical parts in a matter of seconds: seized bolts/nuts, screws...etc. It is particularly recommended in the automotive, agricultural, industrial and construction industry sectors
An ergonomic tool
Lightweight, it weighs only 2.54 kg
Its pistol shape provides an excellent grip
Equipped with an LED at its tip, it illuminates the area to be heated
Easy to use, simply plug it in and use it
With a power of 1000 W, the Hand-Duction also features an air cooling circuit. ... WHICH OFFERS A CONSIDERABLE TIME SAVING
A considerable time saving
Immediate flameless heating on a precise area, allowing work close to cables, pipes, or any heat-sensitive part without removing them
Supplied with three inductors, it can be adapted to all kinds of parts. Changing the inductor is very simple via a locking/unlocking system at the end of the product
In stock
Gys
Reference: 086548
€21.78
€27.23
18,00 € tax excl.
Fast delivery
2-year warranty
Filler metal for welding aluminium-magnesium alloys.
Classification:
AWS A5.10: ER5356
EN ISO 18273: S Al 5356 AlMg5Cr(A)
DIN 1732: SG AlMg 5
Applications:
Shipbuilding, railway, tipper and trailer construction.
In stock
AEG Powertools
Reference: 4935412266
€221.21
€245.79
182,82 € tax excl.
or 3 x 73,74 €
Free delivery
2-year warranty
. 1200 W motor
. Electronic speed controller to adapt speed to materials
. Torque and speed optimised for polishing work
. Auto-stop carbon brushes, easily accessible
. "Full-hand" trigger
. Spindle lock
. Ergonomic design with two-handed grip for intensive work
. Supplied with a side handle, 4m cable, sanding pad and gearbox protection kit
In stock
Soudexpert
Reference: TR-01
€89.74
€99.72
74,17 € tax excl.
Fast delivery
2-year warranty
This cart is the ideal way to move your welding machine or your bodywork dent puller
It is a 2-in-1 cart: welding machine + gas cylinder on the same stand
Assembled dimensions: 840 X 385 X H 700 mm
Useful dimensions of the upper tray: 45 x 28 cm
Cart sold bare. Delivered unassembled.
In stock
Trafimet
Reference: CV0024
€28.24
€31.38
23,34 € tax excl.
Fast delivery
2-year warranty
Cutting guide carriage for plasma cutter torch
Compatible with TRAFIMET torches;
References:
Ergocut S 25K / S 35K / S 25
Ergocut S45
In stock
Gys
Reference: 045415
€961.95
€1,202.44
795,00 € tax excl.
or 4 x 240,49 €
Free delivery
2-year warranty
The quality of a TIG weld depends on the proper sharpening of the tungsten electrode. The WAG 40 is the portable solution for optimal preparation.
This sharpener allows:
Sharpening of 6 electrode diameters (Ø 1 to 4 mm).
Angle adjustment for all situations: angular adjustment from 15 to 180°.
It features an integrated grinding particle filter to protect the operator from dust.
Included upon delivery:
Adapter for electrode Ø 1.6, 2.4 and 3.2 mm.
1 dust filter
1 diamond disc Ø 40
In stock
Gys
Reference: 080768
€1,406.77
€1,758.46
1 162,64 € tax excl.
or 4 x 351,69 €
Free delivery
2-year warranty
Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.
Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting
Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.
Ideal for travel and construction sites
Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.
Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes
In stock
Gys
Reference: 062054
€755.40
€839.33
624,32 € tax excl.
or 4 x 188,85 €
Free delivery
2-year warranty
Ultra-compact and designed for craftsmen, the PROTIG 161 DC HF (160 A) delivers high-quality welds on mild and stainless steels thanks to its advanced secondary regulation. Its intuitive interface makes parameter adjustment straightforward.
OPTIMISED DC WELDING
Secondary regulation: ensures optimal arc stability and constant current in all positions.
TG DC: ensures quality welding on all ferrous materials such as steel, stainless steel, but also copper and its alloys…
TIG DC Pulsed: controls the temperature of the weld pool, limits distortion and thus allows the joining of thin sheets from 0.3 mm.
SPOT: fast and precise tacking before welding thin sheets.
2 ignition types: HF non-contact or LIFT contact for electrosensitive environments.
3 trigger modes: 2T, 4T and 4T LOG.
Automatic torch detection: compatible with blade and double-button torches
MMA WELDING
MMA: Basic and Rutile electrodes (up to Ø 4 mm)
Pulsed MMA: facilitates upward vertical position welding (pipes/pipeline…)
3 integrated welding aids:
- Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable in seconds depending on the metal type
- Arc Force: temporary current increase in difficult welding situations.
INTUITIVE
Current and voltage display during and after welding (WPS/WPQR).
Memorisation of 10 programs per process for perfect reproducibility of your welds.
Intelligent fan management to reduce power consumption, dust intake and machine noise.
→ Supplied with:
1 TIG torch SR17 DB - 4 m, + accessories *
1 electrode holder and earth clamp with 25 mm² section cable, length 2 m.
* 1 electrode holder Ø 1.6 and 2.4 mm
1 diffuser for electrode Ø 1.6 and 2.4 mm
1 ceramic nozzle GR7 and GR5
1 long cap and 1 short cap
In stock
Gys
Reference: 033184
€801.63
€1,002.04
662,50 € tax excl.
or 4 x 200,41 €
Free delivery
2-year warranty
Welding machine with electric transformer
Ideal for craftsmen
Designed to weld steel, stainless steel and aluminium in non-intensive use
Setting assistance thanks to the SMART panel
Duty cycle: 140A at 15%
Current range: 35 to 180A
Combines 2 processes:
- MIG/MAG for workshop welding wire Ø 0.6 to 1 mm
- NO GAS for outdoor welding flux-cored wire Ø 0.9 and 1.2 mm
2-roller wire feeder for spool Ø200mm (5kg) and Ø300mm (15kg)
Removable EURO torch 250A 3m (1.0mm contact tip)
Powerful 40W motor to ensure constant wire feeding
Can accept 4m³ gas cylinders
Single-phase power supply 230 V - 16 A
Compatible with 6kva generator
Dimensions: 39 x 80 x 70 cm - 48kg
Delivered with:
- 1 earth clamp 3 metres (cable 1.6 m /16 mm2)
- 1x Disconnectable torch 150A 3 metres
- 1x Gas hose + 2 clamps
Not included: accessory kit for MB15 torch - ref: 041226
In stock
Telwin
Reference: 816236
€341.83
€427.29
282,50 € tax excl.
or 4 x 85,46 €
Free delivery
2-year warranty
Key features of the Telwin 211/S welding machine:
Welding current display
Robust and elevated protection against dust, water and dirt
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
High duty cycle (20°C): 180A @95%
Compact and powerful: 10-180A single-phase (230V)
Two welding processes: MMA / Lift TIG
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Easy to transport thanks to its carry case
Made in Italy
2-year warranty
This machine is supplied in a carry case and includes:
1 electrode holder + cable (length 180 cm, cross-section 25 mm²)
1 ground clamp + cable (length 180 cm, cross-section 25 mm²)
1 power supply cable with plug, length 2 m
In stock
Telwin
Reference: 816208
€1,854.48
€2,060.53
1 532,66 € tax excl.
or 4 x 463,62 €
Free delivery
2-year warranty
This machine allows welding with tungsten electrodes (TIG welding) steel, stainless steel, copper, nickel ...including aluminium .
It also allows welding with rutile or basic electrodes (MMA welding kit optional).
It features the following functions:
TIG LIFT: Facilitates electrode striking.
TIG HF High frequency CONTACTLESS ignition
TIG 2T/4T (manual or automatic welding)
TIG SPOT allows tacking of parts before welding.
HOT START adjustable: additional starting power for electrodes that are difficult to strike.
SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.
ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.
ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,
TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS
( automatically adjusted by the microprocessor according to the current intensity and the welding duration.
VRD: Improves safety during welding operations in damp environments
It also features the PULSE function particularly suited for welding thin plates where low heat input to the workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision improves as well.
It also features the EASY PULSE system allowing immediate pulsed mode welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment
THINSPOT function, enabling fast and precise spot welding.
For gas connection of the machine, it is recommended to use fitting 804208.
In stock
Gys
Reference: 060692B
€99.83
€124.79
82,50 € tax excl.
Fast delivery
2-year warranty
Keeps electrodes at the ideal temperature of 120°C
Electrode capacity 450mm: 5kg
Power supply: 230V
Power: 238 W
Lightweight at 3.2kg
Storage temperature: 50 - 200°C
Dimensions: 610x188x168mm
Supplier stock
Gys
Reference: 063945
€1,802.90
€2,003.23
1 490,00 € tax excl.
or 4 x 450,73 €
Free delivery
2-year warranty
The PROTIG 201 AC/DC is the professional TIG welding solution for joining all types of materials up to 4 mm thick (steel, stainless steel, aluminium, copper or titanium).
It offers very high precision across many fields such as craftsmanship, maintenance or pipework.
Equipped with a water cooling unit, it allows the use of more ergonomic TIG torches.
6 TIG AC/DC welding processes
TIG DC: Ensures quality welding on all ferrous materials such as steel, stainless steel, but also copper and its alloys, titanium…
Pulsed TIG DC: Controls the temperature of the weld pool, limits distortion and thus allows the joining of thin sheets from 0.3 mm.
TIG DC Spot: Pre-assembles ferrous metal parts by tacking
TIG AC Easy: Simplifies the use of the welding unit through predefined parameters. The user only selects the diameter of their tungsten electrode on the interface
TIG AC Standard: Dedicated to welding aluminium and its alloys (Al, AlSi, AlMg, AlMn…). The alternating current ensures prior cleaning of the aluminium for a quality weld.
TIG AC Spot: Pre-assembles aluminium parts by tacking.
2 coated electrode welding modes
Standard MMA: Accepts basic and rutile electrodes up to Ø 4 mm
Pulsed MMA: Facilitates welding in the upward vertical position (pipes/pipeline...).
User assistance for the welder
2 ignition types: HF non-contact or LIFT for electrosensitive environments
3 trigger modes: - 2T: maintain pressure on the trigger throughout the weld.
- 4T: to start welding, hold the trigger once then press again to stop welding.
- 4T «LOG»: the operator can switch between 2 welding currents at any time with a brief trigger pulse (hot current and cold current)
MMA welding aids: - Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable depending on the metal type
- Adjustable Arc Force: regulates arc length variations
VRD (voltage reduction device): welding current is only delivered when the electrode is in contact with the workpiece (not activated by default).
• Memorisation of up to 50 programs per process
• Connectivity for remote controls (foot pedal, manual remote control)
• Current/voltage display after welding (verification of WPS/WPQR compliance)
• Reinforced casing with anti-shock pads
Unit supplied with:
1 double-button torch SR26, length 4 m
1 earth clamp + cable, length 2 m
1 electrode holder
1 accessory kit
In stock
DECA
Reference: DEST010339
€1.21
€2.02
1,00 € tax excl.
Fast delivery
2-year warranty
Filter lens
In stock
Telwin
Reference: 816057
€1,053.84
€1,317.30
870,97 € tax excl.
or 4 x 263,46 €
Free delivery
2-year warranty
This tri-process machine allows you to weld in MMA, semi-automatic (MIG-MAG) and TIG mode with a single unit.
MMA (electrode) and TIG welding solutions are available as options.
As standard, this semi-automatic machine has 17 programmed positions. The user simply selects the type of metal and the wire Ø. It is also possible to weld in manual mode by directly adjusting the setting parameters.
This welding machine uses spool wire for welding. This welding process allows welding of thin materials (0.6 mm).
Very practical on thin sheet metal (automotive body panels, chassis...), it avoids the weld bead restart that occurs when changing an electrode.
With the addition of a shielding gas, this machine allows welding of aluminium, stainless steel and steel in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.
Using a suitable CU Si3 type wire, it enables welding of HSS, EHS, UHS steels (automotive body panels)
MIG welding under gas shielding requires the use of pure Argon gas for welding aluminium or an Argon + CO² mixture for steel and stainless steel.
Special case: For steel, it is possible not to use gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of the steel sheets must not be less than 1 mm without risk of burn-through.
This machine uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). Optionally, an adapter for Ø 100 mm spools is available.
Upon delivery this machine includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless wire Ø 0.6 and 0.8 mm.
1 steel/stainless contact tip Ø 0.8 mm
1 gas hose for refillable cylinder length 1 m
TIG welding under gas shielding requires the use of pure Argon gas for welding steel, stainless steel, ferrous alloys and copper....
Optional:
It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes of Ø 1.6 mm to 4 mm.
Reference KIT000514
It is possible to add a TIG torch with a length of 4 m in order to weld in TIG mode using pure Argon shielding gas.
In stock
Reference: DEST049468
€9.08
€18.15
7,50 € tax excl.
Fast delivery
2-year warranty
5 carbon electrodes sheet metal heating Ø 10 mm Length 300 mm. Weight 200 grams (set of 5).
In stock
Gys
Reference: 013629
€1,406.78
€1,563.09
1 162,66 € tax excl.
or 4 x 351,70 €
Free delivery
2-year warranty
The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 20* mm thickness on a wide range of materials. Designed to operate in harsh environments, it features a very robust mechanism and an intuitive control panel.
• Cuts steels (mild, stainless, hardened, HSLA), aluminum, copper…
• 3 working modes:
- Cutting on solid sheets
- Cutting on grid supports
- Trigger lock
• HF-free ignition that avoids interference which could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.
Supplied with a TPT 40 torch for cutting only, with a length of 4 m.
* Clean cut is 15 mm, separation cut 20 mm and piercing 8 mm when this cutter is equipped with a TPT 40 torch
In stock
Reference: DEST792804
€1.36
€2.72
1,13 € tax excl.
Fast delivery
2-year warranty
Box of 96 rivets
In stock
Telwin
Reference: 816220
€590.02
€737.52
487,64 € tax excl.
or 4 x 147,51 €
Free delivery
2-year warranty
This inverter technology unit makes electrode welding easier thanks to direct current and its low power consumption
(230V-16A power supply).
It has an adjustment range of 10 to 170 A.
The digital amperage display allows you to be more precise in your work.
TIG welding allows you to weld thin thicknesses that you could not achieve with an electrode in MMA mode.
Welding possible on steel, stainless steel, copper, nickel... from 0.5 mm thickness.
TIG welding mode requires the use of a shielding gas during the welding operation (pure Argon).
Arc striking is achieved by touching the tip of the tungsten electrode to the metal workpiece and lifting it slightly to create the welding arc (TIG-LIFT striking method).
It features protection (+/- 15% variation) against electrical overloads, allowing it to be powered by a generator. However, the generator must supply a stabilized current.
Equipped with the following systems:
HOT START to facilitate arc striking, ANTI-STICKING which eliminates the problem of the electrode sticking to the workpiece, and ARC FORCE which increases the arc power when the welding arc is kept short.
VRD: This device reduces the voltage when the welding unit is switched on but not in welding mode; it thus ensures the welder's safety should they accidentally touch the electrode.
Supplied in a carry case with:
1 TIG torch 110 A with valve, gas opening valve on the torch; length 4 m.
This torch is fitted with a ceramic nozzle and a tungsten electrode Ø 1.6 mm.
1 flow meter for refillable gas cylinder.
1 MMA electrode holder allowing the use of rutile or basic electrode rods from Ø 1.6 to 4 mm, cable length 3 m.
1 earth clamp + cable length 3 m.
In stock
Reference: DEST3239936
€2.42
€4.03
2,00 € tax excl.
Fast delivery
2-year warranty
Sanding belt 100x1000 mm grit 60
In stock
Telwin
Reference: 804059
€151.20
€189.00
124,96 € tax excl.
or 3 x 50,40 €
Free delivery
2-year warranty
This compass kit delivered in a case is suitable for the torches on the following plasma cutters:
Superior plasma 70
Superior plasma 100
Superior plasma 160
In stock
Telwin
Reference: 816148
€1,204.96
€1,338.84
995,83 € tax excl.
or 4 x 301,24 €
Free delivery
2-year warranty
This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device
The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.
This cutter is equipped with a warning indicator light for consumable replacement
Supplied with a 4 m torch + ground clamp and 3 m cable
In stock
Reference: DESTBester6013
€6.05
€12.10
5,00 € tax excl.
Fast delivery
2-year warranty
Bester 6013 Electrodes (20 pcs)
In stock
Gys
Reference: 065543
€625.17
€694.64
516,67 € tax excl.
or 4 x 156,29 €
Free delivery
2-year warranty
The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.
Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.
Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.
In stock
Lincoln Electric
Reference: K12038-3
€1,810.09
€2,262.62
1 495,97 € tax excl.
or 4 x 452,52 €
Free delivery
2-year warranty
The Tomahawk 30 K plasma cutter is the most flexible plasma cutting machine on the market. The machines are delivered ready to use, capable of cutting quickly and precisely.
Powered by single-phase 230V, ideal for on-site work. With this cutter, plasma cutting will no longer be a problem — forget grinding, simply take the torch and cut in just a few seconds.
Output current range 15 - 30 A
Duty cycle 30A@60% - 25A@100%
Example of possible cutting thickness for steel:
Recommended cutting thickness: 12 mm
Clean cutting thickness: 16 mm maximum
Separation cutting thickness: 20 mm maximum
thanks to a button on the front of the unit, it can be connected to a compressor.
Delivered with
One LC 30 manual torch, length 4 m - EURO connector
Cable and ground clamp
In stock
Soudexpert
Reference: 202510
€25.21
€29.66
20,83 € tax excl.
Fast delivery
2-year warranty
Automatic Vision 11 TC welding helmet True-Color technology Matte black colour, easy to clean Fixed light shade: DIN 3 Fixed dark shade: DIN 11 Wide field of view: 90x35mm Solar power + Lithium battery Number of sensors: 2 Automatically switches from light to dark shade on arc strike Ultra fast: 0.6 milliseconds Return to light state from 0.2S to 0.8S UV protection: DIN16 Optical class 1/1/1/2 Weight 420 grams
Application fields: MMA 10-150 / TIG 10-175 / MIG-MAG 10-200 Standards: EN 175 / EN 379
In stock
Telwin
Reference: 802336
€197.64
€247.05
163,34 € tax excl.
or 3 x 65,88 €
Free delivery
2-year warranty
Essential when the welding machine cannot be placed directly next to the welder, remote controls improve work efficiency and reduce welder fatigue.
Supplied with a 10 m cable.
In stock
Gys
Reference: 068674
€125.04
€138.93
103,34 € tax excl.
Free delivery
2-year warranty
LCD WELDING MASK ERGOTECH DREAM
Essential for safety, the ERGOTECH 5-9/9-13 optoelectronic welding helmet protects the welder's face and eyes from UV, infrared and spatter. Fully automatic, the mask switches from clear to dark state in a fraction of a second, from the moment the arc is struck. Supplied with a Multifit + headband, it frees the welder's hands and provides all the comfort needed for welding work.
This welding helmet features TRUE COLOR technology
UV/IR protection level: DIN 15
Clear shade: 3
Shade: adjustable from 5-9 and 9-13 13
Classification: 1/1/1/1
Field of view: 100 x 67 mm
Reaction time: 0.08 ms
Number of sensors: 4
Return to clear time 0.15>0.8 sec
Adjustments: sensitivity, shade tester, delay, grinding
Power supply: solar + 2 CR 2032 batteries
Weight: 560 g
Standards: EN 175 / EN 379
Applications
MMA: 5 to 400 A
TIG: 5 to 300 A
MIG/MAG: 5 to 400 A
Grinding mode (Grind)
Replacement lenses:
Outer lens 114 x 133 mm (ref. 043893)
Inner lens 103.7 x 69.5 mm (ref. 043695)
In stock
Reference: DESTPM
€2.42
€4.84
2,00 € tax excl.
Fast delivery
2-year warranty
Magnetic positioner
In stock
TOTAL
Reference: 41878
€40.23
€44.70
33,25 € tax excl.
Fast delivery
2-year warranty
20 V battery drill. Compact brushless motor. Maximum torque 55 Nm. Self-locking metal chuck with capacity up to 13 mm. With 22 torque settings and one screwdriving position. 2 mechanical speeds. RPM 0-500 / 0-2000. LED light. Battery and charger not included.
In stock
TOTAL
Reference: 41826
€59.49
€74.37
49,17 € tax excl.
Fast delivery
2-year warranty
20 V battery-powered hammer drill. Brushless motor. Maximum torque of 66 Nm. Metal and automatic chuck with 13 mm capacity, 22 tightening positions, one drilling position and one hammer position. Impact rate 30,000 bpm. RPM 0-550 / 0-2200. 2 speeds and LED light. Batteries and charger not included.
Supplier stock
TOTAL
Reference: 41879
€89.74
€99.72
74,17 € tax excl.
Fast delivery
2-year warranty
20 V battery-powered hammer drill. Compact brushless motor. Maximum torque of 96 Nm. Self-locking metal chuck with capacity up to 13 mm. With 22 clutch positions, one for screwdriving and one for hammering. 2 mechanical speeds. ROTATION SPEED 0-500 / 0-2000. Impact 30000/min. LED lighting. Battery and charger not included.
This product is Euro Welding's choice
In stock
TOTAL
Reference: 41214
€40.23
€44.70
33,25 € tax excl.
Fast delivery
2-year warranty
76 mm battery-powered grinder 20 V. No-load speed 19500 rpm. Disc diameter 76 mm. Arbor diameter M6. With 4 abrasive discs, 2 metal cutting discs and 1 diamond disc. Batteries and charger not included.
In stock
TOTAL
Reference: 40914
€60.37
€67.08
49,90 € tax excl.
Fast delivery
2-year warranty
12 L wet and dry vacuum cleaner. Maximum power of 1000 W. Suction capacity>=15 kPa. Tank capacity of 12 L. Suction hose diameter of 32 mm. Suction hose length of 1.5 m. Includes a floor nozzle, a plastic hose, a filter, a crevice tool, and a fabric dust bag.
In stock
Telwin
Reference: 802627
€150.24
€214.63
124,17 € tax excl.
or 3 x 50,08 €
Free delivery
2-year warranty
Supplier stock
Telwin
Reference: 804155
€194.10
€215.67
160,42 € tax excl.
or 3 x 64,70 €
Free delivery
2-year warranty
Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m
In stock
SILICONI
Reference: PROTECT 700
€55.36
45,75 € tax excl.
Fast delivery
2-year warranty
PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.
Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.
INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS
It is also possible to apply this anti-spatter product with a brush on the surface to be treated.
| Combinations | Price | |
| €144.29 | ||
| €55.36 | ||
In stock
Gys
Reference: GYSPOT 34.02-34.04
€1,184.78
979,16 € tax excl.
or 4 x 296,20 €
Free delivery
2-year warranty
The GYSPOT 34.02 and 34.4 have a power of 3500 A. These dent pullers are tools for dent repair and straightening of steel body panels (hood, door, roof, etc.). They feature several functions that make them complete and versatile tools. Thanks to its low power consumption, this nail puller model is powered by a simple 230 V outlet for the 34.02 model
We offer it in two versions: Single-phase 230 V (reference 065741) and three-phase 400 V (reference 067943)
A MULTI-FUNCTION DENT PULLER
Operating modes: • Welding of stars or rings for steel sheet pulling operations.
• Welding of corrugated wire, ideal for straightening a rounded profile (e.g.: wheel arch)
• Shrinking, for light impacts and finishing work.
• Use of the graphite pencil. • Welding of steel studs.
EASY TO USE
• Switch to toggle to graphite pencil mode.
• Intuitive, the potentiometer allows you to select both the power and the desired mode.
• Manual, the weld is generated by a simple press of the gun trigger.
It comes with an inertia hammer fitted with a star tip, nail puller + 3 stars - 1 shrinking tip and a ground pad
Cable lengths:
Ground: Section 50mm² - length 1.7 m
Gun: Section 50 mm² - length 2 m
| Combinations | Price | |
| €1,183.78 | ||
| €1,184.78 | ||
In stock
Gys
Reference: 052215
€1,115.02
921,55 € tax excl.
or 4 x 278,76 €
Free delivery
2-year warranty
This dent puller has a power of 3800 A
It runs on a 16A outlet and a 230 V power supply
It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments
Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened
It is supplied with a slide hammer + 1 box of accessories
Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m
In stock
CEPRO
Reference: 36.36.65
€448.70
€498.56
370,83 € tax excl.
or 4 x 112,18 €
Free delivery
2-year warranty
Omnium XL 435 cm triptych screen with curtain
Reference 36.36.65
Triptych welding screen with curtains
Total length 4.35 m - Width of central panel 215 cm + 2 pivoting side panels of 110 cm
Curtain height: 160 cm
Orange curtain - Compliant with standard EN ISO 25980
Curtain held by plastic suspension rings.
4 castors Ø 75 mm, 2 of which are fitted with brakes
Base and masts: rectangular tube 40 x 30 x 2 mm - round transverse tubes Ø 30 x 2 mm.
Grey frame RAL 7035
In stock
AEG Powertools
Reference: 4935451082
€197.01
€218.90
162,88 € tax excl.
or 3 x 65,67 €
Free delivery
2-year warranty
. BRUSHLESS* 18V motor
. Compact and powerful for all applications on your job site
. Most compact hammer drill on the market ( 151 mm long without chuck and 193 mm with )
. 75 Nm with 4.0Ah battery / 60 Nm with 2.0Ah battery
. 2 speeds 0-550 / 0-2100 rpm
. Supplied with a side handle and a 13mm self-tightening chuck for maximum versatility
. Handle and micro-texture coating for a firm and comfortable grip
. 1/4 HEX socket once the chuck is removed. The 25mm bit can be left in place even when the chuck is fitted
. Torque (tightening) and speed performance remain the same even when the tool is fitted with its offset chuck or angle head chuck
. Integrated LED lighting on the front of the tool to illuminate dark work areas
. 3-mode selector: drilling, screwdriving, hammer drilling
. AEG PRO Lithium-Ion technology with overload and overheat protection for longer tool and battery life
Batteries and charger available as optional extras below
In stock
AEG Powertools
Reference: 4935478943
€214.78
€238.65
177,51 € tax excl.
or 3 x 71,59 €
Free delivery
2-year warranty
. belt hook
. Interchangeable tool heads, rotatable 360° for easy switching between functions
. 6-position speed variator on a wider, more ergonomic trigger
. Softgrip handle
. Easy blade change without tools
. Oscillation angle 3.6°
. Compact and powerful - Lightweight 1.2 kg (1.46 with battery)
. LED lighting of the work area
. Design engineered for optimal ergonomics and better vibration absorption
. Supplied with cutting and sanding accessories
. Compatible with all tools in the PRO18V range
Batteries and charger available as optional extras below
In stock
Gys
Reference: 068063
€902.45
€1,002.73
745,83 € tax excl.
or 4 x 225,61 €
Free delivery
2-year warranty
The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).
Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).
In stock
Telwin
Reference: 829569
€154.28
€171.42
127,50 € tax excl.
or 3 x 51,43 €
Free delivery
2-year warranty
Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r
In stock
Gys
Reference: 079250
€1,547.80
€1,719.77
1 279,17 € tax excl.
or 4 x 386,95 €
Free delivery
2-year warranty
Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 240A at 60% / 200A at 100%
MMA duty cycle: 220A at 60% / 180A at 100%
Current range: 40 to 300A
Combines 3 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.2 mm and Alu 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A MAG torch (2T/4T) 3m long (8mm contact tip)
Digital interface with very intuitive settings
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 44kg
IP21 rating
Delivered with:
1 x 360 A 4m MB36 torch
1 x 400 Amp 4m ground clamp
1x User manual
2x 1.0/1.2 mm rollers
In stock
Telwin
Reference: 803400
€170.41
€213.01
140,83 € tax excl.
or 3 x 56,80 €
Free delivery
2-year warranty
Site case for safely transporting your TIG or MMA welder.
Resistant to shocks and moisture.
Internal dimensions 46.5 x 33.5 x H 22 cm - Weight 3.5 kg.
In stock
Gys
Reference: 030077
€226.87
€252.08
187,50 € tax excl.
or 3 x 75,62 €
Free delivery
2-year warranty
Powerful and versatile
Duty cycle: 85A at 60% and 70A at 100%
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10 mm thickness
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Weight: 6 kg - 2-year warranty
Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 meters) 16mm² (10/25 mm² connector)
1x Shoulder strap
Supplier stock
Telwin
Reference: 816209+802788
€2,707.37
€3,008.19
2 237,50 € tax excl.
or 4 x 676,84 €
Free delivery
2-year warranty
TIG AC/DC inverter welding machine (HF or LIFT), PULSED TIG (PULSE and EASY PULSE) and MMA.
Compatible with various types of materials such as steel, stainless steel, aluminum, titanium, copper, nickel, magnesium and their alloys.
Designed to guarantee excellent results on any thickness, even the finest, the PULSE mode (including the simplified EASY PULSE version) reduces material distortion by ensuring high arc stability.
Advanced functions: MIX AC-DC for preparing AC welding of large-mass workpieces; THINSPOT for spot welding of very thin sheet metal.
The CL screen facilitates interaction with the product and simplifies the adjustment of multiple TIG welding curve parameters depending on the job.
Ability to save and recall custom programs.
Electrode welding in both continuous and pulsed mode (MMA Pulse), guaranteeing excellent results with basic electrodes and in positional welding.
Designed to guarantee long-term reliability, it features a dedicated air tunnel cooling system that protects against dust and dirt.
Specifications:
TIG
MMA
Other specifications:
Supplied with TIG welding accessories.
1 TIG torch ST 26, length 4 m.
1 regulator with 2 pressure gauges for refillable cylinder.
1 ground clamp + 25 mm² cable, length 3 m
1 gas hose, length 2 m
In stock
ESAB
Reference: 0447750891
€2,776.95
€3,085.50
2 295,00 € tax excl.
or 4 x 694,24 €
Free delivery
2-year warranty
This ESAB Renegade ET 210Ip Advanced is a single-phase professional TIG welding machine with high-frequency ignition and MMA, with protection rating IP23, capable of being used even in the most demanding environments.
Thanks to its light weight, the various lifting points on the outer casing and the high-quality shoulder strap, the Renegade ET 210Ip Advanced can be easily transported.
Renegade ET 210Ip Advanced is equipped with an integrated active PFC circuit that allows it to be used even on a low-power supply or when an extension lead is used (length up to 100 m).
Easy to use. It offers direct access to parameter settings and features a
simple and intuitive user interface that allows you to read the parameters, even from a distance.
It enables MMA welding of rutile, basic, stainless steel, cast iron... and also cellulosic electrodes.
Technical specifications:
- High robustness with IP23 protection rating, for use in workshops and on job sites, in demanding environments
- Pulsed TIG up to 999 Hz to increase control of heat input and weld pool
- Integrated PFC circuit for a stable arc even with an extra-long power cable, up to 100 m
- Intuitive panel, quick to configure, for greater precision and reduced downtime
- Dual functionality - Current mode trigger to switch between two output current levels in order to control
heat input and weld pool size
- 4.3-inch colour screen with visual display of settings
- Easy access to up to 10 personal programs via the torch button
- Modular system to connect the cooling unit (optional) and the trolley (optional)
without tools
Examples of application sectors
Shipbuilding and offshore
Civil construction
Pipe manufacturing
Repair and maintenance
Heavy fabrication
Industrial and general manufacturing
Mining
Steel formwork
Delivered with:
1 EC 1001 cooling unit
1 earth clamp + 25 mm² cable 3 m long - 13 mm connector
1 strap for shoulder carrying of the unit when working at height + anchor points for lifting.
1 TIG torch Exeor SR 21, 4 m long
1 gas hose 4 m long
Electrode holder optional
Supplier stock
Lincoln Electric
Reference: B18268-1
€368.05
304,17 € tax excl.
or 4 x 92,01 €
Free delivery
2-year warranty
Duty cycle: 95A at 60% / 65A at 100%
Amperage range: 20 to 200A
Lift TIG function
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force
Power supply: 230 Volts 50/60 Hz – 16A –
Open circuit voltage: 84 V
Featherweight: 3.5 kg – 2-year warranty
Supplied with:
1x Cable with ground clamp (3 meters) (35/50 mm² connector)
1x Cable with electrode holder (3 meters) (35/50 mm² connector)
1x Power cable 1.5 meters
In stock
Kemppi
Reference: TX 163 GV D9 4M
€257.13
€302.50
212,50 € tax excl.
or 3 x 85,71 €
Free delivery
2-year warranty
This valve-type 17 TIG torch is supplied with a long back cap, 1 grey cerium tungsten electrode Ø 2.4 mm, 1 nozzle and a diffuser.
Its length is 4 m with a 9 mm connector (for a cable cross-section ranging from 10 to 25 mm²).
This Flexlite TX TIG torch 163 GV 4M offers excellent technical performance, extended consumable life and everyday welding comfort.
The durable silicone rubber material ensures a firm grip while the innovative torch handle design reduces wrist strain, allowing welders to focus on challenging tasks to achieve the perfect weld.
In stock
HELVI
Reference: 23000132
€49.20
€61.50
40,66 € tax excl.
Fast delivery
2-year warranty
Replacement torch for Helvi FOX 165 welding machine
Length 2.7m
The world of welding machines is a world apart in the realm of tools. The various tasks involved in welding are complex and require real training. Using unsuitable equipment can have terrible consequences on the expected welding results. Ensuring you make the right purchase is something we work on every day. Find on this page all our promotions, our selection of affordable products at the fairest prices, across a wide choice of brands and references, whether for welding machines or welding accessories. In this selection you will find the best price offer for any given piece of equipment or product.
Performing a weld requires some equipment, the most important of which is the welding machine. Whether you want to weld iron, stainless steel or aluminium, a welder is essential. Arc welding, semi-automatic welding, TIG, MIG, MIG MAG, Inverter welder — from professional to amateur, every welder gets their rod at EURO-WELDING!
The welding machine is chosen according to welding needs. Its role is to transform the input electrical current to make it more suitable for welding. Several categories of welding machine can be distinguished, including Inverter welders, semi-automatic machines, MIG machines, TIG welding machines, and MAG machines, to name but a few.
When choosing a welding machine, whatever type it may be, it is important to take into account the work you wish to carry out. If you have any doubt, do not hesitate to call our customer service for advice on choosing your welding machine. On this page you will find a wide variety of welding machines from major brands such as Gys, Telwin, Déca… All these machines are offered at a promotional price and will allow you to weld whatever you need. MIG MAG, TIG, plasma cutting and all other types of welding machines are available on this page — don't hesitate any longer and make your choice. Although these welding machines are on promotion, they are quality machines without exception, guaranteeing a level of comfort that some brands cannot offer, and when used correctly, they can enable you to achieve professional results!
The MIG welding machine is a type of welder that combines the use of electric current and gas. The acronym MIG stands for Metal Inert Gas. Its distinctive feature is to create a short circuit, which maintains the voltage level. This short circuit also produces an electric arc, generated between the workpiece and the MIG machine.
Semi-automatic or MIG-MAG welding machines are among the elite of arc welding machines. They are characterised primarily by good welding speed, excellent productivity, their gas emission and their electrodes. Thanks to the high speed of the MIG-MAG welding machine, there is no need for multiple test runs before achieving the desired result. Regarding productivity, it is the ideal model for welding highly resistant and thick metals. Semi-automatic welding allows a higher welding output thanks to its flux-cored wire, which unrolls continuously. Indeed, the welding process involves an electric arc that melts a filler metal stored on a spool in or on the welding machine, which unrolls at the speed controlled at the torch. The welding wire contains a flux in its core that regulates its melting during welding, requiring or not the use of gas (flux-cored wire or gas-shielded wire). The melting of the wire, which replaces the electrode, enables the assembly of metal parts.
Highly appreciated for personal or professional welding projects, the TIG welder — like most arc welding machines — transforms the input current in order to facilitate welding in record time. This characteristic is common to all types of arc welding machines. However, given the definition of the acronym TIG (Tungsten Inert Gas), this type of machine welds using a tungsten electrode and an inert gas. TIG welding is therefore a derived form of electric arc welding. A neutral gas is diffused through a ceramic torch containing a non-fusible refractory tungsten electrode (needle). This process achieves a very high quality weld.
The TIG welding machine can weld thin carbon steel sheets (standard iron), stainless steel tubes or thin tubes. The weld quality is remarkable for its fineness and appearance.
Since the choice of a welding machine depends on certain essential criteria for the user, thanks to its various characteristics, the Inverter welding machine model is the most suitable for certain types of welding work. Especially for beginners in the field, this model is the most appropriate for its lightness and ease of handling. In other words, it is the beginner's welding machine. If you are just starting out, go straight to the MMA Inverter. The new generation of these machines is a whole different world. Known for its technological advantages, the Inverter welding machine features a few electronic options not found on previous models.
Also discover on this page welding accessories and consumables on promotion. EURO-WELDING has always been able to offer the widest choice of equipment, tools and accessories for all types of welding. We select our products from the biggest brands to guarantee quality and reliability. Whether you are looking for a welding mask, a chipping hammer, wire brushes, rutile rods, wire spools… EURO-WELDING will be able to answer your questions and meet your needs. We constantly renew and add new products and new product ranges. This way, we can offer our customers promotions on various welding equipment and accessories throughout the year, at great prices!
EURO-WELDING offers you different types of welding machines on promotion — enjoy an attractive price and the lowest on the market to get yourself quality equipment!
We also offer on this page a simple and comprehensive range of ARC, MIG, TIG, torch welding accessories and consumables at promotional prices: MIG welding torches, TIG welding torches, welding wire, gasless flux-cored wire, welding electrodes, welding masks and helmets, welding torches…
If you are looking for a "pack" (an offer made up of several different but complementary products), we suggest you visit our special offers page!
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
