• -15%
Lincoln Invertec Tomahawk 1538 plasma cutter
Save 15%
  • Lincoln Invertec Tomahawk 1538 plasma cutter

High-performance plasma cutting.

The Lincoln Electric Tomahawk plasma cutting system focuses on three elements:

  • S (Starting) - An innovative and patented arc starting system that preserves and extends electrode service life.
  • P (Performance) - Thanks to a very high-speed helical airflow combined with a special electrode and nozzles designed to concentrate the plasma flow.
  • L (Lifetime) - The optimized airflow cools the electrode and nozzle for extended service life.
  • Performance - Innovative cutting electrode and nozzle design.
  • Service life - The innovative design increases consumable service life.
  • Flexible - Multiple torch configurations.
  • Concentrated plasma flow - Low heat input, less distortion.
  • Cutting of different metals – Mild steel, stainless steel, aluminum and others.

Main Specifications

  • advanced arc starting technology, without High Frequency (HF)
  • innovative electrode and nozzles
  • Improved consumable service life
  • Reduced heat input, less distortion
  • Multiple torch configurations

 Clean cut thickness 40 mm.
Severance cut thickness 45 mm.

Included accessories:
Power cable (3 m)
LC 105 manual torch (7.5 m)
Ground cable and clamp set (6 m)
Air connection kit
Torch consumables parts kit

Your compressor must provide an airflow of 180 liters per minute at a pressure of 5 bar for proper operation of this cutter.

Reference: K12039-1

LINCOLN - Tomahawk 1538 | Invertec plasma cutter

Lincoln Electric
By purchasing this product you will earn 67.66 € thanks to our loyalty program. Your cart will total 67.66 €.
favorite_border favorite
€4,815.97
€4,093.57

3 383,14 € tax excl.

Supplier stock
Dispatched within 5 to 7 days
A question about this product? Characteristics Accessories Description

High-performance plasma cutting.

The Lincoln Electric Tomahawk plasma cutting system focuses on three elements:

  • S (Starting) - An innovative and patented arc starting system that preserves and extends electrode service life.
  • P (Performance) - Thanks to a very high-speed helical airflow combined with a special electrode and nozzles designed to concentrate the plasma flow.
  • L (Lifetime) - The optimized airflow cools the electrode and nozzle for extended service life.
  • Performance - Innovative cutting electrode and nozzle design.
  • Service life - The innovative design increases consumable service life.
  • Flexible - Multiple torch configurations.
  • Concentrated plasma flow - Low heat input, less distortion.
  • Cutting of different metals – Mild steel, stainless steel, aluminum and others.

Main Specifications

  • advanced arc starting technology, without High Frequency (HF)
  • innovative electrode and nozzles
  • Improved consumable service life
  • Reduced heat input, less distortion
  • Multiple torch configurations

 Clean cut thickness 40 mm.
Severance cut thickness 45 mm.

Included accessories:
Power cable (3 m)
LC 105 manual torch (7.5 m)
Ground cable and clamp set (6 m)
Air connection kit
Torch consumables parts kit

Your compressor must provide an airflow of 180 liters per minute at a pressure of 5 bar for proper operation of this cutter.

By purchasing this product you will earn 67.66 € thanks to our loyalty program. Your cart will total 67.66 €.

100% secure payment in 2, 3, 4 or 10 instalments by credit card or PayPal
Secure payment methods
Expert after-sales service
Authorised Euro Welding dealer
A question about this product?

Characteristics of LINCOLN - Tomahawk 1538 | Invertec plasma cutter

Fuse (in Amperes) 32 A Duty cycle at 40° of the plasma cutter 60A @100%- 100A@40 %
Cutting current 20 - 100 A Warranty 3 years
Dimensions (in mm) 405 x 301 x 640 Weight in kg 36

Expert advice for professionals and individuals

Benefit from the support of specialists, whatever your profile.

Secure payment

Your transactions are protected by the latest security technologies.

Express delivery in 24/48 h

Fast dispatch to France, Europe and overseas territories upon confirmation of your order.

Best price guaranteed

Enjoy the most competitive prices on the market all year round.

16 other products in the same category:

favorite_border favorite
Lincoln - Plasma Cutter TOMAHAWK 45
Save 5%

Supplier stock

Lincoln Electric

Reference: K14391-1

Lincoln - Plasma Cutter TOMAHAWK 45

€1,805.83

€1,900.87

1 492,45 € tax excl.

or 4 x 451,46 €

Free delivery

2-year warranty

The Tomahawk 45 plasma cutter is light enough to be transported to any job site — simply connect the compressed air and start cutting immediately.
Ideal for maintenance work, small-scale fabrication (e.g. ventilation duct installation), demolition work..

  • High performance - Innovative electrode and cutting nozzle design.
  • Flexible - a single-phase 230V power supply is sufficient.
  • Contact cutting device Reliable plasma arc ignition without high frequency.
  • Enhanced safety: The parts-in-place system detects correct installation of torch consumables
  • Cutting of various metals – Unalloyed steel, stainless steel, aluminium and others.
    Power supply from a generator is possible 

Output current range 15 - 45 A
Duty cycle 40A@60% - 45A@145% - 30A@100%

Example of possible cutting thickness for steel:
Recommended cutting thickness: 16 mm
Clean cutting thickness: 20 mm maximum
Severance cutting thickness: 25 mm maximum

Supplied with

One manual torch length 6 m - EURO connector
Cable and ground clamp


favorite_border favorite
Telwin Technology 60 XT plasma cutter
Save 10%

In stock

Telwin

Reference: 816148

Telwin Technology 60 XT plasma cutter
(2 reviews)

€1,204.96

€1,338.84

995,83 € tax excl.

or 4 x 301,24 €

Free delivery

2-year warranty

This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device

The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.

This cutter is equipped with a warning indicator light for consumable replacement 

Supplied with a 4 m torch + ground clamp and 3 m cable

favorite_border favorite
EASYCUT K25
Save 10%

In stock

Gys

Reference: 068063

EASYCUT K25

€902.45

€1,002.73

745,83 € tax excl.

or 4 x 225,61 €

Free delivery

2-year warranty

The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).

Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).

favorite_border favorite
ESAB Cutmaster 50+

Supplier stock

ESAB

Reference: 0559150004

ESAB Cutmaster 50+

€3,014.92

2 491,67 € tax excl.

or 4 x 753,73 €

Free delivery

2-year warranty

The Cutmaster 50+ plasma cutter is the ideal combination of power and portability for portable plasma cutting machines.
Portable and durable with its three handles and a lightweight, industrial, weather-resistant enclosure. The bright 10.9 cm (4.3-inch) TFT LCD screen with a glove-compatible adjustment knob simplifies use and allows for increased control and flexibility. 

favorite_border favorite
ESAB Cutmaster 30+

Supplier stock

ESAB

Reference: 0559130004

ESAB Cutmaster 30+

€1,650.32

1 363,90 € tax excl.

or 4 x 412,58 €

Free delivery

2-year warranty

The Cutmaster 30+ combines power and portability, offering a high-performance solution for plasma cutting. Its 4.3" TFT LCD screen and enhanced features ensure precise control and increased flexibility for clean cuts up to 10 mm. Equipped with the SL60 1Torch, you get the complete plasma cutting package.

Recommended piercing and cutting capacity: 10 mm

Maximum edge cutting capacity: 16 mm

Key features:

  • Portable and durable with three handles and an industrial, lightweight, weather-resistant enclosure
  • Bright 4.3" TFT LCD screen with glove-friendly adjustment knob to simplify use and provide increased control and flexibility
  • Dual input 120-240 V, single-phase power supply with automatic voltage detection that defines the maximum output amperage
  • Equipped with an SL60 1Torch industrial torch with 2T/4T function, safety trigger lock and dual-pressure trigger to preserve bottled air
  • Switching between normal cutting and grid cutting modes
  • Automatic air pressure detection and post-cut air purge to extend consumable life
  • Duty cycle of 40% at 30 A (120V) 100% at 20 A (120V)
  • Cutmaster Black Series consumables included for up to 60% longer service life
  • 3-year warranty on the power supply and 1-year warranty on the torch and cables
favorite_border favorite
EASYCUT 25
Save 10%

In stock

Gys

Reference: 065543

EASYCUT 25
(2 reviews)

€625.17

€694.64

516,67 € tax excl.

or 4 x 156,29 €

Free delivery

2-year warranty

The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.

Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.

Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.

favorite_border favorite
LINCOLN - Tomahawk 1025 | Invertec Plasma Cutter
Save 5%

Lincoln Electric

Reference: K12048-1

LINCOLN - Tomahawk 1025 | Invertec Plasma Cutter
(1 review)

€3,020.12

€3,179.07

2 495,99 € tax excl.

or 4 x 755,03 €

Free delivery

2-year warranty

High-performance plasma cutting.

The Lincoln Electric Tomahawk plasma cutting system focuses on three elements:

  • S (Starting) - An innovative and patented starting system that preserves and extends electrode service life.
  • P (Performance) - Thanks to a very high-speed helical airflow combined with a special electrode and nozzles designed to concentrate the plasma flow.
  • L (Lifetime) - The optimised airflow cools the electrode and nozzle for extended service life.
  • Performance - Innovative electrode and cutting nozzle design.
  • Service life - The innovative design increases consumable lifespan.
  • Flexible - Numerous torch configurations.
  • Concentrated plasma flow - Low heat input, less distortion.
  • Cutting of various metals – Unalloyed steel, stainless steel, aluminium and others.

Main Features

  • advanced arc starting technology, without High Frequency (HF)
  • innovative electrode and nozzles
  • Extended consumable lifespan
  • Reduced heat input, less distortion
  • Numerous torch configurations

 Clean cut thickness 25 mm.
Separation cut thickness 30 mm.

Included accessories:
Power cable (3 m)
Manual torch LC 65 (7.5 m)
Cable and ground clamp set (6 m)
Air connection kit
Torch consumable parts kit

Your compressor must have an airflow of 130 litres per minute at a pressure of 5 bar for the proper operation of this cutter.

favorite_border favorite
GYS - Plasma Cutter GYS Cutter 70 CT+ torch 6 m MT-70
Save 10%

In stock

Gys

Reference: 013841

GYS - Plasma Cutter GYS Cutter 70 CT+ torch 6 m MT-70
(1 review)

€2,647.03

€2,941.15

2 187,66 € tax excl.

or 4 x 661,76 €

Free delivery

2-year warranty

The Gys CUTTER 70 CT plasma cutter has a cutting capacity of 35 mm thickness on steel and 25 mm on aluminium in separation mode.
Suited to industrial environments, it is highly effective on solid sheets, mesh sheets or painted structures.

Cutting speed superior to oxy-fuel.
Cuts all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Optimised machine cooling thanks to the ventilation channel isolating electronic components from dust.
Easy and quick consumable installation for maximum efficiency.

Premium TECMO® torch (leading supplier in Europe).
Superior cut quality: air-cooled torch body providing high arc stability at various operating levels.
Hypertherm®-compatible consumables.
Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required, facilitating transport and maintenance.
Easy-to-use trigger mechanism for greater comfort.

Intuitive control panel: - 3 working modes: solid sheet / perforated sheet / lock -
manual air pressure adjustment (4.1 < 6.5 bar) with front panel bargraph.
HF-free ignition to avoid interference that could damage nearby electronic equipment.
Compatible with CNC kit for automated cutting table.

Gouging with maximum removal - Allows significant metal removal (Skid and Nozzle specific options available)

Reinforced casing & anti-slip feet.

Supplied with an MT-70 torch 6 m long and an earth clamp + cable 4 m long - 10 mm² section


This plasma cutter requires connection to a compressed air supply with a flow rate of 185 L/minute.

favorite_border favorite
TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
Save €89.00

Supplier stock

Telwin

Reference: 816147 + 804416

TELWIN | Plasma cutter with integrated compressor Technology 54 XT + accessory box
(1 review)

€1,205.70

€1,294.70

996,45 € tax excl.

or 4 x 301,43 €

Free delivery

2-year warranty

favorite_border favorite
CUTTER 105 CT

Supplier stock

Gys

Reference: 081093

CUTTER 105 CT

€3,623.95

2 995,00 € tax excl.

or 4 x 905,99 €

Free delivery

2-year warranty

The CUTTER 105 CT is a high-performance plasma cutter, lightweight (29 kg) and powerful (105 A), designed for intensive use both in the workshop and on site. It provides a cutting capacity of up to 50 mm thickness on steel and offers 5 operating modes: cutting solid sheets, perforated sheets and gouging.

Key performance

  • High duty cycle: 105 A at 60%, for maximum productivity.

  • Cuts all types of metals (mild steel, stainless steel, hardened steel, HLE, aluminium, copper).

  • Concentrated arc for a clean cut with minimal slag.

Suited for harsh environments

  • Optimised cooling with electronic dust protection.

  • Reinforced casing, anti-shock feet, IP23 protection for outdoor use.

  • Compatible with generator (30 kW recommended).

  • Can be transported by a single person.

Ease of use

  • 5 cutting modes with locked trigger options.

  • Manual air pressure adjustment with front panel indicator.

  • Air filter with automatic purge to protect the torch.

  • HF-free ignition, avoiding electronic interference.

  • Integrated consumables compartment.

  • Optional analogue CNC kit for cutting tables.

  • Easy software update via USB-B port.

favorite_border favorite
EASYCUT 30 FV

In stock

Gys

Reference: 013858

EASYCUT 30 FV

€954.94

789,21 € tax excl.

or 4 x 238,74 €

Free delivery

2-year warranty

The EASYCUT 30 FV is a 30 A plasma cutter capable of cutting steel up to 10 mm (15 mm separation cut). Its HF-free ignition extends consumable life and protects surrounding electronic equipment. Ideal for maintenance and bodywork, it combines robustness with ease of use.

Thanks to inverter technology, it delivers quality cutting on mild steel, stainless steel, hardened steel, HSLA, aluminium and copper. The interface is clear with manual adjustment of current and air pressure via a front-panel flow meter.

The ergonomic 4 m air-cooled torch is designed for safe, stable and shock-resistant use. It is easily disconnectable for easy transport.

Equipped with Flexible Voltage technology (85–265V) and PFC, it adapts to all single-phase voltages and optimises power consumption with up to 30% energy savings. Its reinforced casing, anti-slip feet and compact format make it a reliable and portable tool for all environments.

favorite_border favorite
GYS EASYCUT 40 Plasma Cutter

In stock

Gys

Reference: 029743

GYS EASYCUT 40 Plasma Cutter
(15 reviews)

€801.80

662,67 € tax excl.

or 4 x 200,45 €

Free delivery

2-year warranty

Suitable for maintenance and bodywork, the EASYCUT 40 plasma cutter easily cuts all types of metal up to 15 mm thick. With a power output of 40 A, it excels at precision cutting at low amperage.

Inverter technology ensuring quality cutting on all steels (mild, stainless, hardened, HLE), aluminium, copper, etc.
Easy and quick consumable installation (Trafimet® standard).

Efficient cutting: air-cooled torch body providing high arc stability at various operating levels.
Easy-to-use trigger mechanism for greater comfort. Designed to withstand shocks and heat.
Quick torch connection/disconnection, no tools required.

Manual air pressure adjustment (2.5 < 6.5 bar) with front panel bargraph.
Automatic torch detection.
HF-free ignition to avoid interference that could damage nearby electronic equipment.

Protected against overvoltage and overcurrent
Torch presence or insufficient air pressure indicator.


→ Requires connection to a compressed air supply delivering 100 l/minute at a variable pressure between 2.5 and 6.5 bar depending on the machine setting.

Supplied with a TPT 40 torch 4 m long and a 10 mm² section earth clamp cable 2 m long.

favorite_border favorite
GYS Cutter 45 CT Plasma Cutter + TPT40 torch
Save 10%

In stock

Gys

Reference: 013629

GYS Cutter 45 CT Plasma Cutter + TPT40 torch
(5 reviews)

€1,406.78

€1,563.09

1 162,66 € tax excl.

or 4 x 351,70 €

Free delivery

2-year warranty

The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 20* mm thickness on a wide range of materials. Designed to operate in harsh environments, it features a very robust mechanism and an intuitive control panel.

• Cuts steels (mild, stainless, hardened, HSLA), aluminum, copper…
• 3 working modes:
- Cutting on solid sheets
- Cutting on grid supports
- Trigger lock
• HF-free ignition that avoids interference which could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.

Supplied with a TPT 40 torch for cutting only, with a length of 4 m.
* Clean cut is 15 mm, separation cut 20 mm and piercing 8 mm when this cutter is equipped with a TPT 40 torch

favorite_border favorite
TELWIN - Superior 70 Plasma cutter with manual torch 6 m length

Supplier stock

Telwin

Reference: 816170 +804041

TELWIN - Superior 70 Plasma cutter with manual torch 6 m length

€3,018.95

2 495,00 € tax excl.

or 4 x 754,74 €

Free delivery

2-year warranty

Inverter technology plasma cutter with contact pilot arc ignition.
Enables fast cutting without distortion, cutting through grating, and gouging of all conductive materials, such as steel, stainless steel, galvanized steel, aluminium, copper, or brass for example.

Easy-to-read digital display.
High cutting current stability.
Thermostatic protection against overvoltage and undervoltage, short circuits in the torch or absence of phase and air.
Cutting thickness: 20 - 30 mm depending on materials.
Adjustment range from 20 to 70 A

Options:
1) Interface with automated cutting table
2) Remote control

Requires connection to a compressor delivering 200 l/min of air at a pressure of 4 - 5 bar.

Supplied with:
1 Tecmo torch 6 m long fitted with a 70 A nozzle + 1 spare 70 A nozzle.
1 ground clamp + cable 25 mm² cross-section, 5 m long

favorite_border favorite
TELWIN | Plasma cutter pack Technology 41XT + consumables box

Supplier stock

Telwin

Reference: 816146+804415

TELWIN | Plasma cutter pack Technology 41XT + consumables box
(2 reviews)

€952.88

787,50 € tax excl.

or 4 x 238,22 €

Free delivery

2-year warranty

favorite_border favorite
LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
Save 20%

In stock

Lincoln Electric

Reference: K12038-3

LINCOLN TOMAHAWK 30K | - Plasma Cutter with integrated compressor
(2 reviews)

€1,810.09

€2,262.62

1 495,97 € tax excl.

or 4 x 452,52 €

Free delivery

2-year warranty

The Tomahawk 30 K plasma cutter is the most flexible plasma cutting machine on the market. The machines are delivered ready to use, capable of cutting quickly and precisely.
Powered by single-phase 230V, ideal for on-site work. With this cutter, plasma cutting will no longer be a problem — forget grinding, simply take the torch and cut in just a few seconds.

  • High performance - Innovative electrode and cutting nozzle design.
  • Flexible - a single-phase 230V power supply is sufficient.
  • Robust - long-life integrated compressor or external compressed air supply.
  • Portable 18.5 kg only, small and compact.
  • Cutting of various metals – Unalloyed steel, stainless steel, aluminum and others.

Output current range 15 - 30 A
Duty cycle 30A@60% - 25A@100%

Example of possible cutting thickness for steel:
Recommended cutting thickness: 12 mm
Clean cutting thickness: 16 mm maximum
Separation cutting thickness: 20 mm maximum

thanks to a button on the front of the unit, it can be connected to a compressor.

Delivered with
One LC 30 manual torch, length 4 m - EURO connector
Cable and ground clamp