Plasma Cutter with Integrated Compressor – Purchase & Price | EURO-WELDING

Active filters

Filter by

Brand

Brand

Usage

Usage

By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.

Active filters

favorite_border favorite
EASYCUT 25
Save 10%

In stock

Gys

Reference: 065543

EASYCUT 25
(2 reviews)

€625.17

€694.64

516,67 € tax excl.

or 4 x 156,29 €

Free delivery

2-year warranty

The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.

Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.

Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.

favorite_border favorite
EASYCUT K25
Save 10%

In stock

Gys

Reference: 068063

EASYCUT K25

€902.45

€1,002.73

745,83 € tax excl.

or 4 x 225,61 €

Free delivery

2-year warranty

The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).

Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).

favorite_border favorite
LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
Save 20%

In stock

Lincoln Electric

Reference: K12038-3

LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
(2 reviews)

€1,810.09

€2,262.62

1 495,97 € tax excl.

or 4 x 452,52 €

Free delivery

2-year warranty

The Tomahawk 30 K plasma cutter is the most flexible plasma cutting machine on the market. The machines are delivered ready to use, capable of cutting quickly and precisely.
Powered by single-phase 230V, ideal for on-site work. With this cutter, plasma cutting will no longer be a problem — forget grinding, simply take the torch and cut in just a few seconds.

  • High performance - Innovative electrode and cutting nozzle design.
  • Flexible - a single-phase 230V power supply is sufficient.
  • Robust - long-life integrated compressor or external compressed air supply.
  • Portable 18.5 kg only, small and compact.
  • Cutting of various metals – Unalloyed steel, stainless steel, aluminum and others.

Output current range 15 - 30 A
Duty cycle 30A@60% - 25A@100%

Example of possible cutting thickness for steel:
Recommended cutting thickness: 12 mm
Clean cutting thickness: 16 mm maximum
Separation cutting thickness: 20 mm maximum

thanks to a button on the front of the unit, it can be connected to a compressor.

Delivered with
One LC 30 manual torch, length 4 m - EURO connector
Cable and ground clamp


favorite_border favorite
GYS Cutter 35 KF PFC |GYS Plasma Cutter with integrated compressor
Save 20%

In stock

Gys

Reference: 080768

GYS Cutter 35 KF PFC |GYS Plasma Cutter with integrated compressor
(2 reviews)

€1,406.77

€1,758.46

1 162,64 € tax excl.

or 4 x 351,69 €

Free delivery

2-year warranty

Thanks to its integrated compressor, the EASYCUT K35 PFC plasma cutter allows you to cut metal on any construction site where a single-phase power supply is available.
Its PFC technology allows it to operate from 195 V to 265 V and achieve quality cuts even on 100 m construction site extension cords.
Small, lightweight and easy to transport, it is capable of delivering 35 A of power to cut different types of metals up to 15 mm thick in separation cut.

Automatic air regulation adapted to the TPT 35 torch.
Cuts all steels (mild, stainless, hardened, HSLA), aluminum, copper, etc. and cutting speed higher than Oxy-fuel thermal cutting

Very practical on construction sites thanks to its integrated compressor.
Internal air filter with automatic purge to prevent condensation in the torch.
HF-free ignition that avoids interference that could damage nearby electronic equipment.
Storage compartment for consumables.

Ideal for travel and construction sites

Accepts extension cords up to 100 m.
Reinforced body and anti-shock skids.
Compact and easily movable on site.
Protected against overvoltages up to 400 V (PROTEC 400).
Rated IP23S to withstand harsh environments.
Optimized cooling with a ventilation channel that isolates the electronic components from dust.

Delivered with:
a TPT 35 torch with a length of 4 m
a ground clamp with a 10 mm² cross-section cable, length 2 m
Two nozzles and two electrodes 

favorite_border favorite
TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
Save €89.00

Supplier stock

Telwin

Reference: 816147 + 804416

TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
(1 review)

€1,205.70

€1,294.70

996,45 € tax excl.

or 4 x 301,43 €

Free delivery

2-year warranty

favorite_border favorite
TELWIN Technology 54 XT | Plasma cutter with integrated compressor

In stock

Telwin

Reference: 816147

TELWIN Technology 54 XT | Plasma cutter with integrated compressor
(3 reviews)

€1,204.95

995,83 € tax excl.

or 4 x 301,24 €

Free delivery

2-year warranty

This inverter technology plasma cutter with contact pilot arc ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanised steel, aluminium, copper, brass
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables clean cutting of materials up to 12 mm thick or 15 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) for supports with a maximum thickness of 4 mm
Consumable change indicator device

This cutter is fitted with a warning indicator light for consumable replacement 

Delivered with a 4 m torch + ground clamp and cable 3 m long

Back to top

Frequently asked questions

What compressor is needed for plasma cutting?

A plasma cutter requires a compressor capable of providing the flow rate and pressure indicated by the manufacturer. The air must be clean and dry to preserve the consumables and cut quality.