Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Reference: 802955
Automatic plasma torch length 12 m - with consumables
€942.80
779,17 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and even malfunction of the entire unit.
Regularly check the wear condition of the protective nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Lincoln Electric
Reference: W0300699A
€126.05
104,17 € tax excl.
Free delivery
2-year warranty
This compass kit for single-phase plasma torch is designed for use with Lincoln plasma cutters fitted with a manual LC 25-65 and 105 type torch
This kit includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut a circle with a maximum diameter of 82 cm.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.- "Centre punch" centring guide for precise centring without perforating the sheet metal.
In stock
Gys
Reference: 037557
(4 reviews)
€39.33
32,50 € tax excl.
Fast delivery
2-year warranty
1 diffuser 20/70 A for plasma torch AT -70 -MT 70
Supplier stock
Gys
Reference: 064720
€329.73
272,50 € tax excl.
or 4 x 82,43 €
Free delivery
2-year warranty
This complete kit IS suitable for the Gys Cutter 125 CT plasma torch
Supplier stock
Telwin
Reference: 804976
€149.23
123,33 € tax excl.
Free delivery
2-year warranty
This CNC interface kit is installed between your plasma cutter and a numerically controlled cutting table
This kit is compatible with TELWIN brand plasma cutters whose model names are listed below:
Superior Plasma 70-100-160.
Cable length 10 m
In stock
Gys
Reference: 037618
(1 review)
€87.73
72,50 € tax excl.
Fast delivery
2-year warranty
Ohmic detection nozzle 20 / 70 A designed for use with the Plasma torch reference AT-70
In stock
Lincoln Electric
Reference: W03X0893-66A
(2 reviews)
€77.51
64,06 € tax excl.
Fast delivery
2-year warranty
1 gouging nozzle for Lincoln LC 105 plasma torch, manual or automatic
Compatible with the Tomahawk 1538 plasma cutter
In stock
Telwin
Reference: 804156
(2 reviews)
€200.65
165,83 € tax excl.
or 3 x 66,88 €
Free delivery
2-year warranty
Replacement PK type torch for Telwin Technology 54 XT plasma cutter
EURO connector
Max current: 35 A @35%
Maximum cutting thickness 10 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length 4 m
Save 10%
Supplier stock
Telwin
Reference: 804155
€194.10
€215.67
160,42 € tax excl.
or 3 x 64,70 €
Free delivery
2-year warranty
Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m
In stock
Lincoln Electric
Reference: W100000329
€49.31
40,75 € tax excl.
Fast delivery
2-year warranty
5 nozzles 45 A for Lincoln plasma cutter torch, original supply with the Tomawak 45
In stock
Lincoln Electric
Reference: W03X0893-5R
€49.91
41,25 € tax excl.
Fast delivery
2-year warranty
3 diffusers for Lincoln plasma cutter torch PC 210 - PC 208 and Tomahawk 30K
This diffuser is suitable for Lincoln torches model LC 25 and LC30
In stock
Lincoln Electric
Reference: W100000326
€24.71
20,42 € tax excl.
Fast delivery
2-year warranty
5 nozzles for Lincoln Tomahawk 30K plasma cutter torch
Nozzle suitable for the Lincoln LC 30 torch model
In stock
Lincoln Electric
Reference: w100000333
€92.47
76,42 € tax excl.
Fast delivery
2-year warranty
2 diffusers for Lincoln plasma cutter torch model LC 45, compatible with the original torch supplied with the Tomawak 45
In stock
Telwin
Reference: 804169
(1 review)
€58.48
48,33 € tax excl.
Fast delivery
2-year warranty
This compass kit is suitable for the torches on the following plasma cutters:
Technology plasma 41 XT
Technology plasma 54 XT
Technology plasma 60 XT
In stock
Gys
Reference: 037601
(3 reviews)
€47.70
39,42 € tax excl.
Fast delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
Supplier stock
Lincoln Electric
Reference: W03X0893-119A
(1 review)
€499.13
412,50 € tax excl.
or 4 x 124,78 €
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making very precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation locking).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches LC65 - LC105
- Premium quality.
In stock
Gys
Reference: 037977
(1 review)
€79.65
65,83 € tax excl.
Fast delivery
2-year warranty
Replacement trolley for the MT70/125A compass kit
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m