Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878
Reference: W008366
KEMPPI - EURO MINARC MIG Adapter
€190.58
157,50 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878
Characteristics of KEMPPI - EURO MINARC MIG Adapter
| Cooling type | Air |
Accessories for KEMPPI - EURO MINARC MIG Adapter
€79.65
KEMPPI - Accessories kit for MINARMIG welding machine
Reference: MG000601
€57.68
KEMPPI - Wire liner for aluminium wire
Reference: 4307660
€26.11
KEMPPI - 10 standard contact tips M6 thread
Reference: CTC1S
€19.66
KEMPPI - 2 gas nozzles + insulator
Reference: 958010101
€7.56
KEMPPI - 1 gas diffuser
Reference: 9580173
€17.24
KEMPPI - 5 insulating rings
Reference: 9591079
€39.33
KEMPPI - Drive rolls for Minargmig welder
Reference: W00
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
A.T.I
Reference: 16501
€4.03
3,33 € tax excl.
Fast delivery
2-year warranty
Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm
In stock
Gys
Reference: 042889
(13 reviews)
€4.54
3,75 € tax excl.
Fast delivery
2-year warranty
This adapter for a 5 kg welding wire spool is mounted on the shaft of your 15 kg spool holder so that your welding machine accepts Ø 200 mm spools.
It is used in particular with the Multi-Pearl 201-4 welding machine available on our website.
In stock
Trafimet
Reference: GM0501
(4 reviews)
€7.88
6,51 € tax excl.
Fast delivery
2-year warranty
Wire guide liner for steel or stainless steel wire - Length 4 m
3 liners available to choose according to the diameter of the selected welding wire
For wire Ø 0.6 to 0.9 mm: Inner diameter 1.4 mm and outer Ø of the liner 4.6 mm (GM0501)
For wire Ø 1 and 1.2 mm: Inner diameter 2 mm and outer Ø of the liner 4.6 mm (GM0511)
For wire Ø 1.2 and 1.6 mm: Inner diameter 2.4 mm and outer Ø of the liner 4.7 mm (GM0541)
In stock
Telwin
Reference: 742575
(2 reviews)
€10.04
8,30 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
Save 10%
In stock
DECA
Reference: 010464
(12 reviews)
€75.62
€84.02
62,50 € tax excl.
Fast delivery
2-year warranty
MIG torch for DECA welding machine using flux-cored wire (gasless) suitable for the following machines:
DECASTAR 130 AC
STARFLUX 130 AC
D-MIG 230
Length 2 m
140 A @ 60%
This reference is a replacement accessory; it is not required when purchasing a new welding machine.
In stock
Gys
Reference: 041233
(14 reviews)
€50.22
41,50 € tax excl.
Fast delivery
2-year warranty
This kit includes:
5 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 aluminium
3 contact tip holders 250 A
5 nozzle springs
3 gas nozzles
In stock
Telwin
Reference: 742054
(5 reviews)
€15.63
12,92 € tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 1- 1.2 mm
Compatible with TELWIN machines:
TECHNOMIG 215 Dual Synergic - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic - 300 syn. - 230 - 330 wave-300 syn. -
MASTERMIG 220/2 - 270/2 - 300
TELMIG 281/2
In stock
Oxyturbo
Reference: 255200.01
(51 reviews)
€49.91
41,25 € tax excl.
Fast delivery
2-year warranty
This regulator for refillable cylinders is designed for use with neutral welding gases such as pure Argon or Argon + CO²
They comply with and are designed according to standard EN 585/ISO 2503
Gauge dimensions: Ø 50 mm
This regulator has an adjustable flow rate from 0 to 30 litres / minute
Regulator tested up to 300 Bar
Type C connection thread
Made in Italy
The quick isocoupler fittings sold on our website are not compatible with this regulator
In stock
SOUDO METAL
Reference: MIMTSM
(68 reviews)
€10.03
8,29 € tax excl.
Fast delivery
2-year warranty
Magnetic holder for MIG torch
In stock
Trafimet
Reference: GM0512
€8.52
7,04 € tax excl.
Fast delivery
2-year warranty
Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm
In stock
Sacit
Reference: WP2116
(39 reviews)
€5.24
4,33 € tax excl.
Fast delivery
2-year warranty
Specific cable for welding, compliant with the European low voltage directive.
Sheath color: BLACK.
Reference standard: H01N2-D HAR.
Operating characteristics:
Maximum operating temperature of the copper braid: 90 °C.
Short-circuit temperature: 250 °C.
Good resistance to abrasion, atmospheric agents and ozone.
Good resistance to frequent bending and twisting.
Type of use: Production of ground cables and electrode holder cables.
During application the welding cable must not be coiled.
Three sections available:
16 mm² for use 120 A @60% - 130 A @35%
25 mm² for use 164 A @60% - 184 A @35%
35 mm² for use 210 A @60% - 241 A @35%
Sold by the linear meter
If you want 2 linear meters of cable, you must order 2 pieces in your cart.
In stock
Sacit
Reference: KIT-562/KIT-564
(17 reviews)
€52.86
43,69 € tax excl.
Fast delivery
2-year warranty
Electrode holder PARVA2 200 Amperes + 25 mm² cable length 3 m (KIT-562) or length 4 m (KIT 564)
Earth clamp opening 45 mm
Duty cycle 150 A @60% - 200 A @ 35%
Connector 9 mm
In stock
Le Lorrain
Reference: 150377
(9 reviews)
€19.87
16,42 € tax excl.
Fast delivery
2-year warranty
Female coupler
Compatible with isocouple quick-connect fittings 150380-150382-150-388-150376
This fitting allows the assembly of two hoses together when combined with fitting 150376
Supplier stock
Jelt
Reference: Jelt-58
(18 reviews)
€12.35
10,21 € tax excl.
Fast delivery
2-year warranty
3 products are available for 3 different results after application:
Galva Flash
The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance
Matt Galva
The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.
Gloss Galva
The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.
In stock
Kemppi
Reference: 9580173
(1 review)
€7.56
6,25 € tax excl.
Fast delivery
2-year warranty
1 gas diffuser compatible with KEMPPI torches of type GC223GMM3* - GC253G35 - GC253G5
* Torch model fitted on MINARMIG 170 AND 200 EVO welding machines sold on our website.
Save 20%
In stock
Sacit
Reference: F11808S
(35 reviews)
€6.75
€8.43
5,58 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
This adapter allows you to convert your MINARC MIG unit to accept a EURO connector torch.
It must be used with the appropriate wire liner guides references SP008856 or SP008878