Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
- -10%
kemppi minarcmig evo 200 torch length 3M
Reference: GC223GMIM3C
kemppi minarcmig evo 200 torch
€308.10
€277.29
229,17 € tax excl.
Supplier stock
Dispatched within 5 to 7 days
kemppi minarcmig evo 200 torch length 3M
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Gys
Reference: GYS-GAL1A-FLUX
(13 reviews)
€23.15
19,13 € tax excl.
Fast delivery
2-year warranty
Reversible drive roll for GYS MIG-MAG welder for flux-cored wire, available in the following diameters:
0.8 mm solid wire / 0.9 mm flux-cored wire
0.9 / 1.2 mm flux-cored wire
0.6 / 0.9 mm flux-cored wire
Compatible with GYS welding machines:
Smartmig 142 - 152 - 162 - 182 - 183 - 3P
Easymig 150 - 160 - 160XL
Multipearl 200-2
Multiweld
Monogys 200-2CS
In stock
SILICONI
Reference: MOLISIL
(2 reviews)
€9.03
7,46 € tax excl.
Fast delivery
2-year warranty
MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.
500 ml aerosol can
INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.
SPECIFICATIONS
Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE
In stock
Lincoln Electric
Reference: KP10441
(17 reviews)
€9.17
7,58 € tax excl.
Fast delivery
2-year warranty
10 contact tips for steel or stainless steel welding designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E
M6 thread Length 28 mm.
3 diameters available: 0.8 - 1 and 1.2 mm.
In stock
Trafimet
Reference: MT0580
(1 review)
€29.68
24,53 € tax excl.
Fast delivery
2-year warranty
Compatible with any MB15 type torch, this kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
10 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 nozzle springs
2 gas nozzles Ø 12 mm - Length 53 mm
In stock
Telwin
Reference: 722167 TELW-GAL2-ALU
(1 review)
€39.72
32,83 € tax excl.
Fast delivery
2-year warranty
2 double-groove rollers for Telwin welding machine for aluminum wires, available for wire diameters: 0.8 / 1 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 240 - 260
ELECTROMIG 281/2 Turbo -300 SYN. - 230 - 330 WAVE -400 - 450 SYNERGIC - 300 Synergic - 430 WAVE - 550 SYNERGIC -
MASTERMIG 270/2 - 300 - 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK -630 MIG PACK -
INVERSEPULSE 60.30 - 60.40
In stock
Lincoln Electric
Reference: LINCOLN-GALET
(10 reviews)
€35.30
29,17 € tax excl.
Fast delivery
2-year warranty
4 drive rolls available depending on the Ø and type of welding wire:
For solid steel or stainless steel wire Ø 0.8 / 1 mm (Lincoln reference KP14016-1.0)
For solid steel or stainless steel wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2)
For solid aluminium wire Ø 1 / 1.2 mm (Lincoln reference KP14016-1.2A)
For flux-cored wire Ø 0.9 / 1.2 mm (Lincoln reference KP14016-1.1R)
The drive roll is reversible; with one roll you have two possible welding wire diameters.
These drive rolls fit the following Lincoln welders:
Speedtec 180-200-215 C
POWERTEC 161C-191C-213C-271C
In stock
SILICONI
Reference: CLINOX GREEN
€10.03
8,29 € tax excl.
Fast delivery
2-year warranty
CLINOX Green is a cleaner for stainless steel and chrome surfaces.
CLINOX Green is an innovative product as it contains biodegradable detergents free of hexane and chlorinated compounds, with high detergent power. Furthermore, its formula is highly concentrated in active ingredients, with a reduced propellant content.
It removes rings, grease, oils, and dirt, and leaves a protective film that reduces future scratches and protects machines from stains, dust, marks, and corrosion.
It does not scratch or stain. It contains no substances that could damage, stain, or harm treated surfaces.
CLINOX Green cleans stainless steel surfaces on industrial equipment, kitchens, refrigerators, doors, countertops. Biodegradable. Eco-compatible
500 ml aerosol
DIRECTIONS FOR USE
Shake the dispenser before use.
Spray the product onto a dry cloth and clean the surfaces
SPECIFICATIONS
Base: Biodegradable cleaner
Propellant: Mixture of denatured, odorless and non-toxic propellants
Appearance: White liquid
pH: 6 - 8
Keep away from heat sources and out of direct sunlight.
Store in a dry place at temperatures between +5°C and +35°C.
Shelf life: 12 months
In stock
Soudure pro
Reference: VIP
€29.24
24,17 € tax excl.
Fast delivery
2-year warranty
This carrying case allows you to store your welding machine.
Its dimensions:
Length: 44 cm - Width 33 cm - Height 18.6 cm
It is lined with foam to provide additional protection for your welding machine
In stock
Telwin
Reference: 804031
€29.25
24,17 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866
In stock
Weldline
Reference: W000260682
€213.77
176,67 € tax excl.
or 3 x 71,26 €
Free delivery
2-year warranty
This Lincoln kit includes:
1 Electrode holder 400 Amperes @35% Segura 600 + cable 50 mm² length 4 m and 35/70 connector
1 Ground clamp 400 Amperes @35% Hippo 600 + cable 50 mm² length 4 m and 35/70 connector
In stock
BINZEL
Reference: 087521
(10 reviews)
€186.55
154,17 € tax excl.
or 3 x 62,18 €
Free delivery
2-year warranty
This GYS TIG PRO 17 brand torch features a EURO connector for connection to your welding machine.
Length 4 M.
Air cooling.
Duty cycle 100A@35%
This torch is compatible in particular with the 3 models of Gys Multipearl welding machines that we sell on our website.
Advantage of this Euro connection torch:
Compared to the TIG SR 17 torch with Gys valve reference W000278880 also compatible with the Gys Multipearl welding machine.
Post-gas with adjustable duration.
This parameter defines the time during which the gas continues to flow after the arc is extinguished. It protects the workpiece and the electrode from oxidation.
Arc fade-out with adjustable duration
This corresponds, at the end of welding, to the time required for the progressive reduction of the welding current until the arc stops. This function prevents cracks and end-of-weld craters. By default, this function is set to 0 sec.
In stock
Trafimet
Reference: EA030
(11 reviews)
€9.66
7,98 € tax excl.
Fast delivery
2-year warranty
5 Springs for MIG-MAG torch swan neck
Depending on the type of your torch (MB15 or MB25), you will need to choose one of the two available references
In stock
Soudexpert
Reference: TIG308L325
€75.63
62,50 € tax excl.
Fast delivery
2-year warranty
TIG STAINLESS STEEL 308L filler rods
Diameter: 3.2 mm
Rod length: 1 metre
5 kg sleeve
5 kg equals +/- 75 rods
Requires use of welding gas (pure Argon)
Ideal for DC welding of austenitic stainless steels type 304/304L/347/321.
Standards: AWS A5.9- ER308L - EN 12072 - W19.9L
Applications:
- Piping
- Tubes and tanks in petrochemistry
In stock
Lincoln Electric
Reference: W000011139
(2 reviews)
€166.38
137,50 € tax excl.
or 3 x 55,46 €
Free delivery
2-year warranty
This 35C50 kit includes:
1 SEGURA 300 electrode holder + 35 mm² cable 4 m long
1 Hippo 400 earth clamp + 35 mm² earth cable 4 m long
Conductor diameter 13 mm
Duty cycle 300A@35%
In stock
Telwin
Reference: Crystal
(1 review)
€27.18
22,46 € tax excl.
Fast delivery
2-year warranty
This transparent nozzle is compatible with TIG torches of type 17-18 and 26
2 electrode holder diameters available: 1.6 or 2.4 mm
Tungsten electrode not included
Supplier stock
Telwin
Reference: 742576 TELW-GAL2-ACIER
(1 review)
€14.62
12,08 € tax excl.
Fast delivery
2-year warranty
2 double-groove rollers for Telwin MIG-MAG welding machine for steel or stainless steel wire, available for wire diameters: 0.6 / 0.8 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 223 TREO 240 - 260
ELECTROMIG 230 - 300 Synergic - 330 Wave - 430 WAVE - 550 SYNERGIC - 281/2 Turbo - 400 - 450 SYNERGIC -
MASTERMIG 270/2 - 300 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK
INVERPULSE 60.30- 60.40
kemppi minarcmig evo 200 torch length 3M