Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Sweden
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.
Reference: 260090
Flow meter for MIG-MAG semi-automatic welding torch
€20.06
16,58 € tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.
Customer reviews
Product reviews
-
Order placed Monday package received Wednesday perfect
-
Accessory ok
-
Ideal for good gas pressure regulation
-
Good
-
Essential to be sure of your gas flow!
-
I haven't used it yet
-
Well RAS
-
Quality product
-
Top
-
good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
Supplier stock
Telwin
Reference: 804028
€88.73
73,33 € tax excl.
Fast delivery
2-year warranty
Marking kit for Cleantech 200 Telwin
Save 10%
In stock
Trafimet
Reference: lot 010341
(32 reviews)
€11.26
€12.51
9,31 € tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
In stock
Weldline
Reference: RESTORINOX-G
(2 reviews)
€24.20
20,00 € tax excl.
Fast delivery
2-year warranty
Final treatment phase to restore the stainless property of steel
Available in 2 and 10 kg pots in gel form
This is the final phase of the entire process, necessary to restore the stainless property of steel.
This removes contamination from the surface of stainless steel after various work phases and thus regenerates the oxide layer that gives stainless steel its properties.
In fact, this work phase recreates the chrome layer damaged by heat, while reducing the spontaneous oxidation time.
Through this process, the oxide layer that protects against external agents is restored.
How to use RESTORINOX?
First, degrease and pickle the area to be treated with the specific products CLEANOX and PICKLINOX. Then apply the product.
Rest times will vary from 20 to 60 minutes.
At the end of the treatment, rinse the product with water. Do not expose the product or the treated surface to sunlight or any atmospheric agent.
Save 10%
In stock
StrongHandTools
Reference: TDQ612075-K1
(6 reviews)
€2,253.62
€2,504.02
1 862,50 € tax excl.
or 4 x 563,41 €
Free delivery
2-year warranty
Table top dimensions 1200 x 750 mm. Height 910mm
The table top nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Top thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted weight: 680 kg
Lockable casters + leveling feet for mobile or stationary use
Delivered with accessories.
Optional: Plasma cutting top
The plasma cutting top supports 45 kg, over a450 x 710 mm cutting surface with 14 reversible slats.
The generous width of 45 mm between the cutting blades provides sufficient space for clamping the blank holder.
The blades remain in place when the top is folded.
Cut, clamp and fasten at a single convenient mobile workstation at an ideal and uniform working height.
Save 10%
In stock
AEG Powertools
Reference: 4935412266
(1 review)
€221.21
€245.79
182,82 € tax excl.
or 3 x 73,74 €
Free delivery
2-year warranty
. 1200 W motor
. Electronic speed controller to adapt speed to materials
. Torque and speed optimised for polishing work
. Auto-stop carbon brushes, easily accessible
. "Full-hand" trigger
. Spindle lock
. Ergonomic design with two-handed grip for intensive work
. Supplied with a side handle, 4m cable, sanding pad and gearbox protection kit
Supplier stock
StrongHandTools
Reference: TBHKM100
(4 reviews)
€604.00
499,17 € tax excl.
or 4 x 151,00 €
Free delivery
2-year warranty
Table top dimensions 900 x 600 mm
2 possible working heights:
To be placed on your workbench or work surface: leg height 158 mm
Mounting the included removable legs: working height 860 mm
Table top thickness: 4 mm
Hole diameter: 16 mm
Weight: 33 kg
Maximum permitted weight: 680 kg
Delivered with the TBKM1-28 kit, square accessories for welding table including:
4 clamps
4 Magnetic supports
4 positioning stops
4 insertion stops
4 stop bars
4 threaded adapters
Option available: TBKM2-24 kit: Round accessories for welding table (optional)
In stock
SILICONI
Reference: ZINCOSIL 430
€6.81
5,63 € tax excl.
Fast delivery
2-year warranty
ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.
400 ml aerosol
PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.
SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance
Jelt
Reference: 5418
(4 reviews)
€14.51
11,99 € tax excl.
Fast delivery
2-year warranty
Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.
Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.
In stock
Lincoln Electric
Reference: W000010167
€149.23
123,33 € tax excl.
Free delivery
2-year warranty
The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.
Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches
Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.
Supplied in a 9.6 L container
Jelt
Reference: Jelt56
(1 review)
€12.35
10,21 € tax excl.
Fast delivery
2-year warranty
3 products for complementary use:
PENETRANT:
Red dye used to highlight small defects that may cause leaks.
DEVELOPER:
White powder product. It is used in conjunction with the PENETRANT and highlights small defects that may cause leaks.
Its white powder draws out by capillary action the red penetrant embedded in the crack from a thickness of 30 microns.
Easy to apply, non-destructive testing.
CLEANER:
Surface cleaner to be used before and after dye penetrant testing.
Penetrates into the smallest cracks and removes excess PENETRANT.
In stock
Weldline
Reference: NETMIG
(20 reviews)
€11.59
9,58 € tax excl.
Fast delivery
2-year warranty
NETMIG is a paste that prevents welding spatter from adhering to nozzles or contact tips.
Does not clog orifices or threads
Does not cause porosity
Solvent-free, silicone-free and odourless.
Compatible with all MIG-MAG torches except fume extraction torches.
Volume 300g
In stock
Telwin
Reference: BRUSH IT
(4 reviews)
€27.13
22,42 € tax excl.
Fast delivery
2-year warranty
Stainless steel weld cleaning liquid for small weld beads
1 L or 5 L container.
Applied with a suitable brush.
FISCHER-DAREX
Reference: PXJ4
(3 reviews)
€8.02
6,63 € tax excl.
Fast delivery
2-year warranty
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish
In stock
StrongHandTools
Reference: PR
(2 reviews)
€36.25
29,96 € tax excl.
Fast delivery
2-year warranty
Wide-opening locking pliers with articulated tips, suitable for bodywork, assembly, welding and sheet metal work.
| Reference | Length | Opening | Capacity | Weight |
| PR115S | 280 | 100 | 83 | 1 kg |
| PR18S | 450 | 114 | 114 | 1.4 kg |
Measurements expressed in millimetres
In stock
StrongHandTools
Reference: T64216
(1 review)
€8.57
7,08 € tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place
Compatible with any welding table with Ø 16 mm holes
Tube size: 65 mm maximum
SILICONI
Reference: ZINCO 98
(2 reviews)
€8.02
6,63 € tax excl.
Fast delivery
2-year warranty
ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.
400 ml aerosol
INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable
SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C
This flow meter allows you to measure the actual gas flow rate at the nozzle of your welding machine.
It is a tool that helps you save gas while achieving the correct settings.