PROMO -10%

Active filters

Filter by

Brand

Brand

Usage

Usage

By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.

Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.

Active filters

favorite_border favorite
GYS - PROGYS 200 A PFC GYS | MMA Inverter Welding Unit
Save 10%

In stock

Gys

Reference: 031432

GYS - PROGYS 200 A PFC GYS | MMA Inverter Welding Unit
(48 reviews)

€482.99

€536.66

399,17 € tax excl.

or 4 x 120,75 €

Free delivery

2-year warranty

Ideal and supremely powerful tool for the demanding professional
High duty cycle: 120A at 60% and 200A at 20%
Capable of welding 45 electrodes of Ø 3.2 mm in 1 hour
MMA and TIG Lift process
Current range: 10 to 200A
Welds steel, cast iron and stainless steel up to 10mm thickness
Electrode diameter: 1.6 to 5 mm
Technologies: Hot Start, Arc Force, Antisticking, PFC, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 96 V
Weight: 5.5 kg - 2-year warranty

Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 25mm²
1x Cable with electrode holder (2 meters) 25mm²

Optional: TIG valve torch - 4m - 10/25mm² (087583)

favorite_border favorite
ESAB - ROGUE ES 151i - MMA Inverter Welder
Save 10%

In stock

ESAB

Reference: 0705002006

ESAB - ROGUE ES 151i - MMA Inverter Welder
(1 review)

€388.21

€431.34

320,83 € tax excl.

or 4 x 97,05 €

  • Duty cycle 97A @25%
  • MMA/ Lift TIG
  • IP23S

Free delivery

2-year warranty

Why choose the Rogue ESAB ES 151i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 150A @25%
Compact and powerful: 10–150A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 3.2 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height

favorite_border favorite
ESAB - ROGUE ES 181i - MMA Inverter welding machine
Save 10%

In stock

ESAB

Reference: 0705002008

ESAB - ROGUE ES 181i - MMA Inverter welding machine
(6 reviews)

€438.63

€487.36

362,50 € tax excl.

or 4 x 109,66 €

Free delivery

2-year warranty

Why choose the Rogue ESAB ES 181i?
Two welding processes: MMA / Lift TIG
High duty cycle for a small unit: 97A@60% and 170A @20%
Compact and powerful: 10–180A single-phase (230V)
3-metre cable for power supply, electrode holder and earth clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes in DC
Generator compatible — IP23S
Ideal for maintenance services and the work of professional and passionate welders
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable 3 m long — 13 mm connector
1 earth clamp + 16 mm² cable 3 m long — 13 mm connector
1 shoulder strap for carrying the unit when working at height

favorite_border favorite
ESAB - ROGUE ES 181iP PRO - MMA Inverter welding machine
Save 10%

In stock

ESAB

Reference: 0705002007

ESAB - ROGUE ES 181iP PRO - MMA Inverter welding machine
(4 reviews)

€553.57

€615.08

457,50 € tax excl.

or 4 x 138,39 €

Free delivery

2-year warranty

Why choose the ESAB Rogue ES 181iP Pro?
For experienced welders looking for power
Two welding processes: MMA / Lift TIG
High duty cycle for a compact unit: 116A@60% and 180A @25%
Compact and powerful: 10–180A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for maintenance services and agriculture
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height

favorite_border favorite
ESAB - ROGUE ES 201iP PRO - MMA Inverter welding machine
Save 10%

In stock

ESAB

Reference: 0705002009

ESAB - ROGUE ES 201iP PRO - MMA Inverter welding machine
(10 reviews)

€700.79

€778.66

579,17 € tax excl.

or 4 x 175,20 €

Free delivery

2-year warranty

Why choose the ESAB Rogue ES 201IP Pro?
Two welding processes: MMA / Lift TIG
Duty cycle: 129A@60% and 200A @25%
Robust and powerful: 10–200A single-phase (230V)
3 m cables for power supply, electrode holder and ground clamp
Electrode diameter: 1.6 to 4 mm
Welds all Rutile, Basic, Stainless, Cast iron electrodes on DC
Generator compatible - IP23S
Ideal for craftsmen and advanced DIY enthusiasts
3-year warranty

Delivered with:
1 electrode holder + 16 mm² cable, length 3 m - 13 mm connector
1 ground clamp + 16 mm² cable, length 3 m - 13 mm connector
1 shoulder strap for carrying the unit when working at height

favorite_border favorite
This product is Euro Welding's choice This product is Euro Welding's choice
GYS - PROGYS 180A | MMA Inverter Welding Machine
Save 10%

In stock

Gys

Reference: 031425

GYS - PROGYS 180A | MMA Inverter Welding Machine
(95 reviews)

€321.66

€357.40

265,83 € tax excl.

or 4 x 80,42 €

  • Price drop
  • MMA up to 180A
  • Anti-stick

Free delivery

2-year warranty

Ultra powerful for professionals in workshop and maintenance
High duty cycle: 110A at 60% and 180A at 18%
MMA welding process
Current range: 10 to 180A
Welds steel, cast iron and stainless steel up to 10mm thickness
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, P400
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 72 V
Weight: 5.1kg - 2-year warranty

Delivered in a case with:
1x Cable with ground clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)

favorite_border favorite
LINCOLN - SPRINTER 160-S|MMA welding machine
Save 10%

In stock

Lincoln Electric

Reference: K14436-1

LINCOLN - SPRINTER 160-S|MMA welding machine

€529.37

€588.19

437,50 € tax excl.

or 4 x 132,34 €

Free delivery

2-year warranty

Key features of the Lincoln Sprinter 160-S:
Ideal for intensive work
High duty cycle at 160 A – 45% at 40°C
Welds rutile, basic and cellulosic electrodes from 1.6 to 4.0 mm in diameter
Open circuit voltage of 95V!
Multi-process: MMA and TIG Lift welding
Technologies: PFC, Soft Arc, Hot Start, Arc Force
Weight: 8.4 kg - Dimensions 162x305x438mm
3-year warranty

Supplied without accessories

favorite_border favorite
TELWIN - TECHNOLOGY 238 CE/MPGE TX | MMA Inverter Welding Unit
Save 10%

In stock

Telwin

Reference: 816258

TELWIN - TECHNOLOGY 238 CE/MPGE TX | MMA Inverter Welding Unit

€593.91

€659.90

490,83 € tax excl.

or 4 x 148,48 €

Free delivery

2-year warranty

The advantages of the Telwin Technology 238XT CE/MPGE welding unit:
Welds cellulosic 6010 and aluminium electrodes in addition to Rutile, Basic, Stainless Steel, and Cast Iron
Digital display
More power for intensive use (40°C): 200A @35%
Ideal for difficult situations and harsh environments
Designed to withstand impacts: Shock protection and metal handle
Two welding processes: MMA / Lift TIG
Generator compatible
Compact and powerful: 5–200A single-phase (230V)
Technologies: Inverter, MPGE, Arc Force, Hot Start, Anti Stick
Delivered in a carry case
Made in Italy
2-year warranty

This unit is delivered in a carry case and includes:

1 electrode holder + cable (length 3m, cross-section 25 mm²) Ø 50
1 ground clamp + cable (length 2m, cross-section 25 mm²) Ø 50
1 power cable with plug, length 2m, no plug

favorite_border favorite
GYSMI 100A welding machine
Save 10%

In stock

Gys

Reference: 083622

GYSMI 100A welding machine

€136.13

€151.25

112,50 € tax excl.

Free delivery

2-year warranty

Ideal for getting started with MMA welding
Duty cycle: 50A at 60% and 35A at 100%
Current range: 10 to 100A
Welds steel, cast iron and stainless steel up to 5mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 2.5 mm
Technologies: Hot Start, Arc Force, Antisticking
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 63 V
Featherlight: 2kg - 2-year warranty

Supplied with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap

favorite_border favorite
GYS - GYSMI E 163 | MMA inverter welder
Save 10%

In stock

Gys

Reference: 036635

GYS - GYSMI E 163 | MMA inverter welder
(8 reviews)

€277.29

€308.10

229,17 € tax excl.

or 3 x 92,43 €

Free delivery

2-year warranty

Digital interface for better readability of settings
3 welding modes: MMA, MMA pulse and TIG Lift DC
Duty cycle: 160A at 64%
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10mm thick
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technology: Hot Start, Arc Force, Antisticking, MMA Pulse, Tig Lift, ADS
Power supply: 230 Volts 50/60 Hz - 16A -
Open circuit voltage: 72 V
Weight: 7kg - 2-year warranty

Supplied in a case with:
1x Cable with earth clamp (1.6 metres) 16mm2 (10/25 mm2 connector)
1x Cable with electrode holder (2 metres) 16mm2 (10/25 mm2 connector)
1x Shoulder strap

favorite_border favorite
TELWIN - SUPERIOR 250 A Three-phase without accessories | MMA Inverter Welder
Save 10%

In stock

Telwin

Reference: 816039

TELWIN - SUPERIOR 250 A Three-phase without accessories | MMA Inverter Welder
(2 reviews)

€801.62

€890.69

662,50 € tax excl.

or 4 x 200,41 €

Free delivery

2-year warranty

Key features of the Telwin Superior 250 Tri welding machine:
High efficiency: 220A @25%
Welds rutile, basic, stainless steel and cast iron electrodes
Compact and lightweight (8.4 kg)
Robust and easy to adjust with potentiometer
Two welding processes: MMA / Lift Contact
Current range: 10 - 250 A
Technologies: Arc Force, Hot Start, Anti Stick
Made in Italy
2-year warranty

Delivered without accessories

favorite_border favorite
Disposable pure ARGON gas cylinder
Save 10%

In stock

Telwin

Reference: 802050

Disposable pure ARGON gas cylinder
(1 review)

€26.22

€29.14

21,67 € tax excl.

Fast delivery

2-year warranty

For TIG welding (Steel, Stainless steel, Aluminium) and MIG/MAG semi-automatic welding (WIRE) (Aluminium). Specifications: Volume: 950 cc Pressure: 60 bar at 20°C Contents: 60 L max Output valve: M10 Weight: 1120 g Pressure test: PH 165 bar

favorite_border favorite
Set chipping hammer + 3-row steel welding brush
Save 10%

In stock

Trafimet

Reference: lot 010341

Set chipping hammer + 3-row steel welding brush
(32 reviews)

€11.26

€12.51

9,31 € tax excl.

Fast delivery

2-year warranty

Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm

favorite_border favorite
Isothermal quiver for welding rod
Save 10%

In stock

Gys

Reference: 060258

Isothermal quiver for welding rod
(10 reviews)

€29.24

€32.49

24,17 € tax excl.

Fast delivery

2-year warranty

Capacity 7 kg
For electrodes up to 45 cm
Maximum electrode temperature 105°C
Dimensions: 500 x 120 x 110 mm - 430g

favorite_border favorite
GYSMI 130P welding machine with case
Save 10%

In stock

Gys

Reference: 029972

GYSMI 130P welding machine with case

€206.71

€229.68

170,84 € tax excl.

or 3 x 68,90 €

Free delivery

2-year warranty

Ideal for hobbyists or professionals
Duty cycle: 45A at 60% and 40A at 100%
Current range: 10 to 130A
Welds steel, cast iron and stainless steel up to 8mm thick
Compatible with rutile, stainless steel, cast iron and basic stick electrodes
Electrode diameter: 1.6 to 3.2 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Featherlight: 2.9kg - 2-year warranty

Delivered in a case with:
1x Cable with earth clamp (1.6 metres) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 metres) 16mm² (10/25 mm² connector)
1x Shoulder strap

favorite_border favorite
KEMPPI - MINARC 150 | MMA Inverter Welding Unit
Save 20%

In stock

Kemppi

Reference: 6102150

KEMPPI - MINARC 150 | MMA Inverter Welding Unit
(3 reviews)

€700.79

€875.99

579,17 € tax excl.

or 4 x 175,20 €

Free delivery

2-year warranty

Key features of the Kemppi Minarc Evo 150:
The little giant of MMA welding by Kemppi
Excellent welding and arc-striking quality
Automatic dynamic function
Compatible with long power cables
High duty cycle: 140A@35%
Lightweight and portable - 4kg
Generator compatible
Made in Finland
2-year warranty

This unit is delivered with:

1 electrode holder + cable (length 3m, cross-section 16 mm²)
1 earth clamp + cable (length 2m, cross-section 16 mm²)
1 power cable with plug, length 3m with Schuko plug

favorite_border favorite
ESAB | Multi-process welder ROGUE EMP 210 PRO
Save 10%

In stock

ESAB

Reference: 0700301092

ESAB | Multi-process welder ROGUE EMP 210 PRO
(6 reviews)

€1,506.45

€1,673.83

1 245,00 € tax excl.

or 4 x 376,61 €

Free delivery

2-year warranty

The ESAB Rogue EMP 210 PRO is a multi-process INVERTER technology welding machine designed to meet all your welding project needs, from light fabrication to repair and maintenance.
The system offers industrial-level arc performance and comprehensive controls that allow the welder to fine-tune arc characteristics to suit the material being welded.
Weighing only 16.7 kg, with a 230 V single-phase power supply and compatibility with 10 kVA generators, this system offers maximum flexibility and portability, both in the workshop and in the field.
True multi-process unit with Synergic MIG, Manual MIG, MIG brazing, flux-cored, Lift TIG and MMA (including 6010) processes
The 5.0" TFT screen is intuitive and clear, allowing the welder easy adjustment and a quick learning curve.
Synergic welding programs: complete range of welding parameters, 0.5 to 10.0 mm with a single control knob
Power Factor Correction (PFC): ensures a stable arc, resistant to mains voltage fluctuations, even when working with long extension cords up to 100 m
Unique robust industrial design: multiple handles for easy handling and cable management
Arc dynamics: precise adjustment of arc characteristics for a crisp / stable arc for carbon steel or a fluid / soft arc for stainless steel
Jobs: ability to save / recall up to 10 operations
Compliant with IP23S standard for indoor / outdoor use

Applications
Automotive construction
Automotive bodywork
Agricultural equipment
Civil engineering
Mechanical contractors
Repair and maintenance
Light fabrication

Package contents:
1 Multi-process welding machine 210 A with 3 m power cable and 16 A plug
1 MIG torch MXL 201, 3 m with Euro connector, with 1 contact tip for steel or stainless steel wire Ø 0.8 mm
1 Ground clamp with 3 m cable, OKC 35-50 16 mm2.
1 Electrode holder, Handy 200 A, heavy-duty 50 mm OKC, with 3 m cable.
1 Gas hose 4.5 m with quick connector.
1 Ø 200 mm spool of ESAB OK AristoRod steel wire 0.8 mm, weight 1 kg
1 Feed roller 0.6 / 0.8 mm (fitted on the machine) + 1 roller 0.8 / 1 mm for steel or stainless steel wire.
1 roller 0.8 / 0.9 mm for flux-cored wire
1 roller 1 / 1.2 mm for aluminum wire
1 nozzle for flux-cored wire (gasless) + 1 contact tip Ø 0.8 mm and 1 contact tip Ø 0.9 mm
1 user manual and safety instructions.

favorite_border favorite
TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
Save 7%

In stock

Telwin

Reference: 816232

TELWIN -TECHNOMIG 215 DUAL SYNERGIC |Multi-process welding unit
(32 reviews)

€1,018.58

€1,095.24

841,83 € tax excl.

or 4 x 254,65 €

Free delivery

2-year warranty

This tri-technology unit allows you, with a single machine, to weld in MMA, semi-automatic (MIG-MAG) and TIG modes.

MMA (electrode) and TIG welding solutions are available as options.

As standard, this semi-automatic unit features 17 programmed settings. The user simply needs to select the type of metal and the wire diameter. It is also possible to weld in manual mode by directly adjusting the settings parameters.

This welding unit uses wire on a spool. This welding process allows welding of thin materials (0.6 mm).

Very practical on thin sheets (automotive bodywork, chassis...), it avoids the weld bead restart that occurs when changing an electrode.

With the addition of a shielding gas, this unit enables welding on aluminium, stainless steel and steels in MIG-MAG and MMA mode, and steel, stainless steel and ferrous alloys in TIG mode.

Using a suitable wire of the CU Si3 type, it enables welding of HSS, EHS, UHS steels (automotive bodywork)

MIG welding with gas shielding requires the use of pure Argon gas for aluminium welding or an Argon + CO² mixture for steels and stainless steels.

Special case: For steel, it is possible to weld without gas when using flux-cored wire (which allows, for example, easier outdoor use). In this case, the thickness of the steel sheets must not be less than 1 mm to avoid the risk of burn-through.

This unit uses Ø 200 mm and 300 mm wire spools (flux-cored wire in 2 kg and other wires in 5 and 15 kg). An adapter for Ø 100 mm spools is available as an option. 

Upon delivery, this unit includes:
1 Mig 180 A torch (3 metres)
1 earth clamp + 1.9 m cable.
1 roller for steel/stainless steel wire Ø 0.6 and 0.8 mm.
1 steel/stainless steel contact tip Ø 0.8 mm
1 gas hose for refillable cylinder

TIG welding with gas shielding requires the use of pure Argon gas for welding steels, stainless steels, ferrous alloys and copper...

As an option:

It is possible to add an electrode holder with a 3 m cable in order to weld with electrodes from Ø 1.6 mm to 4 mm.

Reference KIT000514

It is possible to add a TIG torch 4 m in length in order to weld in TIG mode using pure Argon shielding gas.

For connecting the unit to gas, it is recommended to use the 804208 fitting.

 

 

 

favorite_border favorite
TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine
Save 10%

In stock

Telwin

Reference: 816060

TELWIN - ELECTROMIG 230 WAVE| Semi-automatic MIG MAG welding machine

€2,011.79

€2,235.32

1 662,66 € tax excl.

or 4 x 502,95 €

Free delivery

2-year warranty

Multi-process Synergic Inverter welding machine with an adjustment range of 10 to 240 A enabling the following welding processes:

1) Semi-automatic (welding wire) MIG-MAG, supports the use of steel, stainless steel, aluminium, brazing wire (special for automotive sheet metal) with the appropriate gas, and flux-cored wire for welding steel without gas.
The PULSE process guarantees high execution speed, excellent penetration and cleanliness, as well as welding in all positions.
This process is particularly recommended for welding thin aluminium and stainless steel.
Wire driven by a motor with 4 drive rolls.

The ROOT-MIG process makes it easier to weld sheet metal edge-to-edge, even with wide gaps (also in TIG welding mode).

2) Basic and rutile electrode rods from Ø 1.6 to 6 mm. (electrode holder optional)

3) Lift TIG start for welding steel, stainless steel and ferrous alloys. (TIG torch optional).
The ATC process is highly effective when welding thin materials (0.5 - 0.8 mm), as it reduces metal distortion caused by heat build-up.

The price includes in addition to the machine:

1 MIG/MAG torch 250A with a length of 3 m fitted with a 0.8 mm contact tip.
1 reversible drive roll for steel wire 0.6 / 0.8 mm (mounted on the machine).
1 earth clamp and cable

favorite_border favorite
TELWIN - TECHNOMIG 260 DUAL SYNERGIC | Multi-process welding machine

In stock

Telwin

Reference: 816056

TELWIN - TECHNOMIG 260 DUAL SYNERGIC | Multi-process welding machine
(1 review)

€1,289.65

1 065,83 € tax excl.

or 4 x 322,41 €

Free delivery

2-year warranty

The Technomig 260 Dual Synergic is a welding machine (MIG-MAG / FLUX / BRAZING / MMA / TIG-Lift) of 250A.
It is easy to use thanks to One Touch technology.
With its versatility, Technomig 260 Dual Synergic allows operation on different thicknesses and various welded and braze-welded materials, making it the ideal tool for many fields of application, from maintenance to heavy steelwork and bodywork.

It is possible to manually adjust the arc length to modify the shape of the weld bead according to the operator's style and preferences

One Touch
Setting up the Technomig 260 Dual Synergic is simple and immediate: just program the material thickness and start welding. The 25 synergic curves provided for different gases and materials allow quality welds on steel, stainless steel, aluminium and galvanized sheet metal without wasting time on machine adjustments.

ATC
This process allows welding of thin thicknesses with great ease, reducing material distortion
Arc stability even at low currents.
Fast and precise spot welding
facilitates edge-to-edge sheet metal welding

Delivered with:
1 MIG-MAG torch 250 A length 3 m
1 reversible roller for steel/stainless wire Ø 0.6/0.8 mm
1 gas hose length 1 m
1 earth clamp + cable length 3 m

For connecting the machine to gas, it is recommended to use fitting 804208.

favorite_border favorite
TELWIN - DUAL 240 WAVE Synergic | MIG MAG semi-automatic welder
Save 10%

In stock

Telwin

Reference: 816076

TELWIN - DUAL 240 WAVE Synergic | MIG MAG semi-automatic welder
(3 reviews)

€1,900.86

€2,112.07

1 570,99 € tax excl.

or 4 x 475,22 €

Free delivery

2-year warranty

Multi-process machine allowing MMA - MIG - TIG welding.

Multi-process MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift inverter welding machine controlled by microprocessor.
The WAVE OS system makes welding operations: customisable according to user requirements; traceable and analysable, thanks to data recording on USB; simplified, thanks to synergic parameter adjustment and the presence of specific programs for materials to be welded.
Features:
- 55 customisable programs,
- continuous and pulsed operation,
- user-friendly interface with colour TFT screen,
- Wave OS operating system with pulsed welding programs for specific materials (AB Pulse for aluminium and galvanised sheet metal) and low heat input for thin thicknesses (ATC).
Supplied with 250 A torch length 3 m duty cycle 200 A@60%, and earth clamp + cable 3 m

favorite_border favorite
GYS MULTIPEARL 210-4 XL Welding Machine
Save 10%

In stock

Gys

Reference: 065109

GYS MULTIPEARL 210-4 XL Welding Machine
(16 reviews)

€1,265.45

€1,406.06

1 045,83 € tax excl.

or 4 x 316,36 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminum from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 product:
- MIG/MAG with gas (steel/stainless steel wire Ø 0.6/0.8 to 1.6 mm and aluminum 0.8 to 1.6mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- DC TIG Lift - Lift arc ignition
- MMA (basic and rutile electrode up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and highly intuitive settings
Compatible with 9 kVA generator and 100m extension cord
Single-phase power supply 230 V - 16 A
Dimensions: 27.5 x 55 x 44 cm - 20kg
IP21 rating

Supplied with:
1x 250 A 3m torch MB25
1x 200A 2.5m ground cable
1x MMA electrode holder 2m
1x User manual
2x 0.8/1mm drive rolls

TIG torch optional

favorite_border favorite
GYS - MULTIWELD 180M-C | Multi-process welding machine
Save 10%

In stock

Gys

Reference: 078727

GYS - MULTIWELD 180M-C | Multi-process welding machine
(3 reviews)

€791.54

€879.49

654,17 € tax excl.

or 4 x 197,89 €

Free delivery

2-year warranty

Multi-process welding machine for professionals
Welds steel, stainless steel and aluminum up to 3mm thick
MIG duty cycle: 110A@ 60%-40°C
MMA duty cycle: 100A@ 60%-40°C
Current range: 20 to 150A
Combines 3 welding processes in 1 product:
- MIG/MAG with gas (solid wire Ø 0.6 to 0.8 mm)
- MIG/MAG without gas (flux-cored wire Ø 0.6 to 0.9 mm)
- MMA (electrode Ø 1.6 to 3.2 mm) with Anti-Sticking function
4-roll wire feeder for Ø 200 mm (5 kg) or Ø 300 mm (15 kg) spools
Removable MAG torch 150A 3m
Digital interface with very intuitive adjustment
Compatible with 8kVA generator
Single-phase power supply 230 V - 16 A
Dimensions: 53 x 28 x 45 cm - 16.5 kg

Delivered with:
1x 150A 3m torch
1x 2m 16mm² earth clamp
1x 2m 16mm² electrode holder
1 gas hose 1m + 2 hose clamps
1 contact tip wrench
1 contact tip 0.9 + nozzle for gasless wire

favorite_border favorite
GYS MULTIPEARL 211-4 welding machine
Save 10%

In stock

Gys

Reference: 065116

GYS MULTIPEARL 211-4 welding machine
(10 reviews)

€1,502.42

€1,669.35

1 241,67 € tax excl.

or 4 x 375,61 €

Free delivery

2-year warranty

Welds steel, stainless steel and aluminium from 0.6 to 6mm in all positions
MIG duty cycle: 130A at 60% / 110A at 100%
MMA duty cycle: 110A at 60% / 90A at 100%
TIG duty cycle: 135A at 60% / 115A at 100%
Current range: 20 to 200A - Voltage: 76V
Combines 4 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.6 mm and Alu 0.8 to 1.6mm)
- MIG/MAG gasless (flux-cored wire Ø 0.9 to 1.2 mm)
- TIG Lift DC current - Lift Arc TIG starting
- MMA (basic and rutile electrodes up to 5 mm)
4 drive rolls for spool Ø 200 mm (5 kg) or Ø 300 mm (15kg)
Removable STEEL MIG torch 250A 3m (8mm contact tip)
Digital interface and very intuitive adjustment
Compatible with 9 kVA generator and 100m extension lead
Gas cylinder support included
Single-phase 230 V - 16 A power supply
Dimensions: 41 x 72 x 77 cm - 27kg
IP21 rating

Supplied with:
1 x 250 A torch 3m MB25
1 x 200 A earth clamp 2.5 m
1 x MMA electrode holder 2 m
2x 0.8 / 1.0 drive rolls

TIG torch optional

favorite_border favorite
GYS - MULTIWELD 200M welding machine - WITH ACCESSORIES
Save 10%

In stock

Gys

Reference: 066595

GYS - MULTIWELD 200M welding machine - WITH ACCESSORIES

€1,003.30

€1,114.77

829,17 € tax excl.

or 4 x 250,83 €

Free delivery

2-year warranty

Generator on wheels Welds steel, stainless steel and aluminium MIG duty cycle: 115A at 60% / 90A at 100% MMA duty cycle: 104A at 60% / 80A at 100% Amperage range: 30 to 200A Combines 3 welding processes in 1 product: - MIG/MAG with gas (steel/stainless wire Ø 0.6 to 1 mm and Alu 0.8 to 1mm) - MIG/MAG without gas (flux-cored wire Ø 0.9 mm) - MMA (basic and rutile electrode up to 4 mm) with Anti-stick function 4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool Removable 250A MAG torch (2T/4T) 3m (8mm contact tip) Digital interface and very intuitive adjustment Compatible with 9kva generator Bottle support for gas cylinder up to 4m3 Single-phase 230 V - 16 A power supply Dimensions: 77 x 79x 47 cm - 32kg IP23 rating for outdoor use Accepts long extension cables (100m)

Delivered with: 1x 250A 3m torch - (MB25) 1x 2m 16mm² ground clamp 1x 2m 16mm² electrode holder 1x 1m20 gas hose

favorite_border favorite
KEMPPI - MINAR MIG M 223 with integrated 3M torch
Save 10%

Supplier stock

Kemppi

Reference: MIM223GM

KEMPPI - MINAR MIG M 223 with integrated 3M torch

€1,864.40

€2,071.56

1 540,83 € tax excl.

or 4 x 466,10 €

Free delivery

2-year warranty

KEMPPI - MINAR MIG M 223 with integrated 3M torch

favorite_border favorite
KEMPPI - MINAR MIG M 223 pulse with 3M torch
Save 10%

Supplier stock

Kemppi

Reference: MIM223PGM

KEMPPI - MINAR MIG M 223 pulse with 3M torch

€2,203.21

€2,448.01

1 820,84 € tax excl.

or 4 x 550,80 €

Free delivery

2-year warranty

KEMPPI - MINAR MIG M 223 pulse with 3M torch and European connector.

favorite_border favorite
SOUDEXPERT Cart for MIG-TIG welding machine
Save 10%

In stock

Soudexpert

Reference: TR-01

SOUDEXPERT Cart for MIG-TIG welding machine

€89.74

€99.72

74,17 € tax excl.

Fast delivery

2-year warranty

This cart is the ideal way to move your welding machine or your bodywork dent puller
It is a 2-in-1 cart: welding machine + gas cylinder on the same stand
Assembled dimensions: 840 X 385 X H 700 mm
Useful dimensions of the upper tray: 45 x 28 cm

Cart sold bare. Delivered unassembled.

favorite_border favorite
GYS- PROTIG 161 DC HF | TIG welder with 4m TIG torch
Save 10%

In stock

Gys

Reference: 062054

GYS- PROTIG 161 DC HF | TIG welder with 4m TIG torch
(8 reviews)

€755.40

€839.33

624,32 € tax excl.

or 4 x 188,85 €

Free delivery

2-year warranty

Ultra-compact and designed for craftsmen, the PROTIG 161 DC HF (160 A) delivers high-quality welds on mild and stainless steels thanks to its advanced secondary regulation. Its intuitive interface makes parameter adjustment straightforward.

OPTIMISED DC WELDING
Secondary regulation: ensures optimal arc stability and constant current in all positions.
TG DC: ensures quality welding on all ferrous materials such as steel, stainless steel, but also copper and its alloys…
TIG DC Pulsed: controls the temperature of the weld pool, limits distortion and thus allows the joining of thin sheets from 0.3 mm.
SPOT: fast and precise tacking before welding thin sheets.
2 ignition types: HF non-contact or LIFT contact for electrosensitive environments.
3 trigger modes: 2T, 4T and 4T LOG.
Automatic torch detection: compatible with blade and double-button torches

MMA WELDING
MMA: Basic and Rutile electrodes (up to Ø 4 mm)
Pulsed MMA: facilitates upward vertical position welding (pipes/pipeline…)
3 integrated welding aids:
- Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable in seconds depending on the metal type
- Arc Force: temporary current increase in difficult welding situations.

INTUITIVE
Current and voltage display during and after welding (WPS/WPQR).
Memorisation of 10 programs per process for perfect reproducibility of your welds.
Intelligent fan management to reduce power consumption, dust intake and machine noise.

GYS- PROTIG 161 DC HF | TIG welder with 4m TIG torch

→ Supplied with:
1 TIG torch SR17 DB - 4 m, + accessories *
1 electrode holder and earth clamp with 25 mm² section cable, length 2 m.

* 1 electrode holder Ø 1.6 and 2.4 mm
1 diffuser for electrode Ø 1.6 and 2.4 mm
1 ceramic nozzle GR7 and GR5
1 long cap and 1 short cap

favorite_border favorite
KEMPPI |MINARC T 223 AC / DC TIG welder
Save 5%

In stock

Kemppi

Reference: Kemppi Minarc 223 AC/DC Tig

KEMPPI |MINARC T 223 AC / DC TIG welder

€3,623.95

€3,814.68

2 995,00 € tax excl.

or 4 x 905,99 €

Free delivery

2-year warranty

Welding and pickling with a single TIG machine
The Minarc T223 AC/DC is a brand new single-phase 220 A TIG AC/DC welding unit with an integrated electrolytic weld pickling process.

The Minarc T223 AC/DC includes standard and pulsed welding functions as well as memory channels and remote control options.
The adjustment controls are easy to use and the large, clear colour screen features a protective cover against impacts.

The new MAX Weldclean process is simple and quick to use.
Converting the TIG torch to pickling mode takes only a few moments. Your welds are clean, ready and perfect faster.

You weld, clean the welds with a low current and a cleaning solution, then neutralise with water.

The unit comes with:
- a TX225G torch with a length of 4 m
- A ground clamp + cable 

favorite_border favorite
TELWIN - TIG AC/DC HF Technology 222 | TIG welding machine without accessories
Save 10%

In stock

Telwin

Reference: 816208

TELWIN - TIG AC/DC HF Technology 222 | TIG welding machine without accessories

€1,854.48

€2,060.53

1 532,66 € tax excl.

or 4 x 463,62 €

Free delivery

2-year warranty

This machine allows welding with tungsten electrodes (TIG welding) steel, stainless steel, copper, nickel ...including aluminium .

It also allows welding with rutile or basic electrodes (MMA welding kit optional).

It features the following functions:

TIG LIFT: Facilitates electrode striking.

TIG HF High frequency CONTACTLESS ignition

TIG 2T/4T (manual or automatic welding)

TIG SPOT allows tacking of parts before welding.

HOT START adjustable: additional starting power for electrodes that are difficult to strike.

SLOPE DOWN adjustable: this system eliminates arc fade, thus preventing the formation of a crater at the end of the weld bead.

ARC FORCE: This process increases the amperage when the welding arc is kept short, which has the effect of increasing penetration and the mechanical strength of the weld bead.

ANTI STICKING: in the case of welding with coated electrodes, prevents electrode overloading and thus preserves its characteristics,

TIG BI LEVEL: two different welding current parameters can be selected during the welding process, PRE-GAS/POST-GAS

( automatically adjusted by the microprocessor according to the current intensity and the welding duration.

VRD: Improves safety during welding operations in damp environments

It also features the PULSE function particularly suited for welding thin plates where low heat input to the workpiece is required and adapted for welding in all positions.
As the pulse frequency increases, arc stability increases and therefore welding precision improves as well.
It also features the EASY PULSE system allowing immediate pulsed mode welding even if the welder is not familiar with TIG welding, thanks to automatic parameter adjustment

THINSPOT function, enabling fast and precise spot welding.

For gas connection of the machine, it is recommended to use fitting 804208.

favorite_border favorite
GYS- PROTIG 201 AC DC HF FV | TIG Welding Unit with SR 26DB Torch - 4 M
Save 10%

Supplier stock

Gys

Reference: 063945

GYS- PROTIG 201 AC DC HF FV | TIG Welding Unit with SR 26DB Torch - 4 M
(8 reviews)

€1,802.90

€2,003.23

1 490,00 € tax excl.

or 4 x 450,73 €

Free delivery

2-year warranty

The PROTIG 201 AC/DC is the professional TIG welding solution for joining all types of materials up to 4 mm thick (steel, stainless steel, aluminium, copper or titanium).
It offers very high precision across many fields such as craftsmanship, maintenance or pipework.
Equipped with a water cooling unit, it allows the use of more ergonomic TIG torches.

6 TIG AC/DC welding processes

TIG DC: Ensures quality welding on all ferrous materials such as steel, stainless steel, but also copper and its alloys, titanium…
Pulsed TIG DC: Controls the temperature of the weld pool, limits distortion and thus allows the joining of thin sheets from 0.3 mm.
TIG DC Spot: Pre-assembles ferrous metal parts by tacking

TIG AC Easy: Simplifies the use of the welding unit through predefined parameters. The user only selects the diameter of their tungsten electrode on the interface
TIG AC Standard: Dedicated to welding aluminium and its alloys (Al, AlSi, AlMg, AlMn…). The alternating current ensures prior cleaning of the aluminium for a quality weld.
TIG AC Spot: Pre-assembles aluminium parts by tacking.

2 coated electrode welding modes

Standard MMA: Accepts basic and rutile electrodes up to Ø 4 mm
Pulsed MMA: Facilitates welding in the upward vertical position (pipes/pipeline...).

User assistance for the welder

2 ignition types: HF non-contact or LIFT for electrosensitive environments
3 trigger modes: - 2T: maintain pressure on the trigger throughout the weld.
- 4T: to start welding, hold the trigger once then press again to stop welding.
- 4T «LOG»: the operator can switch between 2 welding currents at any time with a brief trigger pulse (hot current and cold current)

MMA welding aids: - Antisticking: reduces the risk of electrode sticking upon contact with the workpiece
- Hot Start: facilitates arc ignition and is adjustable depending on the metal type
- Adjustable Arc Force: regulates arc length variations

VRD (voltage reduction device): welding current is only delivered when the electrode is in contact with the workpiece (not activated by default).

• Memorisation of up to 50 programs per process
• Connectivity for remote controls (foot pedal, manual remote control)
• Current/voltage display after welding (verification of WPS/WPQR compliance)
• Reinforced casing with anti-shock pads

Unit supplied with:
1 double-button torch SR26, length 4 m
1 earth clamp + cable, length 2 m
1 electrode holder
1 accessory kit 

GYS- PROTIG 201 AC DC HF FV | TIG Welding Unit with SR 26DB Torch - 4 M

favorite_border favorite
TELWIN - Supertig 302 AC/DC | TIG welding machine with accessories
Save 10%

Supplier stock

Telwin

Reference: 816209+802788

TELWIN - Supertig 302 AC/DC | TIG welding machine with accessories

€2,707.37

€3,008.19

2 237,50 € tax excl.

or 4 x 676,84 €

Free delivery

2-year warranty

TIG AC/DC inverter welding machine (HF or LIFT), PULSED TIG (PULSE and EASY PULSE) and MMA.
Compatible with various types of materials such as steel, stainless steel, aluminum, titanium, copper, nickel, magnesium and their alloys.
Designed to guarantee excellent results on any thickness, even the finest, the PULSE mode (including the simplified EASY PULSE version) reduces material distortion by ensuring high arc stability.
Advanced functions: MIX AC-DC for preparing AC welding of large-mass workpieces; THINSPOT for spot welding of very thin sheet metal.
The CL screen facilitates interaction with the product and simplifies the adjustment of multiple TIG welding curve parameters depending on the job.
Ability to save and recall custom programs.
Electrode welding in both continuous and pulsed mode (MMA Pulse), guaranteeing excellent results with basic electrodes and in positional welding.
Designed to guarantee long-term reliability, it features a dedicated air tunnel cooling system that protects against dust and dirt.
Specifications:
TIG

  • pulsed and EASY pulsed operation; in 2/4 stroke, Bi Level;
  • 10 customizable welding programs;
  • adjustment of multiple welding curve parameters: electrode pre-heating, initial/final current, spot welding time, pre/post gas, initial/final current ramp, DC/AC balance, square wave frequency;
  • Advanced functions: THINSPOT for spot welding of very thin sheet metal; MIX AC-DC for heating the workpiece and preparing it for AC welding;
  • start (HF/LIFT) at optimized minimum current;
  • pre-equipped for remote control;
  • compatibility with PRO torches;

MMA

  • operation in continuous and pulsed current (MMA PULSE);
  • hot start, arc force settings;
  • anti-stick protection;
  • VRD device;

Other specifications:

  • CL screen for simplified interaction, immediate display and configuration of parameters;
  • long-term reliability thanks to the dedicated air tunnel cooling system that protects against dust and dirt;
  • ensures best performance even in the presence of undervoltages (up to -25%) and overvoltages (+15%);
  • compact structure for easier transport and space saving;
  • thermostatic, overvoltage, undervoltage, internal dirt, overcurrent, phase loss protections.

Supplied with TIG welding accessories.
1 TIG torch ST 26, length 4 m.
1 regulator with 2 pressure gauges for refillable cylinder.
1 ground clamp + 25 mm² cable, length 3 m
1 gas hose, length 2 m

favorite_border favorite
GYS Cutter 45 CT Plasma Cutter + TPT40 torch
Save 10%

In stock

Gys

Reference: 013629

GYS Cutter 45 CT Plasma Cutter + TPT40 torch
(5 reviews)

€1,406.78

€1,563.09

1 162,66 € tax excl.

or 4 x 351,70 €

Free delivery

2-year warranty

The CUTTER 45 CT is a 45 A plasma cutter with a cutting capacity of 20* mm thickness on a wide range of materials. Designed to operate in harsh environments, it features a very robust mechanism and an intuitive control panel.

• Cuts steels (mild, stainless, hardened, HSLA), aluminum, copper…
• 3 working modes:
- Cutting on solid sheets
- Cutting on grid supports
- Trigger lock
• HF-free ignition that avoids interference which could damage nearby electronic equipment
• Pre-wired for use on an automatic cutting table.
• Flexible Voltage, the CUTTER operates on a supply voltage between 85 and 265 V.

Supplied with a TPT 40 torch for cutting only, with a length of 4 m.
* Clean cut is 15 mm, separation cut 20 mm and piercing 8 mm when this cutter is equipped with a TPT 40 torch

favorite_border favorite
Telwin Technology 60 XT plasma cutter
Save 10%

In stock

Telwin

Reference: 816148

Telwin Technology 60 XT plasma cutter
(2 reviews)

€1,204.96

€1,338.84

995,83 € tax excl.

or 4 x 301,24 €

Free delivery

2-year warranty

This inverter technology plasma cutter with pilot arc contact ignition allows you to cut without deformation all conductive materials such as steel, stainless steel, galvanized steel, aluminum, copper, brass and wire mesh
It is compact and has a small footprint (450 x 182 x H 292 mm) and weight (7 kg)
This cutter enables a clean cut on materials up to 25 mm thick or 20 mm in separation.
It allows sheet metal piercing (see the user manual for this purpose) on supports with a maximum thickness of 4 mm
Consumable change indicator device

The compressor flow rate must be 100 L/minute with a pressure of 4-5 bar for proper operation of the unit.

This cutter is equipped with a warning indicator light for consumable replacement 

Supplied with a 4 m torch + ground clamp and 3 m cable

favorite_border favorite
EASYCUT 25
Save 10%

In stock

Gys

Reference: 065543

EASYCUT 25
(2 reviews)

€625.17

€694.64

516,67 € tax excl.

or 4 x 156,29 €

Free delivery

2-year warranty

The EASYCUT 25 plasma cutter is an ideal solution for precise cutting of all types of metals up to 8 mm thick. Ultra-lightweight (7.8 kg) and easy to transport, it delivers excellent performance without compromising on quality.

Equipped with inverter technology, it ensures clean cutting on steel (mild, stainless, hardened, HSLA), aluminum, copper, and more. Its HF-free ignition protects nearby electronic equipment, while its ergonomic torch, resistant to shocks and heat, ensures comfort and stability.

Easy to use, the EASYCUT 25 features an intuitive control ring, manual air pressure adjustment (2.5 to 6.5 bar) with a bargraph, as well as automatic torch detection. Its robust design with reinforced body and disconnectable components makes it a reliable and durable tool, ideal for workshops and bodywork applications.

favorite_border favorite
Welding Helmet SOUDEXPERT VISION 11 TRUE COLOR
Save 15%

In stock

Soudexpert

Reference: 202510

Welding Helmet SOUDEXPERT VISION 11 TRUE COLOR

€25.21

€29.66

20,83 € tax excl.

Fast delivery

2-year warranty

Automatic Vision 11 TC welding helmet True-Color technology Matte black colour, easy to clean Fixed light shade: DIN 3 Fixed dark shade: DIN 11 Wide field of view: 90x35mm Solar power + Lithium battery Number of sensors: 2 Automatically switches from light to dark shade on arc strike Ultra fast: 0.6 milliseconds Return to light state from 0.2S to 0.8S UV protection: DIN16 Optical class 1/1/1/2 Weight 420 grams

Application fields: MMA 10-150 / TIG 10-175 / MIG-MAG 10-200 Standards: EN 175 / EN 379

favorite_border favorite
GYS LCD ERGOTECH DREAM + True color XL welding helmet
Save 10%

In stock

Gys

Reference: 068674

GYS LCD ERGOTECH DREAM + True color XL welding helmet
(49 reviews)

€125.04

€138.93

103,34 € tax excl.

Free delivery

2-year warranty

LCD WELDING MASK ERGOTECH DREAM
Essential for safety, the ERGOTECH 5-9/9-13 optoelectronic welding helmet protects the welder's face and eyes from UV, infrared and spatter. Fully automatic, the mask switches from clear to dark state in a fraction of a second, from the moment the arc is struck. Supplied with a Multifit + headband, it frees the welder's hands and provides all the comfort needed for welding work.
This welding helmet features TRUE COLOR technology

UV/IR protection level: DIN 15
Clear shade: 3
Shade: adjustable from 5-9 and 9-13 13
Classification: 1/1/1/1
Field of view: 100 x 67 mm
Reaction time: 0.08 ms
Number of sensors: 4
Return to clear time 0.15>0.8 sec
Adjustments: sensitivity, shade tester, delay, grinding
Power supply: solar + 2 CR 2032 batteries
Weight: 560 g
Standards: EN 175 / EN 379


Applications
MMA: 5 to 400 A
TIG: 5 to 300 A
MIG/MAG: 5 to 400 A
Grinding mode (Grind)

Replacement lenses:
Outer lens 114 x 133 mm (ref. 043893)
Inner lens 103.7 x 69.5 mm (ref. 043695)

favorite_border favorite
STRONG AND TOOLS | Modular Rhino Cart Welding Table
Save 10%

In stock

StrongHandTools

Reference: TDQ612075-K1

STRONG AND TOOLS | Modular Rhino Cart Welding Table
(6 reviews)

€2,253.62

€2,504.02

1 862,50 € tax excl.

or 4 x 563,41 €

Free delivery

2-year warranty

Table top dimensions 1200 x 750 mm. Height 910mm
The table top nitrided and black oxidized, reversible and resistant to welding spatter, to rust and scratches
Top thickness: 16 mm - Hole spacing 50 x 50 mm
Hole diameter: 16 mm
Maximum permitted weight: 680 kg
Lockable casters + leveling feet for mobile or stationary use

Delivered with accessories.

Optional: Plasma cutting top
The plasma cutting top supports 45 kg, over a450 x 710 mm cutting surface with 14 reversible slats.
The generous width of 45 mm between the cutting blades provides sufficient space for clamping the blank holder.
The blades remain in place when the top is folded.
Cut, clamp and fasten at a single convenient mobile workstation at an ideal and uniform working height.

Plasma cutting top

 

 

favorite_border favorite
Brushless battery drill driver TDLI205581 | 20 V
Save 10%

In stock

TOTAL

Reference: 41878

Brushless battery drill driver TDLI205581 | 20 V

€40.23

€44.70

33,25 € tax excl.

Fast delivery

2-year warranty

20 V battery drill. Compact brushless motor. Maximum torque 55 Nm. Self-locking metal chuck with capacity up to 13 mm. With 22 torque settings and one screwdriving position. 2 mechanical speeds. RPM 0-500 / 0-2000. LED light. Battery and charger not included.

favorite_border favorite
Brushless battery-powered hammer drill TIDLI206681 | 20 V
Save 20%

In stock

TOTAL

Reference: 41826

Brushless battery-powered hammer drill TIDLI206681 | 20 V

€59.49

€74.37

49,17 € tax excl.

Fast delivery

2-year warranty

20 V battery-powered hammer drill. Brushless motor. Maximum torque of 66 Nm. Metal and automatic chuck with 13 mm capacity, 22 tightening positions, one drilling position and one hammer position. Impact rate 30,000 bpm. RPM 0-550 / 0-2200. 2 speeds and LED light. Batteries and charger not included.

favorite_border favorite
Brushless battery-powered hammer drill TIDLI209681 | 20 V
Save 10%

Supplier stock

TOTAL

Reference: 41879

Brushless battery-powered hammer drill TIDLI209681 | 20 V

€89.74

€99.72

74,17 € tax excl.

Fast delivery

2-year warranty

20 V battery-powered hammer drill. Compact brushless motor. Maximum torque of 96 Nm. Self-locking metal chuck with capacity up to 13 mm. With 22 clutch positions, one for screwdriving and one for hammering. 2 mechanical speeds. ROTATION SPEED 0-500 / 0-2000. Impact 30000/min. LED lighting. Battery and charger not included.

favorite_border favorite
This product is Euro Welding's choice This product is Euro Welding's choice
Battery-powered mini angle grinder TAGLI76011 | 20 V
Save 10%

In stock

TOTAL

Reference: 41214

Battery-powered mini angle grinder TAGLI76011 | 20 V

€40.23

€44.70

33,25 € tax excl.

Fast delivery

2-year warranty

76 mm battery-powered grinder 20 V. No-load speed 19500 rpm. Disc diameter 76 mm. Arbor diameter M6. With 4 abrasive discs, 2 metal cutting discs and 1 diamond disc. Batteries and charger not included.

favorite_border favorite
Vacuum Cleaner TVC12202 | 1000 W - 12 l
Save 10%

In stock

TOTAL

Reference: 40914

Vacuum Cleaner TVC12202 | 1000 W - 12 l

€60.37

€67.08

49,90 € tax excl.

Fast delivery

2-year warranty

12 L wet and dry vacuum cleaner. Maximum power of 1000 W. Suction capacity>=15 kPa. Tank capacity of 12 L. Suction hose diameter of 32 mm. Suction hose length of 1.5 m. Includes a floor nozzle, a plastic hose, a filter, a crevice tool, and a fabric dust bag.

favorite_border favorite
Cutting guide carriage for plasma torch
Save 10%

In stock

Trafimet

Reference: CV0024

Cutting guide carriage for plasma torch
(4 reviews)

€28.24

€31.38

23,34 € tax excl.

Fast delivery

2-year warranty

Cutting guide carriage for plasma cutter torch

Compatible with TRAFIMET torches;

References:

Ergocut S 25K / S 35K / S 25

Ergocut S45 

favorite_border favorite
TELWIN | Plasma torch for Technology 41 XT cutter
Save 10%

Supplier stock

Telwin

Reference: 804155

TELWIN | Plasma torch for Technology 41 XT cutter

€194.10

€215.67

160,42 € tax excl.

or 3 x 64,70 €

Free delivery

2-year warranty

Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m

favorite_border favorite
SILICONI | Can of anti-spatter for welding

In stock

SILICONI

Reference: PROTECT 700

SILICONI | Can of anti-spatter for welding
(1 review)

€55.36

45,75 € tax excl.

Fast delivery

2-year warranty

PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.

Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.

INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS

 It is also possible to apply this anti-spatter product with a brush on the surface to be treated.

Combinations Price quantity
€144.29
€55.36
favorite_border favorite
GYS - GYSPOT Stud Puller - Straightening Unit 3500 A - Manual Gun

In stock

Gys

Reference: GYSPOT 34.02-34.04

GYS - GYSPOT Stud Puller - Straightening Unit 3500 A - Manual Gun

€1,184.78

979,16 € tax excl.

or 4 x 296,20 €

Free delivery

2-year warranty

The GYSPOT 34.02 and 34.4 have a power of 3500 A. These dent pullers are tools for dent repair and straightening of steel body panels (hood, door, roof, etc.). They feature several functions that make them complete and versatile tools. Thanks to its low power consumption, this nail puller model is powered by a simple 230 V outlet for the 34.02 model
We offer it in two versions: Single-phase 230 V (reference 065741) and three-phase 400 V (reference 067943)

A MULTI-FUNCTION DENT PULLER
Operating modes: • Welding of stars or rings for steel sheet pulling operations.
• Welding of corrugated wire, ideal for straightening a rounded profile (e.g.: wheel arch)
• Shrinking, for light impacts and finishing work.
• Use of the graphite pencil. • Welding of steel studs.

EASY TO USE
• Switch to toggle to graphite pencil mode.
• Intuitive, the potentiometer allows you to select both the power and the desired mode.
• Manual, the weld is generated by a simple press of the gun trigger.

It comes with an inertia hammer fitted with a star tip, nail puller + 3 stars - 1 shrinking tip and a ground pad

Cable lengths:
Ground: Section 50mm² - length 1.7 m
Gun: Section 50 mm² - length 2 m 

Combinations Price quantity
€1,183.78
€1,184.78
favorite_border favorite
Nail Puller - Straightening Machine GYS Gyspot 39.2

In stock

Gys

Reference: 052215

Nail Puller - Straightening Machine GYS Gyspot 39.2
(2 reviews)

€1,115.02

921,55 € tax excl.

or 4 x 278,76 €

Free delivery

2-year warranty

This dent puller has a power of 3800 A
It runs on a 16A outlet and a 230 V power supply

It allows:
The welding of studs, rings or rivets.
It features a "shrinking" function, sheet metal heating pen
It can be used as a nail puller with star attachments

Only 2 parameters to select:
• the power level (among 11 levels)
• the tool used (among 7 tools) => No need to set the time and intensity anymore. Automatic ignition system The weld spot is automatically generated by a simple contact between the tool and the panel to be straightened

It is supplied with a slide hammer + 1 box of accessories 

Cable lengths:
Ground: Section 70 mm² - length 2 m
Gun: Section 70 mm² - length 2 m 

favorite_border favorite
CEPRO Omnium Triptych Welding Protection Screen
Save 10%

In stock

CEPRO

Reference: 36.36.65

CEPRO Omnium Triptych Welding Protection Screen
(1 review)

€448.70

€498.56

370,83 € tax excl.

or 4 x 112,18 €

Free delivery

2-year warranty

Omnium XL 435 cm triptych screen with curtain

Reference 36.36.65

Triptych welding screen with curtains
Total length 4.35 m - Width of central panel 215 cm + 2 pivoting side panels of 110 cm
Curtain height: 160 cm

Orange curtain - Compliant with standard EN ISO 25980
Curtain held by plastic suspension rings.
4 castors Ø 75 mm, 2 of which are fitted with brakes
Base and masts: rectangular tube 40 x 30 x 2 mm - round transverse tubes Ø 30 x 2 mm.
Grey frame RAL 7035

favorite_border favorite
AEG - 18V cordless hammer drill - BSB18CBL-0
Save 10%

In stock

AEG Powertools

Reference: 4935451082

AEG - 18V cordless hammer drill - BSB18CBL-0
(2 reviews)

€197.01

€218.90

162,88 € tax excl.

or 3 x 65,67 €

Free delivery

2-year warranty

. BRUSHLESS* 18V motor
. Compact and powerful for all applications on your job site
. Most compact hammer drill on the market ( 151 mm long without chuck and 193 mm with )
. 75 Nm with 4.0Ah battery / 60 Nm with 2.0Ah battery
. 2 speeds 0-550 / 0-2100 rpm
. Supplied with a side handle and a 13mm self-tightening chuck for maximum versatility
. Handle and micro-texture coating for a firm and comfortable grip
. 1/4 HEX socket once the chuck is removed. The 25mm bit can be left in place even when the chuck is fitted
. Torque (tightening) and speed performance remain the same even when the tool is fitted with its offset chuck or angle head chuck
. Integrated LED lighting on the front of the tool to illuminate dark work areas
. 3-mode selector: drilling, screwdriving, hammer drilling
. AEG PRO Lithium-Ion technology with overload and overheat protection for longer tool and battery life

Batteries and charger available as optional extras below

favorite_border favorite
AEG - Cordless Multitool 18 V -BMT 18-0
Save 10%

In stock

AEG Powertools

Reference: 4935478943

AEG - Cordless Multitool 18 V -BMT 18-0

€214.78

€238.65

177,51 € tax excl.

or 3 x 71,59 €

Free delivery

2-year warranty

. belt hook
. Interchangeable tool heads, rotatable 360° for easy switching between functions
. 6-position speed variator on a wider, more ergonomic trigger
. Softgrip handle
. Easy blade change without tools
. Oscillation angle 3.6°
. Compact and powerful - Lightweight 1.2 kg (1.46 with battery)
. LED lighting of the work area
. Design engineered for optimal ergonomics and better vibration absorption
. Supplied with cutting and sanding accessories
. Compatible with all tools in the PRO18V range

Batteries and charger available as optional extras below

favorite_border favorite
EASYCUT K25
Save 10%

In stock

Gys

Reference: 068063

EASYCUT K25

€902.45

€1,002.73

745,83 € tax excl.

or 4 x 225,61 €

Free delivery

2-year warranty

The EASYCUT K25 is a high-performance plasma cutter capable of cutting all types of metals up to 8 mm thick, thanks to its integrated air compressor, ideal for outdoor work without a compressed air source. It guarantees precise cuts without distortion, even on painted structures (steel, stainless steel, cast iron up to 8 mm; aluminum and copper up to 6 mm).

Equipped with the HF-free "Arc Pilot" ignition system, it avoids electromagnetic interference. Its secured TPT25 torch (4 m) prevents accidental triggering and disconnects easily for transport. The unit benefits from enhanced protection against overvoltages and is compatible with generators, while offering a controlled noise level (60–70 dB).

favorite_border favorite
TELWIN l Drive 1500
Save 10%

In stock

Telwin

Reference: 829569

TELWIN l Drive 1500

€154.28

€171.42

127,50 € tax excl.

or 3 x 51,43 €

Free delivery

2-year warranty

Ultra-compact multifunctional portable lithium 12V emergency jump starter. Max. 1500 A cranking power. Equipped with high-performance batteries: fast and full recharge thanks to high-efficiency LiPo lithium polymer cells. Quick r

favorite_border favorite
GYS - MULTIWELD 320T welder with accessories
Save 10%

In stock

Gys

Reference: 079250

GYS - MULTIWELD 320T welder with accessories

€1,547.80

€1,719.77

1 279,17 € tax excl.

or 4 x 386,95 €

Free delivery

2-year warranty

Ideal for locksmiths and maintenance workshops
Welds steel, stainless steel and aluminium
MIG duty cycle: 240A at 60% / 200A at 100%
MMA duty cycle: 220A at 60% / 180A at 100%
Current range: 40 to 300A
Combines 3 welding processes in 1 unit:
- MIG/MAG with gas (steel/stainless wire Ø 0.6/0.8 to 1.2 mm and Alu 0.8 to 1mm)
- MIG/MAG without gas (flux-cored wire Ø 0.9 to 1.2 mm)
- MMA (basic and rutile electrode up to 6 mm)
4 rollers for Ø 200 mm (5 kg) or Ø 300 mm (15kg) spool
Removable 250A MAG torch (2T/4T) 3m long (8mm contact tip)
Digital interface with very intuitive settings
Compatible with 10kVA generator
Gas cylinder holder for cylinders up to 4m3
Three-phase power supply 400 V - 16 A
Dimensions: 77 x 79x 47 cm - 44kg
IP21 rating

Delivered with:
1 x 360 A 4m MB36 torch
1 x 400 Amp 4m ground clamp
1x User manual
2x 1.0/1.2 mm rollers

favorite_border favorite
GYS - GYSMI 160 P | MMA inverter welding machine
Save 10%

In stock

Gys

Reference: 030077

GYS - GYSMI 160 P | MMA inverter welding machine
(134 reviews)

€226.87

€252.08

187,50 € tax excl.

or 3 x 75,62 €

Free delivery

2-year warranty

Powerful and versatile
Duty cycle: 85A at 60% and 70A at 100%
Current range: 10 to 160A
Welds steel, cast iron and stainless steel up to 10 mm thickness
Compatible with rutile, stainless steel, cast iron and basic coated electrodes
Electrode diameter: 1.6 to 4 mm
Technologies: Hot Start, Arc Force, Antisticking, PROTEC 400
Power supply: 230 Volts 50/60 Hz - 16A -
Open-circuit voltage: 72 V
Weight: 6 kg - 2-year warranty

Supplied in a case with:
1x Cable with ground clamp (1.6 meters) 16mm² (10/25 mm² connector)
1x Cable with electrode holder (2 meters) 16mm² (10/25 mm² connector)
1x Shoulder strap

favorite_border favorite
LINCOLN - PACK Bester S171 inverter welding machine
Save 10%

In stock

Lincoln Electric

Reference: B18267-1P

LINCOLN - PACK Bester S171 inverter welding machine

€398.29

€442.55

329,17 € tax excl.

or 4 x 99,57 €

Free delivery

2-year warranty

Bester S171 generator
Shoulder strap
Sturdy and lightweight case
Wire brush
Chipping hammer
3m cable with electrode holder clamp (16 mm²)
Ground clamp with 3 m cable (16 mm²)

favorite_border favorite
ESAB - RENEGADE ET 210i PRO Advanced | - TIG Inverter welding machine cooled
Save 10%

In stock

ESAB

Reference: 0447750891

ESAB - RENEGADE ET 210i PRO Advanced | - TIG Inverter welding machine cooled

€2,776.95

€3,085.50

2 295,00 € tax excl.

or 4 x 694,24 €

Free delivery

2-year warranty

This ESAB Renegade ET 210Ip Advanced is a single-phase professional TIG welding machine with high-frequency ignition and MMA, with protection rating IP23, capable of being used even in the most demanding environments.

Thanks to its light weight, the various lifting points on the outer casing and the high-quality shoulder strap, the Renegade ET 210Ip Advanced can be easily transported.

Renegade ET 210Ip Advanced is equipped with an integrated active PFC circuit that allows it to be used even on a low-power supply or when an extension lead is used (length up to 100 m).

Easy to use. It offers direct access to parameter settings and features a
simple and intuitive user interface that allows you to read the parameters, even from a distance.

It enables MMA welding of rutile, basic, stainless steel, cast iron... and also cellulosic electrodes.

Technical specifications:

- High robustness with IP23 protection rating, for use in workshops and on job sites, in demanding environments

- Pulsed TIG up to 999 Hz to increase control of heat input and weld pool

- Integrated PFC circuit for a stable arc even with an extra-long power cable, up to 100 m

- Intuitive panel, quick to configure, for greater precision and reduced downtime

- Dual functionality - Current mode trigger to switch between two output current levels in order to control
heat input and weld pool size

- 4.3-inch colour screen with visual display of settings

- Easy access to up to 10 personal programs via the torch button

- Modular system to connect the cooling unit (optional) and the trolley (optional)
without tools

Examples of application sectors
Shipbuilding and offshore
Civil construction
Pipe manufacturing
Repair and maintenance
Heavy fabrication
Industrial and general manufacturing
Mining
Steel formwork

Delivered with:
1 EC 1001 cooling unit
1 earth clamp + 25 mm² cable 3 m long - 13 mm connector
1 strap for shoulder carrying of the unit when working at height + anchor points for lifting.
1 TIG torch Exeor SR 21, 4 m long
1 gas hose 4 m long 

Electrode holder optional

favorite_border favorite
LINCOLN - PACK 1 Bester S211 inverter welding machine
Save 10%

In stock

Lincoln Electric

Reference: B18268-1P

LINCOLN - PACK 1 Bester S211 inverter welding machine

€471.90

€524.33

390,00 € tax excl.

or 4 x 117,98 €

Free delivery

2-year warranty

Bester S211 generator
Shoulder strap
Sturdy and lightweight case
Wire brush
Chipping hammer
3m cable with electrode holder clamp (16 mm²)
Ground clamp with 3 m cable (16 mm²)

Back to top