The advantages of the Lincoln Sprinter 180-S:
Even more powerful. Ideal for intensive work
High duty cycle at 180 A – 35% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm diameter
Open circuit voltage of 95V!
Multi-process: MMA welding and Lift TIG
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4kg - Dimensions 162x305x438mm
3-year warranty
Delivered without accessories
554,17 € tax excl.
The advantages of the Lincoln Sprinter 180-S:
Even more powerful. Ideal for intensive work
High duty cycle at 180 A – 35% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm diameter
Open circuit voltage of 95V!
Multi-process: MMA welding and Lift TIG
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4kg - Dimensions 162x305x438mm
3-year warranty
Delivered without accessories
Description
The SPRINTER 180S combines power, reliability, and ease of use. Thanks to its cutting-edge technologies, it delivers fast arc striking, excellent arc stability, and an intuitive user interface. Whether you are an experienced welder or a beginner, you benefit from optimal operating comfort and high-quality welds.
Integrated welding technologies:
Hot Start: Temporary increase in current at start-up for fast arc striking without electrode sticking.
Arc Force: Maintains a stable arc even when the gap varies, reducing the risk of sticking and improving weld quality.
Intuitive digital interface: 7-segment display and simplified controls for precise, fast, and error-free adjustment.
Lift TIG Mode: Smooth arc starting without high frequency, ideal for a clean fusion while avoiding interference with electronic equipment.
Electrical stability and autonomy on site:
PFC (Power Factor Correction) Technology:
Optimized power supply to withstand voltage variations, even with extension cords up to 100 m (recommended fuse D20A or D25A – min. cable 4 mm²).
→ Guarantees consistent welding performance, without quality loss or interruption.
Generator compatibility:
Perfectly suited for use in isolated conditions, the SPRINTER 180S goes with you everywhere, even without mains power.
Portable and rugged design.
Featherlight: Only 8.4 kg, easy to carry.
Ergonomic design: Integrated handle + shoulder strap for comfortable transport on all types of job sites.
Reinforced casing: Withstands demanding environments and extreme conditions.
Characteristics of LINCOLN - SPRINTER 180-S|MMA Welding Machine
| Supply voltage (in Volts) | 50 / 60 Hz - 230 Volts | Fuse (in Amperes) | 16 A |
| MMA power range (in Amperes) | 20 - 180 A | Duty cycle at 40°C MMA | 180A@35% |
| Open circuit voltage (in Volts) | 95 | Possible electrode type | Rutile - basic - cellulosic |
| Type of output current | DC | Generator compatible | Yes |
| Power in kW | 6 | Welding process | MMA / TIG LIFT |
| Warranty | 3 years | Dimensions (in mm) | 162 X 305 X 438 |
| Weight in kg | 8.4 | Protection rating | IP23S |
| Usage | Professional Professional |
Max MMA Power | 200 A Max |
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
Supplier stock
ESAB
Reference: 0447700881
€1,104.13
912,50 € tax excl.
or 4 x 276,03 €
Free delivery
2-year warranty
Why choose the ESAB Renegade ES 210i?
Delivers maximum welding power for a single-phase unit
Welds 6010 cellulosic electrodes in addition to Rutile, Basic, Stainless, and Cast Iron electrodes
Duty cycle: 210A@25% and 135A @60%
Two welding processes: MMA / Lift TIG
Compact and powerful: 10–210A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 4 mm
Generator compatible – IP23S
Ideal for shipbuilding, pipe manufacturing and industry
3-year warranty
Supplied with:
1 electrode holder + 25 mm² cable, 3 m length – 13 mm connector
1 earth clamp + 25 mm² cable, 3 m length – 13 mm connector
1 strap allowing the unit to be carried over the shoulder when working at height + anchor points for lifting.
In stock
Gys
Reference: 083615
€604.00
499,17 € tax excl.
or 4 x 151,00 €
Free delivery
2-year warranty
Processes: MMA / MMA Pulse / TIG Lift
Maximum current: 200 A
Welding of steel, stainless steel, cast iron (up to 10 mm)
Flexible Voltage technology (85–265 V): stable arc even on extension cord
Activatable VRD: enhanced safety
Integrated features: Hot Start, Arc Force, Antisticking, DownSlope
Generator compatible
Overvoltage protection (PROTEC 400)
Use on extension cord up to 100 m
Included:
3 m cables – 25 mm²
TIG 17 valve torch
Supplier stock
Gys
Reference: 083554
€332.75
275,00 € tax excl.
or 4 x 83,19 €
Free delivery
2-year warranty
Duty cycle: 95A at 60% and 80A at 100%
MMA and TIG Lift process
Current range: 15 to 180A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 64 V
Weight: 3.7kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
Optional: Valve TIG torch - 4m (044425)
Supplier stock
Gys
Reference: 082786
€1,104.13
912,50 € tax excl.
or 4 x 276,03 €
Free delivery
2-year warranty
Facilitates vertical welding
Outdoor use IP23
High duty cycle: 175A at 60%
MMA and Lift TIG process
Current range: 5 to 200A
Welds steel, cast iron and stainless steel up to 10mm thick
Accepts Rutile, Basic, Stainless, Cast iron, Aluminum and Cellulosic electrodes (up to Ø 5 mm)
Technologies: Hot Start, Arc Force, Anti-Sticking, PFC, Protec 400
Power supply: 230 Volts 50/60 Hz - 16A -
Storage of 10 programs per process
Open circuit voltage: 96 V
Weight: 5.5 kg - 2-year warranty
Delivered without accessories
This product is Euro Welding's choice
In stock
Soudexpert
Reference: 411202
€89.74
€112.18
74,17 € tax excl.
Fast delivery
2-year warranty
Even more power for easy welding!
LCD control screen for easy and fast adjustment
MMA and TIG LIFT function
Easily welds coated electrodes: rutile, stainless steel, cast iron and basic up to Ø 4mm
on steel, cast iron and stainless steel up to 10 mm thick
Duty cycle: 60% - 85A
Inverter technology: immediate arc striking, smooth fusion and protection
Welding aids: Hot start, Arc force, Anti-stick
Power: 20-160A - 6 kVA
Open circuit voltage: 65V
Featherweight (4.5kg) - Dimensions: D26xH20xW11cm
Compact size and carrying handle
2-year warranty
Delivered complete with:
- 1 Electrode holder + 16 mm² cable (1.6 meters)
- 1 Ground clamp + 16 mm² cable (1.4 meters)
- 1 220V single-phase power cable (1.5 meters)
Schumacher
Reference: P200
€133.10
€166.38
110,00 € tax excl.
Free delivery
2-year warranty
SCHUMACHER MMA Inverter welding machine P200
Current adjustment range from 10 to 180 A, allowing the use of basic or rutile electrodes from Ø 1.6 to 4 mm
Its electronic board features the following processes:
Anti-sticking (anti-stick) to prevent the electrode from sticking to the workpiece.
Hot Start to facilitate arc striking
Arc Force increasing arc strength to prevent it from extinguishing, particularly in difficult welding positions.
Delivered with:
1 Electrode holder + 16 mm² cable, length 2 m
1 Ground clamp + 16 mm² cable, length 1.85 m
In stock
Telwin
Reference: 816236
€341.83
€427.29
282,50 € tax excl.
or 4 x 85,46 €
Free delivery
2-year warranty
Key features of the Telwin 211/S welding machine:
Welding current display
Robust and elevated protection against dust, water and dirt
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
High duty cycle (20°C): 180A @95%
Compact and powerful: 10-180A single-phase (230V)
Two welding processes: MMA / Lift TIG
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Easy to transport thanks to its carry case
Made in Italy
2-year warranty
This machine is supplied in a carry case and includes:
1 electrode holder + cable (length 180 cm, cross-section 25 mm²)
1 ground clamp + cable (length 180 cm, cross-section 25 mm²)
1 power supply cable with plug, length 2 m
In stock
Kemppi
Reference: 6102150
€700.79
€875.99
579,17 € tax excl.
or 4 x 175,20 €
Free delivery
2-year warranty
Key features of the Kemppi Minarc Evo 150:
The little giant of MMA welding by Kemppi
Excellent welding and arc-striking quality
Automatic dynamic function
Compatible with long power cables
High duty cycle: 140A@35%
Lightweight and portable - 4kg
Generator compatible
Made in Finland
2-year warranty
This unit is delivered with:
1 electrode holder + cable (length 3m, cross-section 16 mm²)
1 earth clamp + cable (length 2m, cross-section 16 mm²)
1 power cable with plug, length 3m with Schuko plug
In stock
ESAB
Reference: 0705002006
€388.21
€431.34
320,83 € tax excl.
or 4 x 97,05 €
Free delivery
2-year warranty
Why choose the Rogue ESAB ES 151i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 150A @25%
Compact and powerful: 10–150A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 3.2 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty
Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height
Supplier stock
Lincoln Electric
Reference: B18267-1
€297.45
245,83 € tax excl.
or 3 x 99,15 €
Free delivery
2-year warranty
Excellent value for money
Duty cycle: 95A at 60% / 75A at 100%
Amperage range: 15 to 160A
Lift TIG function
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force
Power supply: 230 Volts 50/60 Hz – 16A –
Open circuit voltage: 84 V
Featherweight: 3.5 kg – 2-year warranty
Supplied with:
1x Cable with ground clamp (3 meters) (35/50 mm² connector)
1x Cable with electrode holder (3 meters) (35/50 mm² connector)
1x Power cable 1.5 meters
This product is Euro Welding's choice
In stock
Telwin
Reference: 816250
€472.90
390,83 € tax excl.
or 4 x 118,23 €
Free delivery
2-year warranty
Key features of the Telwin Technology 186XT welder:
Ideal for demanding situations and harsh environments
Designed to withstand impacts: anti-shock protection and metal handle
Duty cycle for intensive use (20°C): 160A @35%
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5–160A single-phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Supplied in a carry case
Made in Italy
2-year warranty
This unit is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m
In stock
Gys
Reference: 029972
€206.71
€229.68
170,84 € tax excl.
or 3 x 68,90 €
Free delivery
2-year warranty
Ideal for hobbyists or professionals
Duty cycle: 45A at 60% and 40A at 100%
Current range: 10 to 130A
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic stick electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Featherlight: 2.9kg - 2-year warranty
Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap
In stock
Gys
Reference: 031210
€437.62
361,67 € tax excl.
or 4 x 109,41 €
Free delivery
2-year warranty
Professional performance & advanced technology
3 welding modes: MMA, MMA Pulse and TIG Lift DC
Duty cycle: 200A at 64%
Current range: 10 to 200A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 5 mm
Technology: Hot Start, Arc Force, Anti-Sticking, MMA Pulse, TIG Lift, ADS and PFV
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 96 V
Weight: 9kg - 2-year warranty
Delivered in a carrying case with:
1x Ground cable with clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Electrode holder cable (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap
Optional: TIG torch with valve - 4m - 10/25mm² (044425)
In stock
Gys
Reference: 083622
€136.13
€151.25
112,50 € tax excl.
Free delivery
2-year warranty
Ideal for getting started with MMA welding
Duty cycle: 50A at 60% and 35A at 100%
Current range: 10 to 100A
Welds steel, cast iron and stainless steel up to 5mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 2.5 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 63 V
Featherlight: 2kg - 2-year warranty
Supplied with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap
Supplier stock
Gys
Reference: 084919
€351.90
290,83 € tax excl.
or 4 x 87,98 €
Free delivery
2-year warranty
EURO-WELDING offers you this GYS pack including:
- 1 X GYSTEC 180LA welding machine
- 1 X Techno 11 welding helmet
Supplier stock
Telwin
Reference: 816259
€499.13
412,50 € tax excl.
or 4 x 124,78 €
Free delivery
2-year warranty
Key features of the Telwin Technology 236XT welding machine:
More power for intensive use (40°C): 200A @35%
Ideal for demanding situations and harsh environments
Designed to withstand shocks: Anti-shock protection and metal handle
Welds rutile, basic, stainless steel and cast iron electrodes from Ø 1.6 to 4 mm
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5-200A single phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Supplied in a carry case
Made in Italy
2-year warranty
This machine is supplied in a carry case and includes:
1 electrode holder + cable (length 3m, section 25 mm²) Ø 50
1 earth clamp + cable (length 2m, section 25 mm²) Ø 50
1 power supply cable with plug, length 2m
The advantages of the Lincoln Sprinter 180-S:
Even more powerful. Ideal for intensive work
High duty cycle at 180 A – 35% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm diameter
Open circuit voltage of 95V!
Multi-process: MMA welding and Lift TIG
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4kg - Dimensions 162x305x438mm
3-year warranty
Delivered without accessories
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
