ESAB | Multi-process welding machine ROGUE EM 180
  • ESAB | Multi-process welding machine ROGUE EM 180

The ESAB Rogue EMP 180 is a multi-process welding machine with INVERTER technology, designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system delivers industrial-grade arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics according to the material being welded.
Weighing only 16.2 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.

Its features

Large 14-segment display – instant readout of voltage and wire feed speed for clear visibility
- Synergic welding programs: easy adjustment of welding parameters for welds on material thicknesses from 0.5 to 8.0 mm
- Power Factor Correction (PFC) – ensures a stable arc, resistant to power fluctuations even when working with extension cables up to 100 m
- Unique robust industrial design with multiple lifting points and optimised cable management
- Arc Dynamics: Allows precise adjustment of arc characteristics to achieve a hard arc for carbon steel or a soft arc for stainless steel.
- Provision for torch with integrated spool; Rogue automatically configures when the torch is connected.
- IP23S protection rating for ideal use on job sites.

The Esab Rogue EM 180 comes with:

- 1 power cable 3 metres with Schuko 16 A plug,

- 1 MIG torch MXL 201 Euro 3 m,

- 1 earth cable kit 16 mm², 3 m,

- 1 gas hose with quick connector 4.5 m,

- 1 ESAB OK AristoRod mild steel/iron welding wire spool 12.50 0.8 mm 1 kg,

- 1 drive rollers 0.6/0.8 mm V (fitted), 0.8/1.0 mm V and 0.8/0.9 mm VK x flux-cored wire,

- safety instructions.

Reference: 0700301091

ESAB | ROGUE EM 180 Multi-Process Welder

ESAB
(3 reviews)
By purchasing this product you will earn 21.15 € thanks to our loyalty program. Your cart will total 21.15 €.
favorite_border favorite

Based on 3 reviews

See the reviews
€1,279.58

1 057,50 € tax excl.

Supplier stock
Dispatched within 5 to 7 days
A question about this product? Characteristics Accessories The technical data sheet The manual

The ESAB Rogue EMP 180 is a multi-process welding machine with INVERTER technology, designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system delivers industrial-grade arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics according to the material being welded.
Weighing only 16.2 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.

Its features

Large 14-segment display – instant readout of voltage and wire feed speed for clear visibility
- Synergic welding programs: easy adjustment of welding parameters for welds on material thicknesses from 0.5 to 8.0 mm
- Power Factor Correction (PFC) – ensures a stable arc, resistant to power fluctuations even when working with extension cables up to 100 m
- Unique robust industrial design with multiple lifting points and optimised cable management
- Arc Dynamics: Allows precise adjustment of arc characteristics to achieve a hard arc for carbon steel or a soft arc for stainless steel.
- Provision for torch with integrated spool; Rogue automatically configures when the torch is connected.
- IP23S protection rating for ideal use on job sites.

The Esab Rogue EM 180 comes with:

- 1 power cable 3 metres with Schuko 16 A plug,

- 1 MIG torch MXL 201 Euro 3 m,

- 1 earth cable kit 16 mm², 3 m,

- 1 gas hose with quick connector 4.5 m,

- 1 ESAB OK AristoRod mild steel/iron welding wire spool 12.50 0.8 mm 1 kg,

- 1 drive rollers 0.6/0.8 mm V (fitted), 0.8/1.0 mm V and 0.8/0.9 mm VK x flux-cored wire,

- safety instructions.

-20%

Buy a welding machine and get 20% off all consumables on the site

By purchasing this product you will earn 21.15 € thanks to our loyalty program. Your cart will total 21.15 €.

100% secure payment in 2, 3, 4 or 10 instalments by credit card or PayPal
Secure payment methods
Expert after-sales service
Authorised Euro Welding dealer
A question about this product?

Characteristics of ESAB | ROGUE EM 180 Multi-Process Welder

Supply voltage (in Volts) 50 / 60 Hz - 230 Volts Fuse (in Amperes) 16 A
MMA power range (in Amperes) 10 - 150 A MIG welding adjustment range (in Amperes) 30 - 180 A
TIG welding adjustment range (in Amperes) 10 - 150 A Duty cycle at 40°C MMA 150 A@25% - 97 A@60% - 75 A@100%
MIG-MAG duty cycle at 40°C 180A@25% - 116 A@60% -90 A@100% Open circuit voltage (in Volts) 78
Possible electrode type Rutile - basic Uses steel wire diameter 0.6 to 1 mm
Uses stainless steel wire diameter 0.8 - 1 mm Uses aluminum wire diameter 0.8 to 1 mm
Uses flux-cored wire (gasless) diameter 0.6 mm - 0.8 mm 0.9 mm Uses CuSi3 - CuAL (Brazing) wire diameter 0.8 - 1 mm
Ventilated Yes Nature of materials to be MMA welded Steel - Stainless steel - Cast iron
Generator compatible Yes Welding process MMA - MIG
Warranty 3 years Dimensions (in mm) 590 X 220 X H 385
Weight in kg 16,2 Number of drive rolls 2 rollers
Protection rating IP23S Suggested generator power 10 kVA
Cooling type Air Usage Professional
Uses spools of diameter Ø100 and 200mm Synergy No

Customer reviews

Product reviews
Guaranteed Reviews View the certificate

Reviews subject to moderation

0
1★
0
2★
0
3★
0
4★
3
5★
10/10


Based on 3 reviews

  • modern, it allows a lot of freedom of implementation and welding posture without complicated adjustment

    Laurent d. Published on Oct 12, 2024 at 04:24 pm (Order date: Sep 15, 2024)
    5

  • Excellent quality and very easy to handle

    Romain r. Published on Sep 10, 2024 at 06:48 pm (Order date: Aug 24, 2024)
    5

  • Super welding machine that meets my expectations

    Patrice L. Published on Aug 13, 2024 at 05:23 pm (Order date: Jul 23, 2024)
    5


Expert advice for professionals and individuals

Benefit from the support of specialists, whatever your profile.

Secure payment

Your transactions are protected by the latest security technologies.

Express delivery in 24/48 h

Fast dispatch to France, Europe and overseas territories upon confirmation of your order.

Best price guaranteed

Enjoy the most competitive prices on the market all year round.

16 other products in the same category:

favorite_border favorite
KEMPPI - MINAR MIG M 223 with integrated 3M torch
Save 10%

Supplier stock

Kemppi

Reference: MIM223GM

KEMPPI - MINAR MIG M 223 with integrated 3M torch

€1,864.40

€2,071.56

1 540,83 € tax excl.

or 4 x 466,10 €

Free delivery

2-year warranty

KEMPPI - MINAR MIG M 223 with integrated 3M torch

favorite_border favorite
GYS - MULTIWELD 250T-C welding machine with accessories
Save 20%

Supplier stock

Gys

Reference: 078659

GYS - MULTIWELD 250T-C welding machine with accessories

€1,269.49

€1,586.87

1 049,17 € tax excl.

or 4 x 317,37 €

Free delivery

2-year warranty

Compact three-phase generator for workshop and job sites
Welds steel, stainless steel and aluminium
MIG duty cycle: 170A at 60% / 130A at 100%
MMA duty cycle: 150A at 60% / 120A at 100%
Amperage range: 40 to 250A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1.2mm and Alu 0.9 to 1.2mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 5 mm) with Anti-stick function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A 3m MAG torch with 2T/4T function
Digital interface and very intuitive adjustment
Compatible with 10kva generator
Three-phase power supply 400 V - 16 A
Dimensions: 58 x 52x 32 cm - 32kg
IP23 rating for outdoor use

Delivered with:
1 x 250 A 3m MB25 torch
1 x 4m ground clamp
1x User manual
2x rollers 0.8/1.0

favorite_border favorite
KEMPPI | MinarMig 190 Auto MIG-MAG welding machine

Kemppi

Reference: 61008190

KEMPPI | MinarMig 190 Auto MIG-MAG welding machine

€1,608.30

1 329,17 € tax excl.

or 4 x 402,08 €

Free delivery

2-year warranty

Adaptive tool for the mobile welder
Excellent welding quality and precise arc ignition
High duty cycle: 190A@ 35% - 140A@60% - 100A @ 100%
Uses Ø 100 mm (1 kg) or Ø 200 mm (5 kg) spools
Generator compatible
3-metre torch
Lightweight and portable
LCD control panel
IP23 rating for outdoor use
Dimensions: 450x227x368mm - Weight 14.2kg
2-year warranty

Supplied with:

1 torch, length 3 m with ergonomic handle, fitted with a contact tip for steel or stainless steel wire Ø 0.8 mm
1 reversible roller for stainless steel or steel wire Ø 0.8/1 mm
1 ground clamp + cable section 16 mm², length 2.50 m
1 gas hose, length 5 m
 

favorite_border favorite
GYS - EASYMIG 160 | Inverter Multi-Process Welding Machine

Supplier stock

Gys

Reference: 032255

GYS - EASYMIG 160 | Inverter Multi-Process Welding Machine
(2 reviews)

€680.63

562,50 € tax excl.

or 4 x 170,16 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminium for occasional use
MIG duty cycle: 160A@ 20%-40°C
MMA duty cycle: 140A@ 20%-40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Anti-sticking function
2-roller wire feeder for Ø 100 mm (1 kg) or Ø 200 mm (5 kg) spool
Removable 150A MAG torch 2.20 m
Digital interface and very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 40 x 20 x 33 cm - 10 kg

Supplied with:
- 1 earth clamp + 16 mm² cable length 1.6 m
- 1 MIG/MAG torch length 2.20 m fitted with a contact tip for steel wire Ø 0.8 mm
- 1 reversible roller for solid wire Ø 0.8 and gasless 0.9 mm
- 1 electrode holder + 16 mm² cable length 1.6 m
- 1 no-gas nozzle + 1 contact tip for flux-cored wire Ø 0.9 mm
- 1 gas hose for refillable cylinder length 1 m
- 1 wrench to loosen contact tips

favorite_border favorite
GYS - MULTIWELD 180M-C | Multi-process welding machine
Save 10%

In stock

Gys

Reference: 078727

GYS - MULTIWELD 180M-C | Multi-process welding machine
(3 reviews)

€791.54

€879.49

654,17 € tax excl.

or 4 x 197,89 €

Free delivery

2-year warranty

Multi-process welding machine for professionals
Welds steel, stainless steel and aluminum up to 3mm thick
MIG duty cycle: 110A@ 60%-40°C
MMA duty cycle: 100A@ 60%-40°C
Current range: 20 to 150A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.6 to 0.9 mm)
- MMA (electrode Ø 1.6 to 3.2 mm) with Anti-Sticking function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable MAG torch 150A 3m
Digital interface with very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 53 x 28 x 45 cm - 16.5 kg

Delivered with:
1x 150A 3m torch
1x 2m 16mm² earth clamp
1x 2m 16mm² electrode holder
1 gas hose 1m + 2 hose clamps
1 contact tip wrench
1 contact tip 0.9 + nozzle for gasless wire

favorite_border favorite
LINCOLN - Inverter multi-process welding machine SPEEDTEC 180 C without torch K1409
Save 5%

In stock

Lincoln Electric

Reference: K14098-1

LINCOLN - Inverter multi-process welding machine SPEEDTEC 180 C without torch K1409
(1 review)

€1,311.15

€1,380.16

1 083,60 € tax excl.

or 4 x 327,79 €

Free delivery

2-year warranty

This Inverter technology machine Lincoln Speedtec 180C allows you to weld using 2 processes: MMA-MIG-MAG 

It allows welding with rutile and basic electrodes (stainless steel - cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)

It operates on a 16 A or 25 A - 230 V domestic outlet depending on the amperage setting.

Its adjustment range is 20 to 200 A for MIG-MAG welding and 20 to 160 A for MMA welding.
Easy polarity reversal to allow the use of flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.

It features the following devices:

PFC (power factor corrector) It can be used with a 100 m extension cord without any power loss.
The power supply can be provided from a generator.

HOT START adjustable, which reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc ignition and penetration.

ARC FORCE adjustable, which maintains constant amperage regardless of arc length.

ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.

Its advantages:

The high duty cycle of this machine guarantees use without premature triggering of the thermal protection system.

 

This machine is delivered with:
1 power cable 2 m
1 gas hose 2 m
1 ground cable 3 m
1 set of rollers Ø 0.8 and 1 mm for steel welding wire
 

favorite_border favorite
GYS MULTIPEARL 211-4 welding machine
Save 10%

In stock

Gys

Reference: 065116

GYS MULTIPEARL 211-4 welding machine
(10 reviews)

€1,502.42

€1,669.35

1 241,67 € tax excl.

or 4 x 375,61 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Gas cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 41 x 72 x 77 cm - 27kg
IP21 rating

Supplied with:
1 x 250 A torch 3m MB25
1 x 200 A earth clamp 2.5 m
1 x MMA electrode holder 2 m
2x 0.8 / 1.0 drive rolls

TIG torch optional

favorite_border favorite
GYS MULTIPEARL 210-2 Welding Machine

Supplier stock

Gys

Reference: 065093

GYS MULTIPEARL 210-2 Welding Machine
(5 reviews)

€1,361.25

1 125,00 € tax excl.

or 4 x 340,31 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
2 drive rolls for spool Ø 100 mm (1 kg) or Ø 200 mm (5kg)
Removable MAG torch 250A (2T/4T) 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator
Single-phase 230 V - 16 A power supply
Dimensions: 25 x 45 x 35 cm - 16kg
IP21 rating

Supplied with:
1 x 250 A steel torch 3m MB25
1 x 200 A earth clamp 2.5m
1 x MMA electrode holder 2m
1x 0.8/1 mm drive rolls

TIG torch optional

favorite_border favorite
ESAB - REBEL EMP215ic | Multi-process inverter welder

Supplier stock

ESAB

Reference: 0700300985

ESAB - REBEL EMP215ic | Multi-process inverter welder

€2,414.95

1 995,83 € tax excl.

or 4 x 603,74 €

Free delivery

2-year warranty

This multi-process unit allows you to weld: MIG-MAG including flux-cored wire, MMA, and DC TIG 

The sMIG ("smart MIG") function allows the system to "learn" and constantly adapt to the operator's welding technique to deliver a stable, reproducible arc 

The innovative user interface with large TFT screen offers a clear view of welding parameters and settings

Unique industrial design with five-handle protection cage and monobloc steel structure housed in a light and highly mobile unit; full three-year warranty

Supplied ready to weld with the following consumables and accessories:

• ESAB MXL 200 MIG torch, 3 m
• M6 contact tip for 0.8 mm wire (qty 2)
• M6 contact tip for 1.0 mm wire (qty 2)
• Gas hose, 4.5 m, quick connector
• Electrode holder + 3 m cable
• Earth clamp + 3 m cable
• Steel wire spool Ø0.8 mm weighing 5 kg
• Reversible drive roll for 0.6/0.8 mm steel wire (installed in the drive system)
• Reversible drive roll for 0.8/1.0 mm steel wire
• 0.6 mm – 0.8 mm wire liner (installed in the MIG torch)
• 3 m power cable, fitted with plug
• Safety manual
• USB user manual

Optional: SR17 TIG torch

favorite_border favorite
GYS MULTIPEARL 210-4 XL Welding Machine
Save 10%

In stock

Gys

Reference: 065109

GYS MULTIPEARL 210-4 XL Welding Machine
(16 reviews)

€1,265.45

€1,406.06

1 045,83 € tax excl.

or 4 x 316,36 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating

Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls

TIG torch optional

favorite_border favorite
TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
Save 7%

In stock

Telwin

Reference: 816232

TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
(32 reviews)

€1,018.58

€1,095.24

841,83 € tax excl.

or 4 x 254,65 €

Free delivery

2-year warranty

This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.

This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)

MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.

Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.

This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option. 

Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder

TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...

As an option:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.

For connecting the unit to gas, it is recommended to use the 804208 fitting.

 

 

 

favorite_border favorite
GYS - EASYMIG 150 | Inverter Multi-Process Welder

Supplier stock

Gys

Reference: 032248

GYS - EASYMIG 150 | Inverter Multi-Process Welder
(7 reviews)

€529.38

437,50 € tax excl.

or 4 x 132,35 €

Free delivery

2-year warranty

Ideal for craftsmen or home users
Welds steel, stainless steel and aluminum occasionally
Duty cycle: 140A@15% - 40°C
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 mm)
- MMA (electrode Ø 1.6 to 2.5 mm) with Antisticking function
2-roller wire feed for spool Ø 100 mm (1 kg) or Ø 200 mm (5 kg)
Removable MAG torch 150A, 2.20m
Very intuitive interface and settings
Compatible with 8 kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 40 x 20 x 33 cm - 15 kg

Delivered with:
- 1 ground clamp (cable 1.6 m / 16 mm2)
- 1 electrode holder (cable 1.6 m / 16 mm2)
- 1 accessories bag (Contact tip 0.9mm, Gas nozzle, Tightening wrench, Gas hose 1m with 2 clamps)

favorite_border favorite
TELWIN TECHNOMIG 225 DUAL SYNERGIC | Multi-process welder
Save 20%

In stock

Telwin

Reference: 816057

TELWIN TECHNOMIG 225 DUAL SYNERGIC | Multi-process welder
(4 reviews)

€1,053.84

€1,317.30

870,97 € tax excl.

or 4 x 263,46 €

Free delivery

2-year warranty

This tri-process machine allows you to weld in MMA, semi-automatic (MIG-MAG) and TIG mode with a single unit.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic machine has 17 programmed positions. The user simply selects the type of metal and the wire Ø. It is also possible to weld in manual mode by directly adjusting the setting parameters.

This welding machine uses spool wire for welding. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheet metal (automotive body panels, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this machine allows welding of aluminium, stainless steel and steel in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable CU Si3 type wire, it enables welding of HSS, EHS, UHS steels (automotive body panels)

MIG welding under gas shielding requires the use of pure Argon gas for welding aluminium or an Argon + CO² mixture for steel and stainless steel.

Special case: For steel, it is possible not to use gas when using flux-cored wire (this allows, for example, easier outdoor use). In this case the thickness of the steel sheets must not be less than 1 mm without risk of burn-through.

This machine uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). Optionally, an adapter for Ø 100 mm spools is available.

Upon delivery this machine includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless wire Ø 0.6 and 0.8 mm.
1 steel/stainless contact tip Ø 0.8 mm
1 gas hose for refillable cylinder length 1 m

TIG welding under gas shielding requires the use of pure Argon gas for welding steel, stainless steel, ferrous alloys and copper....

Optional:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes of Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch with a length of 4 m in order to weld in TIG mode using pure Argon shielding gas.

 

 

 

favorite_border favorite
SOUDEXPERT - PROMIG Multiprocess Welding Machine 180A
Save 20%

In stock

Soudexpert

Reference: 275603

SOUDEXPERT - PROMIG Multiprocess Welding Machine 180A

€398.29

€497.87

329,17 € tax excl.

or 4 x 99,57 €

Free delivery

2-year warranty

MIG Welding - WITH AND WITHOUT GAS -
Welds wire Ø 0.8 and 1mm
3 processes: MIG-MAG, MMA and TIG Lift
Uses 1kg (Ø100mm) and 5kg (Ø200mm) spools
Synergy function
LCD screen for very intuitive adjustment
Open circuit voltage: 62V
Power: 50-180A - 6 kVA
Weight (9.5kg)
Single-phase 230 V - 16 A power supply
Compact size and carrying handle
2-year warranty
Dimensions: 49x22x37cm

Delivered with:
1 Electrode holder + 16 mm² cable 3 meters long + 1 Ground clamp + 16 mm² cable 3 meters long
MIG torch 2 meters long, 0.8 and 1.00mm roller
1.5-meter power cable

favorite_border favorite
TELWIN - TECHNOMIG 260 DUAL SYNERGIC | Multi-process welding machine

In stock

Telwin

Reference: 816056

TELWIN - TECHNOMIG 260 DUAL SYNERGIC | Multi-process welding machine
(1 review)

€1,289.65

1 065,83 € tax excl.

or 4 x 322,41 €

Free delivery

2-year warranty

The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.

It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences

One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.

ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding

Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m

For connecting the machine to gas, it is recommended to use fitting 804208.

favorite_border favorite
LINCOLN - Inverter Multi-Process Welder SPEEDTEC 200C Without Torch K14099
Save 10%

Supplier stock

Lincoln Electric

Reference: K14099-1

LINCOLN - Inverter Multi-Process Welder SPEEDTEC 200C Without Torch K14099
(25 reviews)

€1,608.29

€1,786.99

1 329,17 € tax excl.

or 4 x 402,07 €

Free delivery

2-year warranty

This Lincoln Speedtec 200C Inverter Synergic technology unit allows you to weld using 3 processes: MMA, MIG-MAG and TIG

It allows welding with rutile and basic electrodes (stainless steel – cast iron, etc.) of Ø 1.6 to 4 mm (electrode holder not included)

It is also possible to add a TIG welding torch as an option. In TIG mode, this unit cannot weld aluminium.

It operates on a standard 16 A – 230 V household outlet.

Its adjustment range is 20 to 200 A in MIG-MAG mode and 20 to 160 A in MMA or TIG mode
Easy polarity reversal to use flux-cored wire (gasless) of Ø 0.9 and 1.2 mm.

It features the following devices:

PFC (power factor corrector) It can be used with a 100 m extension cord without any loss of power.
The power supply can be provided from a generator.

HOT START adjustable, reduces the risk of sticking when the electrode and workpiece are cold, also facilitates arc striking and penetration.

ARC FORCE adjustable, maintaining constant amperage regardless of arc length.

ANTI-STICKING reduces the risk of the electrode sticking to the workpiece.

Its advantages:

The high duty cycle of this unit guarantees operation without premature triggering of the thermal protection system.

This unit is delivered with the sale with:
1 x 2 m power cable
1 x 2 m gas hose
1 x 3 m ground cable
1 set of Ø 0.8 and 1 mm drive rollers for steel welding wire