SILICONI | Cold galvanizing ZINCOSIL 400

ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.

500 ml aerosol

PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.

Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free

Reference: ZINCOSIL 400

SILICONI |ZINCOSIL 400 Cold galvanizing colorless

Name: SILICONI |ZINCOSIL 400 Cold galvanizing colorless
Brand: SILICONI
SKU: ZINCOSIL 400
Price: 8.82 EUR
Availability: InStock

By purchasing this product you will earn 0.15 € thanks to our loyalty program. Your cart will total 0.15 €.

€8.82

7,29 € tax excl.

In stock

Shipping within 24h

Delivery in 24-48h

A question about this product? Description

500 ml aerosol

PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing

Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free

By purchasing this product you will earn 0.15 € thanks to our loyalty program. Your cart will total 0.15 €.

100% secure payment in 2, 3, 4 or 10 instalments by credit card or PayPal

A question about this product?

Reviews

Expert advice for professionals and individuals

Benefit from the support of specialists, whatever your profile.

Secure payment

Your transactions are protected by the latest security technologies.

Express delivery in 24/48 h

Fast dispatch to France, Europe and overseas territories upon confirmation of your order.

Best price guaranteed

Enjoy the most competitive prices on the market all year round.

16 other products in the same category:

Jelt

Reference: 5418

BIO Cutting Oil + Jelt

(4 reviews)

€14.51

11,99 € tax excl.

Fast delivery

2-year warranty

Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.

Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.

In stock

Gys

Reference: WS3915G

WS 3915G Cooling Liquid

(2 reviews)

€67.55

55,83 € tax excl.

Fast delivery

2-year warranty

Special welding coolant is essential for optimizing and preserving the performance of your spot welder's cooling system, and is also suitable for other welding processes. Its unique formula, anti-corrosive and low-conductivity, reduces the effects of electrolysis. The special welding coolant prevents the build-up of deposits and blockage of the cooling circuit compared to a standard coolant.

Its advantages:

1) Its low conductivity limits the risk of electrolysis in the cooling circuit and prevents deposits responsible for blockages in the cooling circuit.
2) Anti-corrosive in contact with heavy metals.
3) Frost-resistant down to -20°C, for operation even in the most demanding conditions.
4) Its ready-to-use formula can be used pure without any dilution.

Available in two packaging sizes of 5 or 10 litres

DBP |Acid-resistant brush for stainless steel passivation, wooden handle

dbp

Reference: MATTRA127

DBP |Acid-resistant brush for stainless steel passivation, wooden handle

€12.80

10,58 € tax excl.

Fast delivery

2-year warranty

This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

In stock

Telwin

Reference: 804139

NEUTRALISE IT 1L can

(1 review)

€26.72

22,08 € tax excl.

Fast delivery

2-year warranty

Stainless steel weld cleaning liquid for small weld beads
1 L can.
Applied with a suitable brush. Reference 981863

In stock

SILICONI

Reference: PENTRIX 100

SILICONI | PENTRIX 100 - Crack detector

(1 review)

€13.61

11,25 € tax excl.

Fast delivery

2-year warranty

PENTRIX 100 is a red penetrant liquid in aerosol form, formulated to reveal cracks, crazes or porosity caused by welding on ferrous materials and other metals.
Thanks to its intense colour and composition, PENTRIX can penetrate the most complex areas and reveal cracks and crazes caused by welding.

400 ml aerosol

INSTRUCTIONS FOR USE
Shake well before use.
1. Degrease and clean the surface to be treated with METACLEAN aerosol degreaser;
2. Spray PENTRIX 100 on the parts to be inspected;
3. Wait 10 to 70 minutes for the product to fully penetrate.
4. Clean the treated surfaces with water or solvent. Do not spray solvent aerosol directly onto treated surfaces as this could remove all of the red liquid.

CHARACTERISTICS
Base: Mixture of petroleum distillates, dyes and surface tension protectors.
Appearance: Red liquid
Propellant: Denatured hydrocarbon, non-toxic and odourless
CFC-FREE

In stock

Telwin

Reference: 802976

Telwin - Coolant Liquid for MIG or TIG Torch

€75.63

62,50 € tax excl.

Fast delivery

2-year warranty

Coolant liquid for MIG-MAG or TIG torch cooling system 5L container

In stock

Weldline

Reference: PICKLINOX- GEL

WELDLINE - PICKLINOX- GEL Stainless steel pickling agent

(4 reviews)

€24.71

20,42 € tax excl.

Fast delivery

2-year warranty

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg tubs in gel form

Pickling is the operation that removes all oxides after welding, by removing the surface depleted as a result of heat treatment.
It is the most important step in the treatment process.
It must be taken into account that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not simply mean cleaning the weld beads but primarily consists of restoring the stainless steel's characteristics.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable time depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

In stock

Lincoln Electric

Reference: W000010167

Lincoln Freezcool Welding Coolant

€149.23

123,33 € tax excl.

Free delivery

2-year warranty

The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.

Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches

Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.

Supplied in a 9.6 L container

In stock

Weldline

Reference: CERASKIN

WELDLINE - Anti-spatter spray CERASKIN W000277679

(4 reviews)

€32.27

26,67 € tax excl.

Fast delivery

2-year warranty

Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.

Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film

Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product

In stock

Weldline

Reference: PICKINOX-P

WELDLINE -PICKLINOX- PASTE Stainless Steel Pickling Agent

(4 reviews)

€23.69

19,58 € tax excl.

Fast delivery

2-year warranty

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg jars in paste form

Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

In stock

Telwin

Reference: 804031

CLEAN IT 1L container

€29.25

24,17 € tax excl.

Fast delivery

2-year warranty

Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866

In stock

SILICONI

Reference: ANTITEK

SILICONI | ANTITEK anti-spatter welding

(2 reviews)

€6.56

5,42 € tax excl.

Fast delivery

2-year warranty

ANTITEK® is a new generation water-based anti-spatter aerosol, harmless to users. Thanks to its composition, silicone-free and with selected raw materials, ANTITEK® allows subsequent and successive surface treatments (painting, galvanizing or chrome treatment)
ANTITEK® is used to prevent the adhesion of impurities or spatter on welded elements or on the wear parts of welding torches.

500 ml aerosol

INSTRUCTIONS FOR USE
Spray around the end of the torch or on the metal to be welded or cut.
Do not spray on welding strips.
Shake before use.
Apply a first burst into the air when the aerosol is new.
Spray at a distance of 25-30 cm from the parts to create a film that will prevent spatter. Do not spray too long, or closer than 25 cm from the part.
Do not spray an excessive amount of product.
Degrease the welded part with detergent products before proceeding with surface treatments.
Use-by date: 10 months from the production date indicated on the aerosol.

CHARACTERISTICS
Base: Synthetic oil mixed with water base. SILICONE-FREE.
Propellant: Mixed, denatured, non-toxic, ecological gas.
Appearance: Clear liquid
Viscosity at 25°C: 20-50 cst
Odor: None
Anti-spatter performance: Very good

In stock

Telwin

Reference: 981866

Cleaning pad kit

€40.23

33,25 € tax excl.

Fast delivery

2-year warranty

Cleaning pad kit for Cleantech 200 Telwin
This item is used when cleaning with the CLEAN IT cleaner
These pads are suitable for cleaning large weld beads

In stock

SILICONI

Reference: RIVELEX 200

SILICONI | RIVELEX 200 - Porosity or crack detector

(1 review)

€10.59

8,75 € tax excl.

Fast delivery

2-year warranty

RIVELEX 200 is an aerosol product for detecting cracks or porosity caused by welding in all types of materials. Thanks to its composition, RIVELEX 200 can be applied very quickly, as it contains fast-evaporating solvents that leave a white powder on treated surfaces, enabling crack detection.
It can be used with red and fluorescent penetrants (PENTRIX 100).

400 ml aerosol

INSTRUCTIONS FOR USE
Shake the aerosol for at least one minute before use.
Spray RIVELEX 200 at a distance of approximately 20 to 30 cm onto the part that has been previously treated with a liquid penetrant.
Wait 10 to 20 minutes for the product to be fully effective.
Then inspect the treated materials.
This product causes no damage to treated materials.
The bases used comply with the regulations, ASME 2644 type II; MIL-I-25135 form D type II..

CHARACTERISTICS
Base: Mixture of solvents and white powders
Propellant: Denatured hydrocarbon, odorless
Appearance: White liquid
CFC-FREE

In stock

SILICONI

Reference: SUPER BALL

SILICONI | SUPER BALL - Gas leak detector

€5.00

4,13 € tax excl.

Fast delivery

2-year warranty

SUPER BALL is the best method for finding a gas leak on pressurized parts. Bubbles appear at the location of the leak. It can be used on all gases, even at low pressure (nitrogen, carbon dioxide, refrigeration systems).
Thanks to its formulation with specially selected components, it reveals micro-leaks on low surface tension surfaces

500 ml aerosol

INSTRUCTIONS FOR USE
Shake the aerosol well before use.
Spray the product from a distance of 10 cm;
For professional use only

CHARACTERISTICS
Base: Mixture of foaming components
Propellant: Denatured and odorless hydrocarbon
Appearance: White foamy liquid
Application temperature: -10°C to +130°C (approximately)
Biodegradability: Greater than 80%
Odor: None
CFC-FREE, non-toxic

In stock

SILICONI

Reference: SUPER CLEANER

SILICONI | SUPER CLEANER - Detergent for oil, grease, dirt and sludge

€9.58

7,92 € tax excl.

Fast delivery

2-year warranty

SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.

Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.

750 ml spray bottle

It cleans without leaving greasy residues.

Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.

SUPER CLEANER reduces the adhesion of dirt on treated surfaces.

✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive

INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.

CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%